Skip to the content

Boards using the MP2315GJ-Z

13 boards

Boards in 10 GitHub repositories, designed in KiCad, that use the MP2315GJ-Z by Monolithic Power Systems (-40℃~+125℃ 1 180uA 3A 4.5V~24V 500kHz 800mV~22.8V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator Step-down type Yes TSOT-23-8 DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the MP2315GJ-Z’s symbol, footprint and pinout are on its own page.

  • 2 layers30 × 30 mmReCamera Gimbal, the printed circuit board in 3D

    ReCamera Gimbal

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    123 parts495Apache-2.0
  • 4 layers34 × 40 mmWingFC, the printed circuit board in 3D

    WingFC

    BryanSouza91/WingFC

    WingFC is an open-source embedded flight controller for sub-250g fixed-wing aircraft, built with TinyGo. It provides stabilization, mixing, and safety features for elevon-equipped models, with a focus on reliability and…

    38 parts10MIT
  • 2 layers110 × 83.7 mmRAMPS STM32F407 TFT Touch, the printed circuit board in 3D

    RAMPS STM32F407 TFT Touch

    Jarins/STM32F407-RAMPS

    RAMPS for STM32F407ZE_ZG Dev. Board Black edition

    104 parts7GPL-3.0
  • 2 layers71.7 × 75.3 mmPi HAT V2, the printed circuit board in 3D

    Pi HAT V2

    danielwilczak101/EasyControls

    Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

    42 parts4
  • 2 layers33 × 87.9 mmPcb top, the printed circuit board in 3D

    Pcb top

    NicolasFavero/AutonomousAircraftControlSystem

    Embedded flight control and telemetry system for an autonomous aircraft prototype based on ESP32-S3.

    21 parts1
  • 2 layers181.1 × 244 mmMain MagicAlonso rounded, the printed circuit board in 3D

    Main MagicAlonso rounded

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    412 partsMIT
  • 6 layers47.6 × 41.5 mmOLL.E fpv pcb, the printed circuit board in 3D

    OLL.E fpv pcb

    Tamim101/ardupilot-drone-pcb

    141 parts
  • 2 layers47.6 × 41.5 mmOLL.E fpv pcb, the printed circuit board in 3D

    OLL.E fpv pcb

    Tamim101/flight-controller-PCB

    130 parts
  • 2 layers41.7 × 28.4 mmBoardone, the printed circuit board in 3D

    Boardone

    teja120805-cyber/sensore-26

    Captures webcam frames on the Pi, runs your trained YOLOv8 pothole-detection model, computes a severity score from the bounding box, tags the detection with a position, and POSTs it to the PaveSight backend (POST…

    28 parts
  • 2 layers71.7 × 71.3 mmPi HAT V3, the printed circuit board in 3D

    Pi HAT V3

    danielwilczak101/EasyControls

    Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

    35 parts4
  • 2 layers71.7 × 71.3 mmPi HAT V4, the printed circuit board in 3D

    Pi HAT V4

    danielwilczak101/EasyControls

    Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a…

    28 parts4
  • 2 layers70 × 73 mmRP Pico robot, the printed circuit board in 3D

    RP Pico robot

    Amir-imani/Autonomous-Mobile-Robot

    Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.

    51 parts
  • 2 layers89 × 113.7 mmMain MagicAlonso, the printed circuit board in 3D

    Main MagicAlonso

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    103 partsMIT