2 layers53 × 65 mm
Dds sweeper board
QTC-UMD/dds-sweeper
Raspberry Pi Pico interface for the AD9959 DDS
17 parts11BSD-2-Clause
Interfaces and adapters
7,328 boards- 2 layers92 × 62.5 mm
- 2 layers100 × 55 mm
- 2 layers99.7 × 49.5 mm
- 4 layers121.9 × 115.8 mm
SparkFun GNSS UM980 panelized
sparkfun/SparkFun_UM980_Triband_GNSS_RTK_Breakout
Documentation and hardware repository for the SparkFun Triband GNSS RTK Breakout, featuring the UM980 high precision GNSS/RTK module from Unicore Communications
584 parts11 - 2 layers208.2 × 49.3 mm
- 2 layers11 × 12 mm
- 2 layers33.7 × 20.3 mm
UINIO USB UART CH343
uinika/UINIO-USB-UART-CH343
the USB-to-UART tool base on CP2102 & CH343P.
25 parts11 - 2 layers30 × 30.2 mm
Paw3395 breakout board
vnguyen31/PixArt-PAW3395-Breakout-Board
Fully functioning Breakout Board with SPI pin headers for PAW3395 Motion Sensor
28 parts11MIT - 2 layers65 × 56.5 mm
Tentacle raspi
whitebox-labs/tentacle-raspi-oshw
Tentacle T3 - an add-on board for Raspberry Pi to interface with Atlas Scientific sensor circuits.
38 parts11 - 2 layers100 × 65 mm
- 2 layers49.8 × 49.8 mm
IsoUSBRS422
alperyazar/isoUSBRS422
isoUSBRS422 is an isolated USB - RS422/RS485 converter. It is designed using KiCad. Repository includes KiCad project and necessary firmware files.
69 parts10 - 4 layers47 × 33 mm
Rpi cm4-csi adapter
antmicro/raspberry-pi-cm4-csi-adapter
This repository contains open hardware design files for an adapter board allowing to connect video accessories developed by Antmicro to a Raspberry Pi CM4 IO Board over a 22-pin FFC connector.
19 parts10Apache-2.0 - 2 layers67.3 × 25.4 mm
UPDI programmer
dbuchwald/kicad-simple
Simple designs in KiCAD that do not require separate projects
32 parts10MIT - 2 layers88.9 × 71.8 mm
Adapter
doitaljosh/gea-interface-board
KiCAD board files for making an interface board that converts the RJ45 diagnostic port on most newer GE appliances to usable UART. Note: these are untested designs.
44 parts10 - 2 layers14.3 × 24.3 mm
ICM-42670-P Breakout Board
EbenenBonobo/ICM-42670-P-Breakout-Board
Breakout Board Design for the ICM-42670-P but should work with similar ICM 42... Sensors. Designed by me, improved by Reddit
9 parts10GPL-3.0 - 4 layers29 × 54.4 mm
ESP32-S3-Breakout
eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module
34 parts10MIT - 2 layers
Caduceus
Embedded-Systems-Discord/1-Caduceus
A maker-friendly board with single pair ethernet both for power and for data, that will work with Arduino
89 parts10GPL-3.0 - 4 layers34.8 × 28 mm
Gt9113 breakout
EvanKrall/ipad_touchscreen_driver_gt9113
A PCB designed to interface with the iPad (A1219) touchscreen
10 parts10 - 4 layers93.7 × 26.8 mm
Minipcie nvme adapter
EvanKrall/minipcie_nvme_adapter
mini PCIe to NVMe (PCIe M.2 key M) adapter for the HP T620 thin client
13 parts10 - 2 layers46.4 × 46.4 mm
2ch-4-20mA
Fescron/2ch-4-20mA-converter
1/2 channel 4-20 mA to voltage converter boards using LMP8640 current sense monitor.
30 parts10 - 2 layers36 × 32 mm
- 2 layers79 × 106 mm
Save a Term
inmbolmie/Save-a-Term
Hardware for a PS/2 to 5251 and 3278 reverse keyboard adapter based on a TMK controller fork
28 parts10GPL-3.0 - 2 layers62.2 × 17.7 mm
DaemonBite MD2
jeffqchen/Genesis-2X-Controller-to-USB-Adapter
Genesis 2X Controller to USB Adapter, powered by DaemonBite
5 parts10CC-BY-SA-4.0