
Standalone Avionics Board
MSTRocketDesignTeam/Avionics-Standalone-PCB
Standalone Avionics Board

GitHub repository for actively stabilized model rocket project.
ControlUnit is an open-source printed circuit board by GJN-Aerospace, from the GJN-Aerospace/Halcyon repository on GitHub. It is a 2-layer board of 50 × 70 mm with 79 parts on 82 nets, routed with 564 tracks and 61 vias.
It is built around the W25Q32JVSSIQ, BME280 and MAX-8Q. Its parts include 22 capacitors, 14 resistors, 13 connectors, 9 diodes and 6 ICs. It belongs with the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C6, C8, C11, C12, C13, C14, C16, C19 |
| 4 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C15, C17, C18, C20 |
| 4 | LED | LED_SMD:LED_1206_3216Metric | D3, D4, D5, D6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 4 | R | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric | R4, R5, R6 |
| 3 | D_Schottky | CustomLib:DIOM5436X244N | D7, D8, D9 |
| 2 | 12pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7, C9 |
| 2 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J4, J5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C21 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 32.768kHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | ATSAMD21G18A-AFT | Package_QFP:TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | BME280 | CustomLib:BME280 | J8 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02 | CustomLib:SMD_PinHeader_01x02_2.54mm | J13 |
| 1 | Conn_01x05 | CustomLib:ProgPins_01x05_2.54mm | J3 |
| 1 | DIODE | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | LED_RCGB | LED_THT:LED_D5.0mm-4_RGB | D2 |
| 1 | LM340_SOT223/LM7805_5V | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LOGO | CustomLib:gjna2 | G*** |
| 1 | LOGO | CustomLib:gjnb | G*** |
| 1 | LOGO | CustomLib:Untitled | G*** |
| 1 | MAX-8Q | RF_GPS:ublox_MAX | U5 |
| 1 | MCP1826S_3.3V | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MPU-6050/MPU-9250 | Switch:MPU-9250-4pin | J11 |
| 1 | Micro_SD_Card | CustomLib:microSD_HC_Molex_502774-0891 | J6 |
| 1 | RFM69W | RF_Module:HOPERF_RFM69HW | U4 |
| 1 | S1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | S2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | S3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | S4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | SW_DPDT_x2 | Switch:Sw1 | SW1 |
| 1 | SW_Push | CustomLib:Push_Switch_TS1107GS-5 | SW2 |
| 1 | Screw_Terminal_01x02, Batt 9V | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Tensility_54-00023_Vertical_CircularHoles | J2 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U6 |
The 78 most common of 79 parts.

MSTRocketDesignTeam/Avionics-Standalone-PCB
Standalone Avionics Board


nortismo/tardigrade
Open Hardware board with an embedded LPC55 MCU and a SX1262 LoRa transceiver

KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.


Ankithkumarsingh/ESP32-custom-sensor-board
This PCB contains the power supply unit, ESP32 module as compute, microphone sensor, light sensing sensor, SDCard module for data logging.

aryan-asit/Telemetry-iot-project
In this project , a 4 layer custom pcb is made for Telematics

ddennis18/ESP32-IoT-DevBoard
An ESP32-C3 based IoT controller board designed in KiCad. The board combines wireless control, sensor interfaces, local storage, audio/light sensing, USB connectivity, and single-cell Li-ion battery support on a compact…
It measures 50 × 70 mm and has 2 copper layers, 1.6 mm thick.
79 parts, built around the W25Q32JVSSIQ, BME280 and MAX-8Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GJN-Aerospace/Halcyon repository on GitHub, at the commit this page was made from: the board is Hardware/Electronics/ControlUnit/ControlUnit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GJN-Aerospace before reusing the design.