Skip to the content
12345678

MP2315GJ-Z

Monolithic Power SystemsExtended

-40℃~+125℃ 1 180uA 3A 4.5V~24V 500kHz 800mV~22.8V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator Step-down type Yes TSOT-23-8 DC-DC Converters ROHS

Part id
mps/MP2315GJ-Z
Category
DC DC Converters
Package
TSOT-23-8
Pins
8
In stock
482 at JLCPCB (C45889)
Used on
13 open-source boards

Overview

The MP2315GJ-Z is a DC DC Converter made by Monolithic Power Systems in a TSOT-23-8 package with 8 pins. -40℃~+125℃ 1 180uA 3A 4.5V~24V 500kHz 800mV~22.8V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator Step-down type Yes TSOT-23-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MPQ2315GJ-Z, from EasyEDA) and its footprint (Package_TO_SOT_SMD:TSOT-23-8, from KiCad's library), ready for a KiCad board. 482 are in stock at JLCPCB (part C45889). 13 open-source boards in 10 repositories on GitHub use it.

Symbol

1AAM2IN3SW4GND5BST6EN/SYNC7VCC8FB
EasyEDA_Cloud:MPQ2315GJ-ZFrom EasyEDA

Footprint

12345678
Package_TO_SOT_SMD:TSOT-23-8From KiCad's library

Pinout

8
The pins of the MP2315GJ-Z
PinNameType
1AAMUnspecified
2INUnspecified
3SWUnspecified
4GNDUnspecified
5BSTUnspecified
6EN/SYNCUnspecified
7VCCUnspecified
8FBUnspecified

Open-source boards using it

13See all 13
  • 2 layers30 × 30 mmReCamera Gimbal, the printed circuit board in 3D

    ReCamera Gimbal

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    123 parts495Apache-2.0
  • 4 layers34 × 40 mmWingFC, the printed circuit board in 3D

    WingFC

    BryanSouza91/WingFC

    WingFC is an open-source embedded flight controller for sub-250g fixed-wing aircraft, built with TinyGo. It provides stabilization, mixing, and safety features for elevon-equipped models, with a focus on reliability and…

    38 parts10MIT
  • 2 layers110 × 83.7 mmRAMPS STM32F407 TFT Touch, the printed circuit board in 3D

    RAMPS STM32F407 TFT Touch

    Jarins/STM32F407-RAMPS

    RAMPS for STM32F407ZE_ZG Dev. Board Black edition

    104 parts7GPL-3.0
  • 2 layers71.7 × 75.3 mmPi HAT V2, the printed circuit board in 3D

    Pi HAT V2

    danielwilczak101/EasyControls

    Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

    42 parts4
  • 2 layers33 × 87.9 mmPcb top, the printed circuit board in 3D

    Pcb top

    NicolasFavero/AutonomousAircraftControlSystem

    Embedded flight control and telemetry system for an autonomous aircraft prototype based on ESP32-S3.

    21 parts1
  • 2 layers181.1 × 244 mmMain MagicAlonso rounded, the printed circuit board in 3D

    Main MagicAlonso rounded

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    412 partsMIT
  • 6 layers47.6 × 41.5 mmOLL.E fpv pcb, the printed circuit board in 3D

    OLL.E fpv pcb

    Tamim101/ardupilot-drone-pcb

    141 parts
  • 2 layers47.6 × 41.5 mmOLL.E fpv pcb, the printed circuit board in 3D

    OLL.E fpv pcb

    Tamim101/flight-controller-PCB

    130 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MP2315GJ-Z?

Yes. The symbol is EasyEDA_Cloud:MPQ2315GJ-Z and the footprint Package_TO_SOT_SMD:TSOT-23-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MP2315GJ-Z?

TSOT-23-8, with 8 pins. Its footprint is drawn on this page.

Where is the MP2315GJ-Z datasheet?

Monolithic Power Systems publishes it: the Datasheet link on this page opens it.

Where can I order the MP2315GJ-Z?

JLCPCB lists it as part C45889, with 482 in stock; the sellers' links on this page open their listings.

What can replace the MP2315GJ-Z?

Parts like it in the library: the MP2143DJ-LF-Z by Monolithic Power Systems, the MP1495SGJ-Z by Monolithic Power Systems, the MP2225GJ-Z by Monolithic Power Systems and the RT7296FGJ8F by Richtek Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MP2315GJ-Z?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.