Skip to the content
2 layers76.2 × 76.2 mmSdram hat, the printed circuit board in 3D

NES implementation in a Lattice Ice40 FPGA

Size
76.2 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
143
Pads
341
Tracks, vias
6,400, 30
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
18 Aug 2017
Updated
26 Aug 2018

Overview

Sdram hat is an open-source printed circuit board by brandonpelfrey, from the brandonpelfrey/ice40-nes repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.2 × 76.2 mm with 35 parts on 143 nets, routed with 6,400 tracks and 30 vias.

It is built around the S25FL128SAGMFBR00, IS42S81600F-6TLI and UDA1334ATS/N2. Its parts include 18 capacitors, 7 resistors and 5 connectors. It belongs with the fPGA and programmable logic boards of this library.

Main components

3

README

README.md

ice40-nes

NES implementation in a Lattice Ice40 FPGA

Parts

35
QtyValueFootprintReferences
8100nFCapacitors_SMD:C_0805_HandSolderingC11, C12, C13, C14, C15, C16, C17, C18
547uF 16VCapacitors_THT:CP_Radial_D5.0mm_P2.50mmC2, C4, C6, C7, C8
4CONN_02X20Socket_Strips:Socket_Strip_Straight_2x20_Pitch2.54mmJ1, J2, J3, J4
3100nF 63VCapacitors_SMD:C_0805_HandSolderingC1, C3, C5
21Resistors_SMD:R_0805_HandSolderingR1, R2
2100Resistors_SMD:R_0805_HandSolderingR5, R6
210nFCapacitors_SMD:C_0805_HandSolderingC9, C10
2220kResistors_SMD:R_0805_HandSolderingR3, R4
10Resistors_SMD:R_0805_HandSolderingR7
1AUDIO_OUT_JACKpcb:SJ1-352XNGJ5
1CONN_02X20Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mmVGA666
1IS42S81600F-6TLIpcb:TSOPII-54_10.16x22.22mm_Pitch0.8mm_ExtendedPadSDRAM1
1LOGOpcb:nes_console_scaledG***
1S25FL128SAGMFBR00pcb:SOIC-16_7.5x9.9mm_Pitch1.27mm_ExtendedPadQPI_FLASH1
1UDA1334ATSpcb:SSOP-16_4.4x5.2mm_Pitch0.65mm_ExtendedPadAUDIO_ENC1

Similar boards

  • 2 layers155 × 60 mmEsplay, the printed circuit board in 3D

    Esplay

    andykarpov/karabas-esplay

    A custom PCB with 3.2" TFT screen for the ESPlay project

    123 parts1
  • 2 layers67 × 54 mmMp3alarm, the printed circuit board in 3D

    Mp3alarm

    fehlfarbe/ESP32-Alarm-clock

    This is an ESP32 based alarm clock that plays mp3 files from SD, webstreams or even FM radio. You can configure multiple alarms and add new songs to your sd card with a simple webinterface.

    69 parts1MIT
  • 2 layers42 × 49.5 mmI2S AUDIO DAC, the printed circuit board in 3D

    I2S AUDIO DAC

    rick0x00/I2S_AUDIO_DAC

    Module for play sound using I2S

    32 parts1Apache-2.0
  • 4 layers83.1 × 50.9 mmPCB Kurs, the printed circuit board in 3D

    PCB Kurs

    fstrs/PCB-Kurs

    Repository for FH Dortmund - Choiceduty-Module 4th Semster

    53 parts
  • 4 layers111.8 × 71.1 mmPCB Kurs Yildirim, the printed circuit board in 3D

    PCB Kurs Yildirim

    ruken-yildirim/PCB-Kurs-Yildirim

    51 partsCC0-1.0
  • 4 layers98.6 × 92.1 mmVideo+Sound, the printed circuit board in 3D

    Video+Sound

    aslak3/MAXI030

    MC68030 based expandable computer design

    102 parts38GPL-2.0
  • 2 layers100 × 100 mmZxevo1010 top, the printed circuit board in 3D

    Zxevo1010 top

    UzixLS/zxevo1010-board

    10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure

    226 parts26

Questions

How big is the Sdram hat PCB?

It measures 76.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sdram hat use?

35 parts, built around the S25FL128SAGMFBR00, IS42S81600F-6TLI and UDA1334ATS/N2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sdram hat KiCad files?

From the brandonpelfrey/ice40-nes repository on GitHub, at the commit this page was made from: the board is pcb/sdram_hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sdram hat design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).