

Estop driver
PCB design files for a board that brings an emergency stop function with mechanical relays to the power supply of an autonomous mobile robot.
- Size
- 160 × 160 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 157
- Nets
- 100
- Pads
- 405
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Aug 2021
- Updated
- 26 Aug 2021
Overview
Estop driver is an open-source printed circuit board by OUXT-Polaris, from the OUXT-Polaris/estop-driver repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 160 mm with 157 parts on 100 nets.
It is built around the K7805-2000R3, 74HC00D and 74HC02, with the 74HC14, 74HC74D and BC817 among its other parts. Its parts include 61 resistors, 33 diodes, 30 transistors, 12 capacitors and 11 connectors.
Main components
7K7805-2000R3
SIP,11.5x9mm-40℃~+85℃ 1 1000uF 200uA 2A 45mVp-p 5V 8V~36V 92% Buck Short Circuit Protection ±1% SIP,11.5x9mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC02
-- Logic Gates ROHSonsemiLogic Gates74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip FlopsBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
README.mdestop-driver
PCB design files for a board that brings an emergency stop function with mechanical relays to the power supply of an autonomous mobile robot.
Parts
157| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R12, R13, R16, R17, R18, R19, R21, R27, R29, R31, R33, R35, R37, R41, R42 +7 |
| 15 | 47 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R20, R26, R28, R30, R38, R39, R40, R47, R48, R49, R54, R55, R60, R61 |
| 12 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q6, Q16, Q17, Q18, Q22, Q23, Q24, Q25, Q26, Q29, Q30 |
| 11 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5, D7, D10, D11, D12, D25, D26, D27, D32, D33 |
| 10 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q7, Q10, Q13, Q19, Q20, Q21, Q27, Q28 |
| 9 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R10, R22, R25, R44, R45, R46, R58, R59 |
| 9 | D | Diode_SMD:D_SOD-123 | D2, D6, D8, D9, D22, D23, D24, D30, D31 |
| 8 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | D_TVS | Diode_SMD:D_SMA | D14, D16, D18, D19, D20, D21, D28, D29 |
| 6 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R8, R9, R23, R24 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32, R34, R36, R50, R52 |
| 5 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q8, Q11, Q14 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C5, C8, C9 |
| 3 | 100u | Capacitor_SMD:C_Elec_8x5.4 | C10, C11, C12 |
| 3 | D_Schottky | Diode_SMD:D_SMA | D13, D15, D17 |
| 3 | G7EB | MechRelay:G7EB-1A | K1, K2, K3 |
| 3 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q9, Q12, Q15 |
| 2 | 10u 35V | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15 |
| 2 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J2, J3 |
| 2 | D_Schottky | Diode_SMD:D_SMC | D3, D4 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 22u 10V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 74HC00 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | 74HC02 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 74HC74 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Fuse | Fuse:RSPRO_1884617_plus_fuse | F1 |
| 1 | K7805-2000R3 | SuperRegulator:RSPRO_K78xx-2000R3 | U4 |
| 1 | R_POT_TRIM | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV1 |
Similar boards
- 2 layers208 × 110 mm

- 2 layers213.1 × 129 mm

- 2 layers

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers160 × 100.3 mm

Z80
dennis9819/Z8C-Homebrew-Computer
To easily develop for my Z80 homebrew system, I designed a simple assempler development environment. This packs the following tasks into one script: zmac assembly object file creation (for xmodem upload) monitor file…
65 parts2 - 2 layers137.2 × 53.3 mm

- 2 layers177.8 × 130.8 mm

Questions
How big is the Estop driver PCB?
It measures 160 × 160 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Estop driver use?
157 parts, built around the K7805-2000R3, 74HC00D, 74HC02 and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Estop driver KiCad files?
From the OUXT-Polaris/estop-driver repository on GitHub, at the commit this page was made from: the board is estop-driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Estop driver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).