
Ohren
TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.

This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
Catear pcb is an open-source printed circuit board by TobleMiner, from the TobleMiner/catear-pcb repository on GitHub. It is a 2-layer board of 44.3 × 46.3 mm with 121 parts on 111 nets, routed with 933 tracks and 461 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-WROOM-32 and TPS63070RNM, with the BH1750FVI-TR, BME680 and BNO055 among its other parts. Its parts include 47 capacitors, 38 resistors, 10 ICs, 10 diodes and 4 connectors. It belongs with the ESP32 boards of this library.
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
This is a short Video of two RevA circuit boards wired up for testing:



| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C16, C17, C18, C19, C20, C21, C22, C23, C24, C27, C28, C30, C31 +10 |
| 10 | 100 nC | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C25, C29, C32, C33, C36, C45, C46 |
| 9 | 10 kR | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R12, R30, R35, R36 |
| 7 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D6, D7, D8, D9 |
| 6 | C | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C13, C14, C15 |
| 4 | 4.7 kR | Resistor_SMD:R_0805_2012Metric | R15, R34, R37, R38 |
| 3 | 470 R | Resistor_SMD:R_0805_2012Metric | R16, R21, R22 |
| 3 | 470 kR | Resistor_SMD:R_0805_2012Metric | R6, R8, R10 |
| 3 | 9.1 kR | Resistor_SMD:R_0805_2012Metric | R23, R24, R25 |
| 3 | L | Inductor_SMD:L_Coilcraft_XxL4020 | L1, L2, L3 |
| 3 | tps63070 | tps63070:VQFN-HR-15 | U1, U2, U3 |
| 2 | 1 nC | Capacitor_SMD:C_0805_2012Metric | C37, C38 |
| 2 | 1 uC | Capacitor_SMD:C_0805_2012Metric | C26, C34 |
| 2 | 100 kR | Resistor_SMD:R_0805_2012Metric | R13, R32 |
| 2 | 12 kR | Resistor_SMD:R_0805_2012Metric | R17, R18 |
| 2 | 120 kR | Resistor_SMD:R_0805_2012Metric | R9, R11 |
| 2 | 2.2 kR | Resistor_SMD:R_0805_2012Metric | R19, R20 |
| 2 | 3.6 kR | Resistor_SMD:R_0805_2012Metric | R26, R29 |
| 2 | 5.6 kR | Resistor_SMD:R_0805_2012Metric | R27, R28 |
| 2 | Conn_01x19_MountingPin | mainboard:Molex_Easy-On_52746-1971_1x19_P0.5mm_Horizontal | J3, J4 |
| 2 | Fuse | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 0.5 R | Resistor_SMD:R_1210_3225Metric | R33 |
| 1 | 1 kR | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 150 kR | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 22 uC | Capacitor_SMD:C_1210_3225Metric | C47 |
| 1 | 500 kR | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | BH1750FVI | mainboard:WSOF6I | U6 |
| 1 | BME680 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U4 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U9 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U7 |
| 1 | Conn_01x02_MountingPin | mainboard:XT30PW | J2 |
| 1 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U8 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric | F3 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | MC6470 | Package_LGA:LGA-12_2x2mm_P0.5mm | U5 |
| 1 | PMEG3050EP,115 | mainboard:SOD-128-2 | D2 |
| 1 | S1M | Diode_SMD:D_SMA | D10 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | SPH064X | sph064x:SPH064X | U10 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.

icl-rocketry/VLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition

lhr-solar/DataAcq-SunlightPCB
This hardware includes a GPS, IMU, SD Card Reader, CAN interface, and Ethernet interface. The software on this board is responsible for data collection on the solar vehicle.

windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.

IEEE-Robotics-Club/MSU-NASA-Minds-2023
The code repository for the 2023 MSU NASA Minds competition



MoreThanRobotsFR/MTR_C3_TempHum
A tiny temperature, humidity, gas, pressure, ambient light and presence detector (mmWave presence sensor) measurement unit for HomeAssistant using ESPHome

omelia-iliffe/creature-control-board
Use this circuit board to create your own creatures!
It measures 44.3 × 46.3 mm and has 2 copper layers, 1.6 mm thick.
121 parts, built around the CP2102N-A01-GQFN24, ESP32-WROOM-32, TPS63070RNM and BH1750FVI-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TobleMiner/catear-pcb repository on GitHub, at the commit this page was made from: the board is mainboard/mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TobleMiner before reusing the design.