2 layers19.6 × 38.6 mm
Epaper-102
Nicell/epaper-102
Display module for the Good Display or Waveshare 1.02 inch e-ink display
20 parts91MIT
E ink
11 boardsKiCad boards from 8 GitHub repositories tagged “e-ink”, the most starred first; open any of them in PCBKit.
- 2 layers47.2 × 55.5 mm
Tinta l2
c0de111/tinta
Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.
60 parts39Apache-2.0 - 4 layers62.5 × 96.2 mm
- 2 layers105.8 × 53.8 mm
Progetto
LucaBenzi/orologio-eink
Orologio da tavolo e-ink con ESP32-C3, batteria LiFePO4 e sync NTP - 2 anni di autonomia con una ricarica USB-C
63 parts2MIT - 2 layers41.4 × 60.3 mm
Freezer display pcb
NemoAndrea/freezer-display
Open hardware freezer display primarily intended for freezers used in research labs for biosample storage.
3 parts1 - 4 layers45 × 69 mm
OpenVault
NoctaLabs-Sh/Nocta-One-Hardware
Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.
64 parts1CERN-OHL-S-2.0 - 2 layers40 × 20 mm
B E PAPER DRIVER 24 PINS BRK R1.0
Boardoza/Boardoza_E_Paper_Driver_24_Pin_E_Paper_Display_Driver_Breakout_Board
E-Paper Driver 24 Pin is a compact low-power E-Paper display driver breakout board with integrated voltage booster and SPI interface.
25 partsCC-BY-SA-4.0 - 2 layers117 × 60 mm
- 2 layers47.2 × 55.5 mm
Inki
c0de111/tinta
Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.
54 parts39Apache-2.0 - 4 layers45 × 69 mm
OpenVault
NoctaLabs-Sh/Nocta-One-Hardware
Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.
54 parts1CERN-OHL-S-2.0 - 2 layers65 × 30.5 mm
