4 layers45 × 69 mm
OpenVault
NoctaLabs-Sh/Nocta-One-Hardware
Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.
64 parts1CERN-OHL-S-2.0
PCB
2,721 boardsKiCad boards from 1,297 GitHub repositories tagged “pcb”, the most starred first; open any of them in PCBKit.
- 4 layers48 × 33 mm
Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 2 layers51.5 × 32 mm
Frostbyte USB hub
oSnwy/Frostbyte-USB-hub
A custom icy-themed USB 2.0 hub with USB-C and USB-A ports, built around the SL2.1A hub controller and packaged in a custom 3D-printed case.
31 parts1MIT - 2 layers160 × 160 mm
Estop driver
OUXT-Polaris/estop-driver
PCB design files for a board that brings an emergency stop function with mechanical relays to the power supply of an autonomous mobile robot.
157 parts1MIT - 2 layers47.2 × 53.3 mm
- 2 layers96.5 × 96.5 mm
Mat1
paliichukvladyslav/led-matrix-5x4
A simple 5x4 LED matrix board based on ULN2003, TD62783A, 74HC595.
36 parts1WTFPL - 2 layers77 × 41 mm
- 4 layers32 × 66 mm
Sombrero MSX Goa'uld
Papipapito/MSXgoauld_fusion
Placas MSX Goa'uld SD (Tang Nano 20K) con conector ZIF FFC de 40 vías: en el zócalo del Z80 o por cable con goauldext. Versiones 1.7b, 1.8N y 1.8S. Derivado de jabadiagm (GPL-3.0).
20 parts1GPL-3.0 - 2 layers154.2 × 151.7 mm
Bandfilter
paulh002/low-pass-filter-board-esp32-arduino
Lowpass filter board managed by ESP32
97 parts1 - 2 layers54.4 × 47.6 mm
- 2 layers119.3 × 54.5 mm
- 2 layers50.8 × 22.9 mm
Hardware Hackathon 1.0
pcbcupid/Hackathon-Keychain
It's a giveaway done for Hardware Hackathon 1.0
15 parts1MIT - 2 layers75 × 50 mm
High voltage driver V1.0
PinBus/high-voltage_driver_board
This board has four independant high voltage drivers. These boards were designed to drive pinball machine solenoids, but their use is not limited to pinball machines.
33 parts1GPL-3.0 - 2 layers61 × 81 mm
Piperpad
PriyanshuPz/piperpad
PiperPad is a tiny 3×3 hackpad with per-key RGB and a personality.
19 parts1 - 4 layers85 × 56 mm
BratwurstPower
Qeteshpony/BratwurstPower
A power supply for a complete, Raspberry Pi based ADS-B Receiver Setup with independent power rails for the different components.
143 parts1BSD-2-Clause - 2 layers66 × 68.6 mm
FP2800A Tester
Qeteshpony/FP2800A-Tester
Arduino Uno compatible shield for testing functionality of a FP2800A
99 parts1BSD-2-Clause - 2 layers50 × 64 mm
USB Cable Tester
Qeteshpony/USB-C-Cable-Tester
Small passive device for determining the capabilities of a USB-C Cable
45 parts1BSD-2-Clause - 2 layers67 × 23.5 mm
LM2596 Buck Converter
ramuroy/LM2596-5V-Buck-Converter-PCB-Design
5 V switching regulator PCB around the LM2596S-5.0 — wide input range, output filtering. KiCad schematic, layout and gerbers.
17 parts1MIT - 2 layers50.6 × 21.8 mm
9W LED driver
RandomDelta6/9w_LED_Driver_PCB
Si9752 based LED driver board designed for driving a 9w LED array
27 parts1CC-BY-SA-4.0 - 2 layers42 × 49.5 mm
- 4 layers22.9 × 63 mm
RP2040 Motion Logger
rishikesh2715/RP2040_Motion_Logger
An RP2040 based microcontroller with an ICM-42688 IMU, 1S Battery Charger, SD Card Connector, RGB Led, and USB Type-C connector
70 parts1MIT - 2 layers
Nanosaur NX shield
rnanosaur/nanosaur-NX-shield
🦸 A nanosaur NX, need a super shield. The Nanosaur NX shield is here!
28 parts1 - 2 layers51 × 65.5 mm
Smiley
Rob-Sligter/Smiley-LED-PCB
This repo contains my first PCB design, a smiley face board with LEDs controlled by a TLC5947 driver chip.
28 parts1 - 2 layers104.5 × 81.9 mm
PlacaMotores
Robot-Sumo/SumoPontifice-Hardware
Diseño en Kicad de los circuitos impresos (PCB's) utilizadas para la elaboración del Robot-Sumo.
56 parts1