
ReCamera S101 v1.1
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

reCamera is a series of open-source AI cameras.
ReCamera Gimbal is an open-source printed circuit board by Seeed-Studio, from the Seeed-Studio/OSHW-reCamera-Series repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 30 × 30 mm with 123 parts on 102 nets, routed with 514 tracks and 237 vias.
It is built around the MCP2558FD-H/SN, MP2315GJ-Z and BC856S, with the TPS22916CYFPR, CC0402KRX7R8BB104 and RC0402JR-070RL among its other parts. Its parts include 39 resistors, 36 capacitors, 6 ICs, 6 diodes and 4 transistors.
English | 简体中文

This repository is the hardware documentation and design-resource hub for the Seeed Studio reCamera product matrix:
reCamera 2002 / 2002w and reCamera Pro are concurrently sold product families for different application and performance requirements. This repository does not describe them as replacement generations.
| reCamera 2002 / 2002w | reCamera Pro | |
|---|---|---|
| Processor | Sophgo SG2002 | Rockchip RV1126B |
| CPU | Dual C906 RISC-V cores | Quad-core Cortex-A53 at 1.2GHz |
| AI acceleration | 1 TOPS INT8 | 3 TOPS NPU |
| Memory | 256MB | 2GB / 4GB LPDDR4 |
| Standard camera | OV5647, 5MP | SC850SL, 8MP, 4K at 30fps |
| Hardware model | Interchangeable core, sensor, and base boards | Integrated camera with expansion interfaces |
| Documentation | reCamera 2002 hardware | reCamera Pro hardware |
| Standard reCamera 2002 | reCamera 2002 HQ PoE | reCamera Gimbal 2002w |
|---|---|---|
![]() | ![]() | ![]() |
| Fixed camera; B101 base | GC2053 sensor; Ethernet and PoE | Two-axis brushless gimbal; B401 CAN base |
The repository contains editable KiCad sources, schematic PDFs, mechanical files, and revision notes for the C1 core, S-series sensor boards, B-series base boards, and Gimbal mechanical/power hardware. See the reCamera 2002 / 2002w product index.
Buy reCamera Pro 2GB from Seeed Studio
The repository currently provides an official-specification snapshot, polished storefront product images, and technical interface images for reCamera Pro. Editable Pro PCB and mechanical source files should be added only when an approved hardware release is available.
.
|-- hardware/
| |-- recamera-2002/ # reCamera 2002 family board and mechanical sources
| `-- recamera-pro/ # reCamera Pro family specifications and images
|-- docs/ # Official sources and maintenance policy
|-- .github/workflows/ # Repository administration
|-- CONTRIBUTING.md
`-- LICENSEThis is a pure hardware repository. If you need to access software-related repositories, please visit the official website. reCamera documentObtain these resources from the Seeed Studio software repository.
Gimbal and HQ PoE are product forms within the reCamera 2002 family. Their
product-specific hardware is documented under hardware/recamera-2002/products/
and linked to shared boards.
Hardware summaries are reviewed against official Seeed Studio product and Wiki pages. See docs/OFFICIAL_SOURCES.md for the source list and review date. A currently shipped product page takes precedence over a repository snapshot when specifications or available configurations change.
Contributions must follow CONTRIBUTING.md. Unless a file says otherwise, repository content is provided under the Apache License 2.0.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Test Point | Misc:TP-D45MIL | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15 |
| 13 | 100nF | Capacitor:C0402 | C3, C5, C8, C12, C15, C16, C18, C24, C26, C28, C30, C34, C36 |
