Skip to the content
2 layers52.5 × 47.5 mmAlveoU25 JTAG Adapter, the printed circuit board in 3D

AlveoU25 JTAG Adapter

mwrnd/AlveoU25_JTAG_Adapter5

Alveo U25 Debug Connector to Xilinx JTAG and UART and I2C Adapter

Size
52.5 × 47.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
41
Pads
124
Tracks, vias
485, 166
Pours
10
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Mar 2023
Updated
6 Jul 2026

Overview

AlveoU25 JTAG Adapter is an open-source printed circuit board by mwrnd, from the mwrnd/AlveoU25_JTAG_Adapter repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 52.5 × 47.5 mm with 21 parts on 41 nets, routed with 485 tracks and 166 vias.

It is built around the 74AVC4T774PWJ. Its parts include 9 resistors, 8 connectors, 2 capacitors and 2 ICs. It belongs with the interfaces and adapters and fPGA and programmable logic boards of this library.

Main components

1

README

README.md

Work-In-Progress : Design manufactured and works but discovered the PCB needs to be 0.8mm (1/32") in order to fit between the Alveo PCB and heatsink. Third Revision is being manufactured.

AlveoU25_JTAG_Adapter

Alveo U25 Debug Connector to Xilinx JTAG, UART, and I2C. PCB must be manufactured with a 0.8mm (1/32") thickness.

Alveo U25 JTAG Adapter

I have successfully used it to debug and program an Alveo U25.

Alveo U25 JTAG Adapter in Use

The pinout is not available publicly so the signals had to be traced out.

Tracing Alveo U25 JTAG Signals

Schematic

Schematic

PCB Layout

PCB Layout

Bill Of Materials

Necessary:

Designator(s)Part NumberQuantityFootprintAvailability
U1MEC8-113-02-L-D-RA11MEC8-113-02-L-DTrustedParts
J1SBH21-NBPN-D07-ST-BK1SBH21-NBPN-D07-STTrustedParts
U574AVC4T774PW1TSSOP-16TrustedParts
R14, R15RNCP0603FTD10K020603TrustedParts
C4, C5CL10B104JB8NNNC20603TrustedParts
JP1, JP2PPTC061LFBN-RC21x06_2.54mmTrustedParts
xAdafruit 44711None - ModuleTrustedParts

Optional:

Designator(s)Part NumberQuantityFootprintAvailability
J5, J7PPTC061LFBN-RC21x06_2.54mmTrustedParts
J3, J4PPTC042LFBN-RC22x04_2.54x2.54mmTrustedParts
J6PREC002DAAN-RC12x02_2.54mmTrustedParts
x, xSTC02SYAN2None - JumperTrustedParts

Previous Version

v0.1-alpha was a basic breakout board for the Alveo U25 Debug Connector. It was never manufactured or tested.

Only two components would have been required: MEC8-113-02-L-D-RA1 and SBH21-NBPN-D07-ST-BK.

Alveo U25 to Xilinx JTAG Adapter

Parts

21
QtyValueFootprintReferences
70Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R6, R7, R9
4Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ5, J7, JP1, JP2
20u1Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4, C5
210kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR14, R15
2Conn_02x04_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ3, J4
174AVC4T774PWPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU5
1Alveo_U25_DebugMEC8-113-L-D-RA:MEC8-113-02-L-D-RA1U1
1Conn_02x02_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalJ6
1Xilinx_JTAGXilinx_JTAG_Connector:SBH21-NBPN-D07-STJ1

Similar boards

  • 6 layers130.8 × 75 mmMradio, the printed circuit board in 3D

    Mradio

    umrover/mradio

    200 parts1
  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT

Questions

How big is the AlveoU25 JTAG Adapter PCB?

It measures 52.5 × 47.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AlveoU25 JTAG Adapter use?

21 parts, built around the 74AVC4T774PWJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AlveoU25 JTAG Adapter KiCad files?

From the mwrnd/AlveoU25_JTAG_Adapter repository on GitHub, at the commit this page was made from: the board is AlveoU25_JTAG_Adapter.kicad_pcb and its schematic AlveoU25_JTAG_Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AlveoU25 JTAG Adapter design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).