

Ethernet
GPSDO PTP Master
- Size
- 92 × 62.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 90
- Pads
- 465
- Tracks, vias
- 437, 144
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Jul 2021
- Updated
- 10 Jun 2024
Overview
Ethernet is an open-source printed circuit board by rjrouquette, from the rjrouquette/gpsdo repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 92 × 62.5 mm with 111 parts on 90 nets, routed with 437 tracks and 144 vias.
It is built around the MSP432E401YTPD, MAX-8Q and TLV75733PDRV, with the BSC340N08NS3 G, MMBT5401L and NX3225GA-25.000M-STD-CRG-2 among its other parts. Its parts include 35 capacitors, 34 resistors, 13 transistors, 9 diodes and 9 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
7MSP432E401YTPD
TQFP-128(14x14)-40℃~+105℃ 1.14V~3.63V 120MHz 12bit 1MB 256KB 32 Bit 6KB 90 ARM Cortex-M4F Built-in FLASH TQFP-128(14x14) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)MAX-8Q
Uncategorisedu-bloxTLV75733PDRV
WSON-6(2x2)-40℃~+125℃@(Tj) 1 1A 25uA 3.3V 425mV@(1A) 45dB@(100kHz) 5.5V 71.5uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive WSON-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSC340N08NS3 G
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 204pF 23A 3.5V 32W 34mΩ@10V 756pF 80V 9.1nC@10V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsMMBT5401L
SOT-23-55℃~+150℃ 1 PNP 150V 200mV 300MHz 300mW 500mA 50nA 5V 60 PNP SOT-23 Bipolar (BJT) ROHSonsemiBipolar (BJT)NX3225GA-25.000M-STD-CRG-2
SMD3225-4P-40℃~+85℃ 25MHz 50Ω 8pF ±20ppm ±30ppm SMD3225-4P Crystals ROHSNDKCrystalsRB068L100TE25
SMA(DO-214AC)1 Independent 100V 110A 2A 50uA@100V 790mV@2A SMA(DO-214AC) Schottky Diodes ROHSROHM SemiconductorSchottky Diodes
README
kicad/README.mdKiCad Projects
This directory contains the KiCad project files for the GPSDO and Ethernet boards.
Ethernet
The IEEE 1588 PTP ethernet board.
Main Files:
ethernet.proethernet.schethernet.kicad_pcb
GPSDO
The GPSDO daughter board.
Main Files:
gpsdo.progpsdo.schgpsdo.kicad_pcb
Errata
- 549CAAC000111BBG (25MHz) replaced with 544CAAC000112BBG (10MHz)
- Lack of inventory for Si549
- Si544 is reprogrammed by MSP430 to 25MHz on boot
544CAAC000112BBG
| Product | Si544 |
|---|---|
| Description | Differential/single-ended; Any frequency (I2C) XO; 0.2-1500 MHz |
| Frequency A | 10 MHz |
| I2C Address (Hex Format) | 0x55 |
| Output Format and Supply Voltage | CMOS: 1.8 V, 2.5 V, 3.3 V |
| Temperature Stability / Total Stability | 20 ppm / 50 ppm |
| OE Pin Location and Polarity | OE Pin1, Active High |
| Frequency Range | 0.2 - 325 MHz (CMOS available to 250 MHz) |
| Package Option | 3.2x5 mm |
| Operating Temp Range (°C) | -40 to +85 |
549CAAC000111BBG
| Product | Si549 |
|---|---|
| Description | Differential/single-ended; Any frequency (I2C) XO; 0.2-1500 MHz |
| Frequency A | 25 MHz |
| I2C Address (Hex Format) | 0x55 |
| Output Format and Supply Voltage | CMOS: 1.8 V, 2.5 V, 3.3 V |
| Temperature Stability / Total Stability | 20 ppm / 50 ppm |
| OE Pin Location and Polarity | OE Pin1, Active High |
| Frequency Range | 0.2 - 325 MHz (CMOS available to 250 MHz) |
| Package Option | 3.2x5 mm |
| Operating Temp Range (°C) | -40 to +85 |
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100n | Capacitor_SMD:C_0805_2012Metric | C4, C5, C10, C11, C12, C15, C16, C19, C23, C24, C25, C28, C31, C33, C34, C35 +4 |
| 9 | 330 | Resistor_SMD:R_0805_2012Metric | R13, R14, R19, R23, R24, R25, R26, R27, R31 |
| 8 | 3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q5, Q7, Q9, Q10, Q11, Q13 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C20, C21, C22, C26, C32 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R11, R21, R32, R33 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R6, R15, R29, R30 |
| 4 | 49.9 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 3 | 3906 | Package_TO_SOT_SMD:SOT-23 | Q6, Q8, Q12 |
| 3 | 3k | Resistor_SMD:R_0805_2012Metric | R7, R12, R34 |
| 3 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-2120_EdgeMount_Horizontal | J2, J5, J6 |
| 3 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D2, D4, D6 |
| 3 | LED | LED_THT:LED_D5.0mm_Horizontal_O3.81mm_Z3.0mm | D1, D3, D5 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C14, C18 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric | C29, C30 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 150k | Resistor_SMD:R_0805_2012Metric | R22, R28 |
| 2 | 74AUC2G34 | Package_TO_SOT_SMD:SOT-23-6 | U4, U5 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 110k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 2.5k | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 2.7u | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 27n | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 4.7n | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 4.87k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 4N25 | Package_DIP:SMDIP-6_W9.53mm | U7 |
| 1 | 750m | Resistor_SMD:R_1206_3216Metric | R18 |
| 1 | BATT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BSC340N08NS3G | Package_TO_SOT_SMD:TDSON-8-1 | Q3 |
| 1 | BZX84C12VLY | Diode_SMD:D_SOT-23_ANK | D8 |
| 1 | HSMW-C170 | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | KSC701 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | LM4040DBZ-2.5 | Package_TO_SOT_SMD:SOT-23 | U6 |
| 1 | MAX-8Q | RF_GPS:ublox_MAX | U2 |
| 1 | MMBT5401L | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | MSP432E401Y | Package_QFP:LQFP-128_14x14mm_P0.4mm | U1 |
| 1 | NX3225GA-25.000M-STD-CRG-2 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | POE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | POE+ | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J8 |
| 1 | POE- | Connector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork | J9 |
| 1 | RB068L100TE25 | Diode_SMD:D_SMA | D9 |
| 1 | RJ45_Abracon_ARJP11A-MASA-B-A-EMU2 | Connector_RJ:RJ45_Abracon_ARJP11A-MA_Horizontal | J1 |
| 1 | TLV75733PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | Wuerth_750315371 | Transformer_SMD:Transformer_Wuerth_750315371 | TR1 |
More from rjrouquette/gpsdo
1- 2 layers21 × 12 mm

