

Gt9113 breakout
A PCB designed to interface with the iPad (A1219) touchscreen
- Size
- 34.8 × 28 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 10
- Nets
- 87
- Pads
- 211
- Tracks, vias
- 819, 119
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Feb 2021
- Updated
- 25 Feb 2021
Overview
Gt9113 breakout is an open-source printed circuit board by EvanKrall, from the EvanKrall/ipad_touchscreen_driver_gt9113 repository on GitHub. It is a 4-layer board of 34.8 × 28 mm with 10 parts on 87 nets, routed with 819 tracks and 119 vias.
Its parts include 3 capacitors, 3 resistors, 3 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
README
README.mdipad_touchscreen_driver_gt9113
This is part of my larger project to put a single-board computer inside the original iPad.
This circuit uses the GT9113 touchscreen controller from Goodix, which seems to be the only capacitive touchscreen controller I can find that:
- is available in small quantities (via Chinese retailers like AliExpress)
- has enough TX and RX lines to drive the iPad's screen
- uses a footprint that isn't super-fine-pitch BGA, which would require a PCB manufacturer that can do 3/3 traces and 0.15mm drills.)
The last requirement rules out the chip I used in my first attempt at this board.
See the rendered images and gerbers on the releases page
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3 |
| 2 | 0R/DNF | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 504740-5100 | footprints:504740-5100 | J7, J8 |
| 1 | 300k/DNF | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | GT9113 | footprints:GT9113 | U1 |
Similar boards
- 4 layers22 × 42 mm

- 4 layers28 × 70 mm

DSC DB9 Splitter
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
10 parts371 - 4 layers59 × 23 mm

- 4 layers47.9 × 47.9 mm

FlashCardBanked2M
clydeshaffer/gametank
design files for the gametank hardware implementation
10 parts150 - 4 layers32 × 50 mm

J533DreamPCB
lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!
10 parts95MIT - 4 layers118.1 × 68.6 mm

Nucleo-144-click shield
COVESA/Open1722
Open-source implementation of the IEEE 1722 protocol, for streaming audio/video, tunneling CAN/LIN messages and enabling remote access to peripherals
10 parts86BSD-3-Clause - 4 layers72 × 40.2 mm

Thelio io sata
system76/thelio-io-hardware
KiCad electrical design of Thelio Io board
10 parts70GPL-3.0 - 4 layers60.9 × 34.2 mm

Questions
How big is the Gt9113 breakout PCB?
It measures 34.8 × 28 mm and has 4 copper layers, 1 mm thick.
What parts does the Gt9113 breakout use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gt9113 breakout KiCad files?
From the EvanKrall/ipad_touchscreen_driver_gt9113 repository on GitHub, at the commit this page was made from: the board is gt9113_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gt9113 breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask EvanKrall before reusing the design.