Home automation

95 boards

KiCad boards from 60 GitHub repositories tagged “home-automation”, the most starred first; open any of them in PCBKit.

2 layers34 × 109.9 mm
Tdisplay s3
landonr/homeThing
Wifi Smart Home Remotes that run on ESPHome
14 parts551GPL-3.0
4 layers50 × 87 mm
EnergyMe Home
jibrilsharafi/EnergyMe-Home
Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)
87 parts288GPL-3.0
4 layers37.1 × 37.2 mm
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0
2 layers63 × 58 mm
OPNpool r5
cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.
17 parts102
4 layers100 × 94 mm
Picohome2
racerxdl/picohome
Raspberry Pi Pico Home Automation using CAN Bus
123 parts90Apache-2.0
2 layers25.4 × 45.7 mm
Rf bridge
buserror/rf_bridge
RF (433Mhz) to MQTT Bridge - with hardware
16 parts39
2 layers47.2 × 55.5 mm
Tinta l2
c0de111/tinta
Battery-powered e-paper sign: room signage, sensor graphs, home automation, or anything over Wi-Fi. Wakes by real-time clock, NFC tap, or button. Raspberry Pi Pico W firmware, custom PCB, and 3D-printed case included.
60 parts39Apache-2.0
2 layers62.2 × 57.1 mm
Ws2mqtt
Tho85/ws2mqtt
Connect WiSafe2 devices to Home Assistant
8 parts28BSD-3-Clause
2 layers45.7 × 40.6 mm
MiniDIO
adlerweb/asysbus
Arduino System Bus
23 parts27GPL-3.0
2 layers242 × 60 mm
Roothubs
gkiefer/home2l
The Home2Ls - Smart Tools for a Private Home
178 parts21
2 layers74 × 34 mm
EMS Bus Gateway
mariusgreuel/EMS-Bus-Gateway
EMS Bus Gateway for Buderus Boilers to run EMS-ESP32
48 parts21GPL-3.0
2 layers199.4 × 50.8 mm
Nixie board
vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.
85 parts17GPL-3.0
2 layers32 × 29 mm
BeeLight
Kampi/BeeLight
Zigbee environment sensor device with Zigbee2MQTT support.
25 parts16GPL-3.0
2 layers65 × 56.5 mm
Pool pi v1.1
ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.
28 parts14
2 layers49.5 × 40.5 mm
Hcv
chrkir/hcv
Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.
32 parts9
2 layers75 × 55 mm
Wellfed bench
Isaac-Duarte/wellfed
Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.
93 parts8MIT
2 layers85 × 155 mm
Esp32-fan controller
merlindorin/esp32-fan-controller
A small KiCad board to keep my home server cabinet cool. 4 PWM fans, 4 temperature probes, one ESP32.
38 parts8MIT
2 layers49.5 × 45 mm
Hb rc-2-pbu led
jp112sdl/HB-RC-2-PBU-LED
2 fach Wandtaster mit RGB LED Beleuchtung
33 parts7
2 layers30.7 × 34.3 mm
ModbusRtuSensorHub
MichielVanwelsenaere/HomeAutomation.ModbusRtuSensorHub
PCB with small footprint designed to act as a Modbus RTU slave.
23 parts7MIT
2 layers40.4 × 33.8 mm
Esp32-s2
hggh/window-handle-sensor
window handle contact sensor
31 parts6GPL-3.0
2 layers80.5 × 91.4 mm
GarageOpener
xhivo97/esp-garage-hardware
ESP32-C3 Garage Opener PCB
47 parts6Apache-2.0
2 layers100 × 70 mm
UPSMonitorStandalone rev01
enriquewph/esp-map
Modular hardware for IoT & home automation
110 parts4MIT
2 layers55.6 × 43.2 mm
BallValveController
hansrune/BallValveController
Ball valve controller for irrigation, water automations and leak prevention. Supports CR05 feedback wiring. Based on ESP32c3. ESPEasy and ESPHome based firmware build instructions included
46 parts4
2 layers34.3 × 40.9 mm
HeatPumpControl
hansrune/HeatPumpControl
ESP32c3 board with IR blaster and serial ports for heat pump control over local WiFi with ESPHome or ESPEasy firmwares
34 parts3