
PCB V1
Jonathan-0101/skeletonKey
BEng Dissertation; Penetration-testing device to highlight security system vulnerabilities

PCB files for the SMD version WiFi Nugget
V1.0-Beta WiFi Nugget is an open-source printed circuit board by RakhithJK, from the RakhithJK/WiFi-Nugget-PCB repository on GitHub. It is a 2-layer board of 36 × 50 mm with 54 parts on 58 nets, routed with 671 tracks and 59 vias.
It is built around the CP2102N-A01-GQFN24, ESP-12F and AP2112K-3.3, with the DMG3415U, SS14 and UMH3N among its other parts. Its parts include 17 resistors, 14 capacitors, 6 switches, 5 ICs and 4 diodes. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
This repository contains the PCB design files for the ESP8266 based WiFi Nugget.
Beta-v1.0:
This design is a proof of concept for a slimmer, more easily manfacturable design based off surface mount components.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12, R14, R15 |
| 6 | 4.7μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C8, C10, C11, C12, C13 |
| 5 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R6, R13 |
| 4 | 1 μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C5, C6 |
| 2 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C14 |
| 1 | 10 μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 1μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 27K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 560K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | DMG3415 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | DOWN | Button_Switch_SMD:SW_SPST_FSMSM | SW4 |
| 1 | ESP-12F | RF_Module:ESP-12E | U4 |
| 1 | JST PH 2.0 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J3 |
| 1 | LEFT | Button_Switch_SMD:SW_SPST_FSMSM | SW5 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Micro USB | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | RIGHT | Button_Switch_SMD:SW_SPST_FSMSM | SW6 |
| 1 | R_Small_US | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | Reset | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | SW3 |
| 1 | SH1106 | Display:OLED-128O064D | U2 |
| 1 | SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | SS14 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | SS14 | Diode_SMD:D_SOD-123 | D3 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | UP | Button_Switch_SMD:SW_SPST_FSMSM | SW2 |
| 1 | Val** | Deluxe-Nugg-Board-Art | Ref** |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
The 52 most common of 54 parts.

Jonathan-0101/skeletonKey
BEng Dissertation; Penetration-testing device to highlight security system vulnerabilities

wolkstein/minimal-esp32-ble-midi-ctrl
A simple Bluthooth Midi DAW transport control unit based on an esp32 mc


omelia-iliffe/creature-control-board
Use this circuit board to create your own creatures!

neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…

machadoleonardo94/HabitatControl-hardware
Hardware files for HabitatControl, designed on DipTrace

machadoleonardo94/lux-et-tenebris
Devkit for LED strips, with wide range of voltage inputs, and options for current limited outputs

It measures 36 × 50 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the CP2102N-A01-GQFN24, ESP-12F, AP2112K-3.3 and DMG3415U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RakhithJK/WiFi-Nugget-PCB repository on GitHub, at the commit this page was made from: the board is v1.0-Beta-WiFi-Nugget.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RakhithJK before reusing the design.