| 12 | 0R | Resistor:R0402 | R11, R13, R20, R21, R22, R23, R24, R25, R26, R31, R32, R39 |
| 8 | 4.7uF | Capacitor:C0603 | C13, C14, C19, C23, C25, C27, C29, C35 |
| 6 | 100K | Resistor:R0402 | R6, R19, R35, R36, R37, R38 |
| 4 | 0R | Inductor:L0805 | FB2, FB3, FB4, FB5 |
| 3 | 100nF | Capacitor:C0603 | C2, C17, C32 |
| 3 | 33pF | Capacitor:C0402 | C9, C10, C11 |
| 3 | 4.7K | Resistor:R0402 | R27, R28, R29 |
| 2 | 15pF | Capacitor:C0402 | C21, C22 |
| 2 | 20K | Resistor:R0402 | R7, R15 |
| 2 | 20R | Resistor:R0402 | R8, R12 |
| 2 | 22uF | Capacitor:C0805 | C6, C7 |
| 2 | 5.1K | Resistor:R0402 | R1, R2 |
| 2 | 5.1R | Resistor:R0402 | R3, R4 |
| 2 | 62R | Resistor:R0805 | R33, R34 |
| 2 | BC856S | Transistor:SOT-363 | U5, U6 |
| 2 | ESDPSA0402V05 | Diode:ESD-0402 | D1, D2 |
| 2 | RQ3E120ATTB | Mosfet:DFN8P-0.65-3X3X0.8MM | Q3, Q4 |
| 2 | TD-1100AP-A4N-D1R | Switch:SW5-SMD-4.56X2.3X1.9MM | K1, K2 |
| 2 | TPD1E10B06DPYR | Diode:ESD-0402 | D3, D6 |
| 1 | 10pF | Capacitor:C0402 | C20 |
| 1 | 11k | Resistor:R0402 | R14 |
| 1 | 120R | Inductor:L0402 | FB1 |
| 1 | 1K | Resistor:R0402 | R18 |
| 1 | 1M | Resistor:R0402 | R30 |
| 1 | 1nF | Capacitor:C0402 | C4 |
| 1 | 1uF | Capacitor:C0805 | C33 |
| 1 | 22uF | Capacitor:C1210 | C1 |
| 1 | 33K | Resistor:R0402 | R16 |
| 1 | 4.7nF | Capacitor:C0402 | C31 |
| 1 | 40.2K | Resistor:R0402 | R9 |
| 1 | 40MHz | Crystal:X4-SMD-2.0X1.6MM | X1 |
| 1 | 47K | Resistor:R0402 | R17 |
| 1 | 5.6uH-20% | Inductor:INT2-SMD-4.2X4.4X1.8MM | L1 |
| 1 | 7.5k | Resistor:R0402 | R10 |
| 1 | 75K | Resistor:R0402 | R5 |
| 1 | 90R | Inductor:INT4-0.85-2X1.25X1.2MM | L2 |
| 1 | ANT Connect | Misc:ANTENNA-5P-13.5X6.5X6.5MM | ANT2 |
| 1 | CJ2101 | Mosfet:SOT-323 | Q2 |
| 1 | FF-1025 | Connector:H4-2.54-65_35MIL | J3 |
| 1 | LMUN5233T1G | Transistor:SOT-323 | Q1 |
| 1 | MCP2518FDT-E/QBB | Ic:VDFN14-0.65-4.5X3X0.85MM | U2 |
| 1 | MCP2558FD-H/SN | Ic:SOIC8-1.27-5X4MM | U3 |
| 1 | MP2315GJ | Ic:TSOT23-8 | U1 |
| 1 | PCAQ4520MB-142 | Inductor:INT4-1.5-4.75X4.5X2MM | L3 |
| 1 | SM05-7 | Diode:SOT-23 | D5 |
| 1 | SM06B-SRSS-TB(LF)(SN) | Connector:SMD-SH1.0-6P-90D | J2 |
| 1 | SMBJ24CA | Diode:DO-214AA_SMB | D4 |
| 1 | ST-BTB-058060-A | Connector:BTB60-Male-Female-0.5-17.7x4.4mm | J1 |
| 1 | TPS22916CYFPR | Ic:WLCSP4-0.4-0.77X0.77X0.33MM | U4 |
| 1 | U.FL-R-SMT-1 | Connector:U-FL3P-SMD-2.6X2.6X1.0MM | ANT1 |
| 1 | USB-31C-F-16P-L7.35 | Connector:USB2.0-TYPE-C | USB1 |

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.


embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products


MidwestMotorBoy/Battery-Bank
Monolith: an ultralight IP67 power bank for backpacking. 4S BAK 65E 21700 (91 Wh, under the 100 Wh airline limit), two bidirectional 100 W USB-C PD ports, Bluetooth LE (TI CC2340) with an iPhone app.


sdp8483/joule_thief_breakout_boards
Breakout Boards for Joule Thief Development

MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.

MicroType-Engineering/MTE_USB_HUB
As designed on the MicroType Engineering's YouTube series: https://youtu.be/uzqXgHHZUUs
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
123 parts, built around the MCP2558FD-H/SN, MP2315GJ-Z, BC856S and TPS22916CYFPR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Seeed-Studio/OSHW-reCamera-Series repository on GitHub, at the commit this page was made from: the board is hardware/recamera-2002/base/b401-can/PCB/B4_v0.2/reCamera Gimbal.kicad_pcb and its schematic hardware/recamera-2002/base/b101-default/PCB/V1.0/reCamera B101 v1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).