Similar boards
- 4 layers144.3 × 143.8 mm

- 4 layers150.3 × 132.3 mm

- 2 layers50 × 70 mm

ControlUnit
GJN-Aerospace/Halcyon
GitHub repository for actively stabilized model rocket project.
79 parts - 4 layers111.9 × 100 mm

Driver Board
ishaansalian/Embedded-Hardware-Assessment
This repository contains the KiCad design files created for an embedded hardware design assessment.
46 parts - 4 layers184.3 × 25.4 mm

Standalone Avionics Board
MSTRocketDesignTeam/Avionics-Standalone-PCB
Standalone Avionics Board
136 partsGPL-3.0 - 2 layers146.6 × 112.5 mm

Body Control Module
Mustafa614/Body-Control-Module-Mini
This Module are controlling wipers,baclights,door statues and comminicates with another ecu's via can bus
74 parts - 4 layers73 × 50 mm

Tardigrade
nortismo/tardigrade
Open Hardware board with an embedded LPC55 MCU and a SX1262 LoRa transceiver
127 parts - 6 layers124.5 × 55.9 mm

Eos tm4c1294-board
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
131 parts8MIT
Questions
How big is the Ethernet PCB?
It measures 92 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ethernet use?
111 parts, built around the MSP432E401YTPD, MAX-8Q, TLV75733PDRV and BSC340N08NS3 G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet KiCad files?
From the rjrouquette/gpsdo repository on GitHub, at the commit this page was made from: the board is kicad/ethernet.kicad_pcb and its schematic kicad/ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).