
Protoboard power
IsmaelLopesSilva/Eletronica
Sobre eletrônica (artigos, ebooks, simuladores e outros conteúdos).

Sobre eletrônica (artigos, ebooks, simuladores e outros conteúdos).
Green Pill is an open-source printed circuit board by IsmaelLopesSilva, from the IsmaelLopesSilva/Eletronica repository on GitHub. It is a 2-layer board of 51.2 × 70.4 mm with 29 parts on 50 nets, routed with 654 tracks and 77 vias.
It is built around the 68000-220HLF, 10103594-0001LF and M20-9980345. Its parts include 9 resistors, 8 capacitors, 5 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 20pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5, C6, C8, C9 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C7, C10 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6 |
| 2 | 20R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 510R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 2 | 68000-220HLF | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2, J5 |
| 1 | 0022232041 | digikey-footprints:PinHeader_1x4_P2.54mm_Drill1.02mm | J3 |
| 1 | 10103594-0001LF | digikey-footprints:USB_Micro_B_Female_10118194-0001LF | J1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 1MEGA | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 20uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 32.768kHz | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Vertical | Y2 |
| 1 | 8MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | LED_PC13 | LED_THT:LED_D3.0mm | D1 |
| 1 | LED_PWR | LED_THT:LED_D3.0mm | D2 |
| 1 | M20-9980345 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | B3F-1000 |

IsmaelLopesSilva/Eletronica
Sobre eletrônica (artigos, ebooks, simuladores e outros conteúdos).

sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

ded811/Mega-Uno-2560
An Arduino-compatible ATmega2560 development board in the Arduino Uno form factor


kaustubh850/ArduinoEquipped
A Repo wit Arduino Uno Compatible Boards with on-board Addons.



chadaustin/wired-sculpt-pcb
KiCad design files for the Wired Sculpt conversion mod

BerkeleyLab/Marble-Mini
"Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE
It measures 51.2 × 70.4 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the 68000-220HLF, 10103594-0001LF and M20-9980345. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IsmaelLopesSilva/Eletronica repository on GitHub, at the commit this page was made from: the board is KiCad/Green Pill/Green Pill.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IsmaelLopesSilva before reusing the design.