4 layers79.2 × 26.3 mm
HPE FlexibleLOM adapter x4
TobleMiner/HPE-FlexibleLOM-adapter
Adapter for using HPE FlexibleLOM cards in full height PCIe slots
9 parts246GPL-3.0
Boards by TobleMiner
28 boardsOpen-source boards designed in KiCad by TobleMiner on GitHub, from 25 repositories. A board’s address here is its repository’s there.
- 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 2 layers25.3 × 48.2 mm
ESP32-Devkit Type C
TobleMiner/ESP32-Devkit-Type-C
Breadboard friendly, USB Type C enabled, ESP32 Devkit compatible, JLCPCB assembly ready ESP32 devboard
57 parts92MIT - 4 layers88 × 30 mm
- 4 layers83 × 83 mm
Blinkekatze
TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays
134 parts34 - 4 layers70 × 91.8 mm
Mini pcie m.2-key m adapter
TobleMiner/M.2-NVMe-SSD-to-miniPCIe-adapter
A simple M.2 NVMe to miniPCIe adapter
44 parts34MIT - 4 layers95 × 41.6 mm
- 2 layers70.5 × 32 mm
PinebookPro M2-A+E adapter
TobleMiner/PBP-NGFF-A-E-adapter
A/E Key NGFF adapter for the Pinebook Pro. Designed as drop-in replacement for the NVMe adapter.
34 parts16MIT - 4 layers82.5 × 65.5 mm
- 2 layers208.2 × 49.3 mm
- 4 layers33 × 71.5 mm
- 4 layers84 × 28.8 mm
- 4 layers89 × 85 mm
- 4 layers26 × 10 mm
- 4 layers50 × 18 mm
- 2 layers16 × 8.5 mm
Buckboost
TobleMiner/LiIon-buck-boost-3V3
Simple full voltage range single cell LiIon to 3.3 V buck-boost converter
8 parts4MIT - 2 layers58.9 × 25.6 mm
- 2 layers49 × 25 mm
Rigol psu usb type c adapter
TobleMiner/rigol-DP832-USB-C-adapter
A USB-C power adapter for the Rigol DP832
12 parts3MIT - 4 layers84 × 81 mm
Blinkekatze charger
TobleMiner/blinkekatze-charger
A USB-C powered 20 port 5V 1.5A USB-C charger
416 parts2 - 4 layers21.5 × 13.2 mm
- 4 layers20.4 × 50.9 mm
RedPill
TobleMiner/STM32-RedPill
The RedPill, for when you realize the BluePill just doesn't cut it
48 parts2MIT - 2 layers44.3 × 46.3 mm
Catear pcb
TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
121 parts1 - 4 layers20.5 × 23 mm
Ublox breakout
TobleMiner/ublox-M8030-KT-breakout
Breakout for the bare UBX-M8030-KT chip. Supports pin compatible chips from M6, M7 and M8 generations. JLCSMT assembly supported
32 parts1 - 4 layers40 × 40.8 mm
Rgb led panel
TobleMiner/16x16-RGB-led-panel
This board is a carrier for small 1x1mm RGB LEDs. It connects pin 1 of each LED column and the remaining pins of each row together, exposing them via BGA-style contact pads at the bottom side of the PCB.
342 partsMIT