
DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

Use this circuit board to create your own creatures!
Ccb is an open-source printed circuit board by omelia-iliffe, from the omelia-iliffe/creature-control-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 96.9 × 61.6 mm with 90 parts on 82 nets, routed with 863 tracks and 56 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-WROOM-32D and TPA2005D1DRB, with the LM1117-3.3, LSM6DS3 and UMH3N among its other parts. Its parts include 29 resistors, 19 capacitors, 9 connectors, 8 ICs and 8 switches. It belongs with the ESP32 boards of this library.
Open an issue to request features!
I am developing a circuit board for non-organic creatures.
Auto-Program circuit - https://arduino.stackexchange.com/questions/38012/major-difference-between-dtr-signal-and-rts-signal
| GPIO Determining the Boot Mode | |||
|---|---|---|---|
| Pin | Default | Run Mode | Download Mode |
| IO0 | Pull-up | 1 | 0 |
| TXD0 | Pull-up | 1 | x |
| IO2 | Pull-down | x | 0 |
| IO5 | Pull-up | 1 | x |
| (Table from https://www.sparkfun.com/news/2017) |
Breakout Board for LSM6DS3 - https://github.com/sparkfun/LSM6DS3_Breakout https://learn.sparkfun.com/tutorials/lsm6ds3-breakout-hookup-guide
Breakout Board for TPA2005D1 - https://github.com/sparkfun/Mono_Audio_Amp_Breakout-TPA2005D1 http://cdn.sparkfun.com/datasheets/BreakoutBoards/Mono%20Audio%20Amp%20TPA2005D1%20v10.pdf
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 560E | Resistor_SMD:R_0805_2012Metric | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 |
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C7, C9, C13, C14 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric | C10, C12, C15, C16, C17, C18 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C6, C8, C19 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R7, R9 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4, R5 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R29 |
| 2 | 150k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R27, R28 |
| 2 | 330E | Resistor_SMD:R_0805_2012Metric | R8, R10 |
| 2 | D | Diode_SMD:D_SOD-323 | D1, D2 |
| 1 | 0 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S3 |
| 1 | 15 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S1 |
| 1 | 16 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S5 |
| 1 | 17 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S2 |
| 1 | 2200pF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S4 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S7 |
| 1 | BAT | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J5 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | CY8CMBR3116 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U6 |
| 1 | Cap1 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
| 1 | Cap2 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 1 | Cap3 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J3 |
| 1 | Cap4 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J4 |
| 1 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | Grove1 | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | G3 |
| 1 | Grove2 | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | G4 |
| 1 | Header_Left | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J8 |
| 1 | Header_Right | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J9 |
| 1 | I2C | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | G1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | LM1117-3.3 | OPL_Integrated_Circuit:TO-252 | U7 |
| 1 | LSM6DS3 | ccp_footprints:LGA-14L_2.5x3mm__LSM6DS3 | U5 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MICRO-USB-SMD-B-_10118193-0001LF_ | OPL_Connector:MICRO-USB5+6P-SMD-0.65-B | USB1 |
| 1 | RESET | OPL_Switch:SW2-2.6-3.0X2.5X1.2+0.4MM | SW1 |
| 1 | SPEAKER | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J7 |
| 1 | TPA2005D1 | ccp_footprints:TPA2005D1 | U8 |
| 1 | UART | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | G2 |
| 1 | UMH3N | ccp_footprints:UMH3N | U3 |
| 1 | VIN | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J6 |
The 82 most common of 90 parts.

BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.


BasementCircuits/BulletTime
ESP32 based clock using LTP305 led matrices

TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.


neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…


Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!
It measures 96.9 × 61.6 mm and has 2 copper layers, 1.6 mm thick.
90 parts, built around the CP2102N-A01-GQFN24, ESP32-WROOM-32D, TPA2005D1DRB and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the omelia-iliffe/creature-control-board repository on GitHub, at the commit this page was made from: the board is kicad/ccb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).