

Lil flite
A small and cheap flight computer
- Size
- 25 × 50 mm
- Copper layers
- 4
- Thickness
- 1.63 mm
- Parts
- 51
- Nets
- 45
- Pads
- 210
- Tracks, vias
- 406, 64
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Aug 2023
- Updated
- 13 Aug 2023
Overview
Lil flite is an open-source printed circuit board by danielstebbings, from the danielstebbings/lil-flight-hardware repository on GitHub. It is a 4-layer board of 25 × 50 mm with 51 parts on 45 nets, routed with 406 tracks and 64 vias.
It is built around the STM32F103C8T6, BMP280 and W25Q128JVSIQ, with the MC6470, AO3401A and 1N4148W-7-F-CN among its other parts. Its parts include 15 capacitors, 14 resistors, 4 ICs, 4 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
9STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHMC6470
LGA-12LGA-12 New Arrivals ROHSMEMSICUncategorisedAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs1N4148W-7-F-CN
SOD-123SOD-123 Switching Diodes ROHSChipNoboSwitching DiodesCMT-8504-100-SMT-TR
SMD,8.5x8.5mm-40℃~+85℃ 100dB 150mA 1V~6V 4kHz 4mm 5V 8.5mm 8.5mm Electromagnetic Passive (Externally Driven) Surface Mount SMD,8.5x8.5mm Buzzers ROHSCUIBuzzersUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB ConnectorsXC6206P332MR-G
UncategorisedUnknown maker
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301, C302, C303, C401, C402, C403, C404, C405, C406, C409, C410 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202, R203, R405, R406 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H201, H202, H203, H204 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R204, R401, R402 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C202, C407 |
| 3 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301, R302, R303 |
| 3 | AO3401A | JLC-Transistors:SOT23-3L | T201, T202, T203 |
| 2 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R407 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R205, R206 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J202, J203 |
| 2 | PTS645SM70-2 LFS | lil-flite:PTS645SM70-2 LFS | SW401, SW402 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C408 |
| 1 | 1N4148W-7-F | SamacSys_Parts:SOD3716X145N | D202 |
| 1 | BLUE LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D501 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U301 |
| 1 | CMT-8504-100-SMT-TR | lil-flite:XDCR_CMT-8504-100-SMT-TR | BZ201 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x06_P1.27mm_Vertical | J204 |
| 1 | MC6470 | lil-flite:PQFN50P200X200X100-12N | U302 |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D201 |
| 1 | STM32F103C8T6 | lil-flite:QFP50P900X900X160-48N | U501 |
| 1 | USB4105-GF-A | lil-flite:GCT_USB4105-GF-A | J201 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U401 |
| 1 | XC6206P332MR-G | lil-flite:SOT95P280X130-3N | PS201 |
Similar boards
- 4 layers90 × 60 mm

- 4 layers100 × 120 mm

Micromouse pcb
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
184 parts - 4 layers82 × 29 mm

Windbird fox electronics
windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.
51 parts15 - 4 layers77.1 × 76.2 mm

Tellus
IEEE-Robotics-Club/MSU-NASA-Minds-2023
The code repository for the 2023 MSU NASA Minds competition
37 parts1GPL-3.0 - 2 layers44.3 × 46.3 mm

Catear pcb
TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
121 parts1 - 2 layers100 × 50 mm

Clock pcb
MitchellStride/Hummingbird-RP2040-Clock-Module
RP2040 RTC Module, highly compatible with JLCPCB's basic SMT components.
124 parts2 - 4 layers68 × 60 mm

RoboCore V2
Plastal-Bot-Builders/RoboCoreDocumentation
RoboCore is a classroom robot kit and coding platform, designed and built in Zambia by Plastal-Bot Builders (Lusaka).
146 partsMIT - 4 layers100 × 82 mm

Questions
How big is the Lil flite PCB?
It measures 25 × 50 mm and has 4 copper layers, 1.63 mm thick.
What parts does the Lil flite use?
51 parts, built around the STM32F103C8T6, BMP280, W25Q128JVSIQ and MC6470. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lil flite KiCad files?
From the danielstebbings/lil-flight-hardware repository on GitHub, at the commit this page was made from: the board is lil-flite/lil-flite.kicad_pcb and its schematic lil-flite/Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lil flite design in my own project?
Its repository states no licence, so its author keeps all rights: ask danielstebbings before reusing the design.