Skip to the content
2 layers119.3 × 54.5 mmExciter, the printed circuit board in 3D

A SSB exciter board

Size
119.3 × 54.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
90
Nets
56
Pads
223
Tracks, vias
332, 173
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Oct 2020
Updated
30 Oct 2020

Overview

Exciter is an open-source printed circuit board by paulh002, from the paulh002/SSB-EXCITER repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 119.3 × 54.5 mm with 90 parts on 56 nets, routed with 332 tracks and 173 vias.

It is built around the BAT54S. Its parts include 37 resistors, 22 capacitors, 8 transistors, 7 connectors and 4 diodes.

Main components

1

README

kicad/readme.md

Exciter board

Parts

90
QtyValueFootprintReferences
140.1uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC1, C3, C4, C7, C10, C12, C14, C16, C17, C18, C19, C20, C21, C22
52.2kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR7, R9, R17, R25, R30
547Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR8, R10, R28, R38, R39
4 MountingHole:MountingHole_3.2mm_M3 , , ,
41kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR5, R14, R19, R27
4220Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR2, R3, R24, R31
42N3904Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
481Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR12, R13, R22, R23
4BAT54SPackage_TO_SOT_SMD:SOT-23D1, D2, D3, D4
310Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1, R15, R20
3100Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR16, R29, R34
310uCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC2, C5, C15
31uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC6, C8, C9
3BFR92Package_TO_SOT_SMD:SOT-23Q5, Q6, Q7
3T50-6Transformer_THT:Transformer_Toroid_Horizontal_3S_D14.0mm_Amidon-T50T3, T4, T5
212Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR35, R37
2470Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR18, R32
293Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR11, R21
2MFConnector_Coaxial:SMA_Amphenol_132134_VerticalJ6, J7
1100Potentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV2
11000pCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC11
110kPotentiometer_THT:Potentiometer_ACP_CA9-H2,5_HorizontalRV1
110kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR4
1390Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR33
13uInductor_SMD:L_Bourns-SRN4018L1
14.7kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR6
147uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC13
1BFG135aPackage_TO_SOT_SMD:SOT-223Q8
1BFO inConnector_Coaxial:SMA_Amphenol_132134_VerticalJ5
1MicTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_HorizontalJ3
1PWRTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_HorizontalJ1
1T50-43Transformer_THT:Transformer_Toroid_Horizontal_3S_D14.0mm_Amidon-T50T1
1T50-43fm-detector:Transformer_Toroid_Horizontal_4S_D14.0mm_Amidon-T50T2
1Xtal inConnector_Coaxial:SMA_Amphenol_132134_VerticalJ4
1Xtal outConnector_Coaxial:SMA_Amphenol_132134_VerticalJ2

Similar boards

  • 2 layers58.2 × 38.1 mmUsb sniffer, the printed circuit board in 3D

    Usb sniffer

    ataradov/usb-sniffer

    Low-cost LS/FS/HS USB sniffer with Wireshark interface

    87 parts1.3kBSD-3-Clause
  • 4 layers94.4 × 72.8 mmRP2040 base, the printed circuit board in 3D

    RP2040 base

    Twisted-Fields/rp2040-motor-controller

    A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

    325 parts419
  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 2 layers100 × 99.8 mmUnderdog, the printed circuit board in 3D

    Underdog

    turboedge/SpeedyBoards

    EMS boards powered by Speeduino

    396 parts110GPL-2.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0
  • 6 layers71.5 × 63.6 mmSensorboard, the printed circuit board in 3D

    Sensorboard

    CameraNexus/sitina1

    Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…

    426 parts82MIT
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76
  • 4 layers137 × 79.5 mmTGX4, the printed circuit board in 3D

    TGX4

    hexeguitar/TGX4

    Teensy 4 based guitar amp emulator

    297 parts66

Questions

How big is the Exciter PCB?

It measures 119.3 × 54.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Exciter use?

90 parts, built around the BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Exciter KiCad files?

From the paulh002/SSB-EXCITER repository on GitHub, at the commit this page was made from: the board is kicad/exciter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Exciter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).