

I2S AUDIO DAC
Module for play sound using I2S
- Size
- 42 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 24
- Pads
- 92
- Tracks, vias
- 278, 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Dec 2021
- Updated
- 10 Dec 2021
Overview
I2S AUDIO DAC is an open-source printed circuit board by rick0x00, from the rick0x00/I2S_AUDIO_DAC repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 42 × 49.5 mm with 32 parts on 24 nets, routed with 278 tracks and 16 vias.
It is built around the UDA1334ATS/N2. Its parts include 14 resistors, 12 capacitors, 2 ICs, 2 diodes and 2 connectors. It belongs with the audio and music boards and the ESP32 boards of this library.
Main components
1README
README.mdI2S AUDIO DAC
Module for play sound using I2S

Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10, R11, R12 |
| 5 | 47 uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C3, C5, C7, C9 |
| 4 | 100 nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2, C6, C10, C12 |
| 3 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R13 |
| 2 | 10 nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C4, C8 |
| 2 | 1R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6 |
| 2 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5 |
| 1 | 15R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 330 nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C11 |
| 1 | Conn_01x010_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J1 |
| 1 | L78L33_TO92 | Package_TO_SOT_THT:TO-92_Wide | U1 |
| 1 | PW | LED_THT:LED_D5.0mm | D1 |
| 1 | UDA1334ATS | Package_SO:SSOP-16_4.4x5.2mm_P0.65mm | U2 |
| 1 | VDD | LED_THT:LED_D5.0mm | D2 |
Similar boards
- 2 layers76.2 × 76.2 mm

- 2 layers155 × 60 mm

- 2 layers67 × 54 mm

Mp3alarm
fehlfarbe/ESP32-Alarm-clock
This is an ESP32 based alarm clock that plays mp3 files from SD, webstreams or even FM radio. You can configure multiple alarms and add new songs to your sd card with a simple webinterface.
69 parts1MIT - 4 layers83.1 × 50.9 mm

- 4 layers111.8 × 71.1 mm

- 4 layers98.6 × 92.1 mm

- 2 layers100 × 100 mm

Zxevo1010 top
UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
226 parts26 - 2 layers65 × 30.7 mm

Adafruit adafruit i2s audio bonnet for raspberry pi pcb adafruit i2s audio uda1334 bonnet
oomlout/oomlout_oomp_project_bot_v_2
35 parts
Questions
How big is the I2S AUDIO DAC PCB?
It measures 42 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the I2S AUDIO DAC use?
32 parts, built around the UDA1334ATS/N2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the I2S AUDIO DAC KiCad files?
From the rick0x00/I2S_AUDIO_DAC repository on GitHub, at the commit this page was made from: the board is HARDWARE/EDA/KiCad/I2S_AUDIO_DAC/I2S_AUDIO_DAC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the I2S AUDIO DAC design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).