Skip to the content
2 layers208.2 × 49.3 mmHost adapter, the printed circuit board in 3D

PCIe to .1 inch header breakout

Size
208.2 × 49.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
164
Pads
328
Tracks, vias
1,840, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Sep 2020
Updated
14 Sep 2020

Overview

Host adapter is an open-source printed circuit board by TobleMiner, from the TobleMiner/PCIe-breakout repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 208.2 × 49.3 mm with 7 parts on 164 nets, routed with 1,840 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

Parts

7
QtyValueFootprintReferences
4Conn_01x40_MaleConnector_PinHeader_EdgeLaunch_2.54mm:Connector_PinHeader_EdgeLaunch_2,54mm_01x40J1, J2, J5, J6
2Conn_01x02_MaleConnector_PinHeader_EdgeLaunch_2.54mm:Connector_PinHeader_EdgeLaunch_2,54mm_01x02J3, J7
1Connector_PCIe_x16Connector_PCBEdge:BUS_PCIexpress_x16J4

More from TobleMiner/PCIe-breakout

1
  • 2 layers208.2 × 40.9 mmPCIe pin header adapter, the printed circuit board in 3D

    PCIe pin header adapter

    TobleMiner/PCIe-breakout

    PCIe to .1 inch header breakout

    7 parts11GPL-3.0

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Host adapter PCB?

It measures 208.2 × 49.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Host adapter use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Host adapter KiCad files?

From the TobleMiner/PCIe-breakout repository on GitHub, at the commit this page was made from: the board is host_adapter/host_adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Host adapter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).