
OpenVault
NoctaLabs-Sh/Nocta-One-Hardware
Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.

Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.
OpenVault is an open-source printed circuit board by NoctaLabs-Sh, from the NoctaLabs-Sh/Nocta-One-Hardware repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 45 × 69 mm with 64 parts on 100 nets, routed with 535 tracks and 92 vias.
It is built around the TPS62840DLCR, W25Q128JVSIQ and NPM1300-QEAA-R, with the TROPIC01, USBLC6-2SC6 and MBR0530 among its other parts. Its parts include 28 capacitors, 8 resistors, 6 ICs, 5 connectors and 3 diodes. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Open hardware for the Nocta vault: an offline password and credential manager with a 2.7 inch e-ink screen, optional Bluetooth LE, and no cloud service behind it.
This repository is the design, not a product. The device is a prototype, it is not for sale, and there is no ship date.
Built by Nocta Labs, Leuven, Belgium.
| Path | What it is |
|---|---|
Hardware/OpenVault.kicad_sch | Schematic, KiCad |
Hardware/Schematic.pdf | The same schematic, readable without KiCad |
Hardware/OpenVault.kicad_pcb | Board layout, KiCad |
Hardware/production/ | Fabrication packages: gerbers, positions, BOMs |
Hardware/3D/ | STEP models for individual component packages |
Hardware/Datasheets/ | Datasheets for the parts used |
Hardware/Footprints/, Symbols/ | Project libraries |
CERN Open Hardware Licence Version 2, Strongly Reciprocal
(CERN-OHL-S-2.0). Strongly reciprocal means anything you make from this and
distribute has to stay open under the same terms. That is deliberate.
Open Hardware/OpenVault.kicad_pro in KiCad 8 or later, or start with
Hardware/Schematic.pdf if you just want to read it. The fabrication packages
under Hardware/production/ are what actually went to the board house.
AI assistance, primarily Anthropic's Claude, is used in the development of this hardware.
Its role is limited to review and analysis: reading datasheets and verifying pin assignments and component values against them, reviewing the schematic and the board layout, triaging ERC and DRC output, maintaining helper scripts, and drafting documentation.
Component selection, the board stackup, the USB differential pair impedance and
all security related decisions are made by the maintainers. No AI system commits
to this repository, and every change is reviewed by a maintainer before it
reaches main.
No part of this design has been validated by an AI system, and maintainer review does not amount to electrical or security qualification. The design should be read against the component datasheets and verified independently before fabrication or use. The warranty and liability disclaimers in the licence apply in full.
Contributions developed with AI assistance are accepted, provided the use is disclosed in the pull request and the contributor can account for the work submitted.
Open an issue. A mistake found in the schematic now is worth more to us than a compliment later :)
For anything sensitive, mail hello@noctalabs.sh first and we will credit you publicly once it is fixed.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 4u7/25V | Capacitor_SMD:C_0805_2012Metric | C8, C9, C10, C14, C15, C16, C20, C21, C22 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C24, C25 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5 |
| 4 | 1uF/50V | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C23 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R5, R8 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C7 |
| 2 | 2.2uH | OpenVaultFootprints:IND-SMD_L2.0-W1.6 | L1, L3 |
| 2 | 22uF/25V | Capacitor_SMD:C_0805_2012Metric | C27, C28 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 1 | 0R47 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10uH1A | Inductor_SMD:L_Sunlord_SWPA4030S | L2 |
| 1 | 267K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 330K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C26 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | HC-FPC-05-09-24RLTAG | OpenVaultFootprints:FPC-SMD_24P-P0.50_HC-FPC-05-09-24RLTAG | J03 |
| 1 | JUSHUO AFC01-S06FCC-00 | OpenVaultFootprints:FPC-SMD_AFC01-S06FCC-00 | J4 |
| 1 | NPM1300-QEAA-R | SamacSys_Parts:QFN50P500X500X90-33N | IC1 |
| 1 | NTC 10K | Inductor_SMD:L_0402_1005Metric | TH1 |
| 1 | SKSCLBE010 | OpenVaultFootprints:KEY-SMD_4P-SKSCLXX010 | SW2 |
| 1 | STM32WB5MMGH6TR | RF_Module:ST-SiP-LGA-86-11x7.3mm | IC2 |
| 1 | Si1308EDL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J5 |
| 1 | TPS62840DLCR | OpenVaultFootprints:VSON-8_L2.0-W1.5-P0.50-BL | U2 |
| 1 | TROPIC01 | Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm | IC3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |

NoctaLabs-Sh/Nocta-One-Hardware
Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.


tropicsquare/devboards
Repository collects hw resources for development boards which are available for the TROPIC01 chip

keycard-tech/keycard-shell
Modular, fully open hardware wallet




aliaksei-lameyka/ENKU-Clock
Open, repairable, local-first e-paper alarm clock.

madkoding/slimestuff
SlimeVR resources hub. Scripts, utilities, and complement documentation for the SlimeVR ecosystem.
It measures 45 × 69 mm and has 4 copper layers, 1.59 mm thick.
64 parts, built around the TPS62840DLCR, W25Q128JVSIQ, NPM1300-QEAA-R and TROPIC01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NoctaLabs-Sh/Nocta-One-Hardware repository on GitHub, at the commit this page was made from: the board is Hardware/_restore_backup_2026-08-01T17-46-38-099/OpenVault.kicad_pcb and its schematic Hardware/OpenVault.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).