KiCad boards from 58 GitHub repositories tagged “schematic”, the most starred first; open any of them in PCBKit.
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
potatobeanradio/circuitRF
Full featured RF circuit + electromagnetic simulator. DC, S-parameters, harmonic balance, loadpull, envelope. Also supports 2D and 3D layout and design and electromagnetic MoM, FEM, FDTD + thermal FEM.
sszczep/Cherry-MX-Breakout-Board
Cherry MX Breakout Boards with reverse-mounted addressable RGB LED and hot-swap.
ZiroEDA/ziro-designer
KiCad 10 in the browser: open, edit and share real schematic and PCB projects with nothing to install. GPL-3.0, end-to-end encrypted cloud projects.
buildwithtrace/trace-public
Official source code of Trace, an AI-native PCB design tool.
martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board
oaslananka/kicad-studio-kit
VS Code extension for KiCad EDA workflows with schematic/PCB viewers, DRC/ERC, BOM and export tooling, plus MCP discovery, configuration, compatibility metadata, and AI-assisted developer workflows.
NelsonBittencourt/PicArd
An Ultra Low Cost PIC programmer with Arduino Uno/Nano (hardware + software)
sini6a/stm32-pocket-console
STM32 Pocket Game/Dev Console 🕹️ is a handheld device powered by 2xAAA batteries. It features 5 programmable buttons, 2 LEDs, and an SPI TFT 2.4" display with a resolution of 320x240 pixels.
dunkelstern/electret_preamp
Electret Microphone Preamp based on Texas Instruments Single-Supply, Electret Microphone Pre-Amplifier Reference Design by John Caldwell
IsmaelLopesSilva/Eletronica
Sobre eletrônica (artigos, ebooks, simuladores e outros conteúdos).
AFLProjects/DIY-Smart-Watch
DIY Smart Watch with ATMEGA32U4 , ST7789 SPI display and RV3028-C7 Extreme Low Power RTC Module
NijoP/pcbflow
PCB Flow — autonomous, AI-assisted PCB design workflow that takes a hardware project from requirements to manufacturing-ready files.
aresta/Rasp_latch_button
Mini HAT with a Push Button to Power the Raspberry Pi On and Off Safely, After the Shutdown Sequence Completes
dshills/KiCadAI
AI-assisted KiCad design toolkit with Go CLI, direct schematic/PCB writers, validation, and pinmap checks.
ildus/pangaea_cp16
Guitar cabinet simulator (on impulse responses) based on AMT Pangaea CP-16
jimmydin7/keydeck
Keydeck is a hardware project, a custom designed macropad with a fully built from scratch PCB, schematic, routing, and 3D model + printed case.
pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device
bluerobotics/fathom-x
Ethernet capable tether interface board for the Fathom tether.
mhardeman/matt-poe-prototype
PoE Powered Device (PD) Prototype Schematic & PCB design in KiCad for 12V & 5V output rails
