
CCFL2LED
mijuc/CCFL2LED
Hi! I'm working on the R&D side of the Поново project. Through our initiative, where we upcycle old electronic devices in exchange for tree seedlings, we’ve noticed that LCD monitors are among the most common items…

A simple light for indoor plants
SottovasoLuminoso is an open-source printed circuit board by paoloach, from the paoloach/LuminousSaucer repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 77 × 41 mm with 20 parts on 41 nets, routed with 140 tracks and 16 vias.
It is built around the ESP32-WROOM-32, PT4115 and LM1117-3.3, with the SS34 among its other parts. Its parts include 4 capacitors, 4 resistors, 3 ICs, 3 connectors and 2 switches. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
The indoor light is very minor to the sun, especially in the summer.
The aim of this project is to allow those plants needing to receive a grea quantity of light to be illuminated properly.
It consists in a saucer containing the all the ESP32 and the electronic but the lights and on the top the lights. The idea is to put a vase on the saucer and allow the plant to receive all the light it needs.
The light can be controlled by homeassistant or by the android application included in the project. You can set the light period and the maximum light.
The project contains a 3d STL file for allow you to print the saucer and the light holder, a schematic and a gaber file for printing the electronic PCB, the configuration file for programming the ESP32 by esphome and the source of the android application
something like

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 1 | 100uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 100uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 68uh | custom:RH127 | L1 |
| 1 | Boot | custom:ButtonSMD | SW2 |
| 1 | DEBUG | custom:XH4-V | J3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | LEDs | custom:XH2-H | J1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | PT4115 | Package_TO_SOT_SMD:SOT-89-5_Handsoldering | U3 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Reset | custom:ButtonSMD | SW1 |
| 1 | SS34 | custom:SS34 | D1 |
The 18 most common of 20 parts.

mijuc/CCFL2LED
Hi! I'm working on the R&D side of the Поново project. Through our initiative, where we upcycle old electronic devices in exchange for tree seedlings, we’ve noticed that LCD monitors are among the most common items…


tunaerray/3w-rgb-led-driver
3W RGB LED driver board with PWM dimming for AUV image processing


FaisalHussain95/esp32-espnow-led-spots
DIY 220VAC LED spot controller — ESP32-C3 + COB LED + PT4115 PWM dimming, NTC thermal protection, active fan cooling, ESP-NOW mesh. WiFi bridge for Home Assistant (MQTT).


martinclausen2/RGBW-Lampe
The "RGBW-Lampe" projects allows to create full color lighting appliances.

It measures 77 × 41 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the ESP32-WROOM-32, PT4115, LM1117-3.3 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the paoloach/LuminousSaucer repository on GitHub, at the commit this page was made from: the board is schematic/SottovasoLuminoso/SottovasoLuminoso.kicad_pcb and its schematic schematic/SottovasoLuminoso/SottovasoLuminoso.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).