

DaemonBite MD2
Genesis 2X Controller to USB Adapter, powered by DaemonBite
- Size
- 62.2 × 17.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 16
- Pads
- 46
- Tracks, vias
- 146, 10
- Pours
- 46
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Oct 2021
- Updated
- 9 Aug 2022
Overview
DaemonBite MD2 is an open-source printed circuit board by jeffqchen, from the jeffqchen/Genesis-2X-Controller-to-USB-Adapter repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 62.2 × 17.7 mm with 5 parts on 16 nets, routed with 146 tracks and 10 vias.
Its parts include 2 connectors and 1 IC. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdGenesis 2X Controller to USB Adapter
This is my take on the Genesis 2X Controller to USB Adapter, powered by DaemonBite.






Parts
-
DB9 Ports (Choose the DR9, Male option) - Link
-
Arduino Pro Micro 5V/16MHz Version - Link
-
[2x] 2.54mm Pitch Pin Header, Square Pins, Single Row - 12 pins on each side - Link
-
[2x] M2x20mm Hex Screw & Nut - Link
-
3D Printed Shell
3D Printing
Print the two halves of the shell in their original orientation.
Suggested settings:
- 0.16 layer height
- 0.35 line width
- With support
Assembly
Trim all the extra stubs from the PCB.
Loosen the screws on both sides of the DB9 ports, but don't remove them yet.
Solder in the DB9 ports first. Then the Pro Micro on the other side with the pin headers. Trim the protruding pin header pins on the other side of the PCB. Otherwise you won't be able to fit the assembly into the shell.
Remove the screws and the face plate from the DB9 port. Otherwise you won't be able to fit the assembly into the shell.
Finally, slide the assembly into the printed shell, and screw it shut with two sets of M2x20mm hex screws and nuts.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | DR9 | DaemonBite_MD2:DR9_Male_PCB | P1, P2 |
| 1 | LOGO | DaemonBite_MD2:PCB_Outline | G*** |
| 1 | LOGO | DaemonBite_MD2:RD_logo | G*** |
| 1 | Pro_Micro | DaemonBite_MD2:Pro_Micro | U1 |
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the DaemonBite MD2 PCB?
It measures 62.2 × 17.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DaemonBite MD2 use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DaemonBite MD2 KiCad files?
From the jeffqchen/Genesis-2X-Controller-to-USB-Adapter repository on GitHub, at the commit this page was made from: the board is KiCAD/DaemonBite_MD2/DaemonBite_MD2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DaemonBite MD2 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
