
Windbird fox electronics
windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.

The code repository for the 2023 MSU NASA Minds competition
Tellus is an open-source printed circuit board by IEEE-Robotics-Club, from the IEEE-Robotics-Club/MSU-NASA-Minds-2023 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 77.1 × 76.2 mm with 37 parts on 81 nets, routed with 359 tracks and 48 vias.
It is built around the AMS1117-3.3, DEV-16771 and ICM-42670-P, with the MC6470 among its other parts. Its parts include 13 connectors, 9 capacitors, 7 ICs and 4 resistors.
The code repository for the 2023 MSU NASA Minds competition. This year we will explore different cooperative imformation gathering techniques via simulation and building a homogenous robotic swarm. This repository will be split up into several different sections:
We will be modelling and testing our system methods using ARGoS Robotic Simulator. This will serve the purpose of testing our movement algorithms and swarm logic.
Install ARGoS as per directions here https://www.argos-sim.info/core.php
Clone the ARGoS-Simulations Repository and save it in a memorable place.
Navigate to the repository using the terminal and run the command:
`$ argos3 -c Tellus-Prototype/tellus.argos
This will run the example simulation and also open the Lua editor where you can change the Robot's behaviour with a Lua Script.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J10 |
| 5 | 22uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C3, C5, C6, C8 |
| 4 | MountingHole_2.2mm_M2_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 4.7k | Resistor_SMD:R_1206_3216Metric | R2, R3, R4 |
| 3 | A3909 | Package_SO:SSOP-10_3.9x4.9mm_P1.00mm | U1, U3, U4 |
| 2 | Conn_01x04_Female | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J11, J12 |
| 1 | 0.1u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2 |
| 1 | 0.1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4 |
| 1 | 2.22u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J13 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | DEV-16771 | KicadLibs:MODULE_DEV-16771 | U5 |
| 1 | ICM-42670-P | ICM42670P:IC_ICM-42670-P | U7 |
| 1 | MC6470 | KicadLibs:PQFN50P200X200X100-12N | U6 |

windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.

TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.




Aecert-Robotics/Hexapod
A hexapod powered by Arduino using hobby servos


rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro
It measures 77.1 × 76.2 mm and has 4 copper layers, 4.69 mm thick.
37 parts, built around the AMS1117-3.3, DEV-16771, ICM-42670-P and MC6470. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IEEE-Robotics-Club/MSU-NASA-Minds-2023 repository on GitHub, at the commit this page was made from: the board is Hardware/Tellus/Tellus.kicad_pcb and its schematic Hardware/Tellus/Tellus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).