
CANInstallHub
charlesrwest/CANInstallHub
A temporary home for the PCB design files for the CANInstallPrototype

FLIGHT CONTROLLER DEMO
PCB FC is an open-source printed circuit board by pratik-mk25, from the pratik-mk25/PCB_FC repository on GitHub. It is a 2-layer board of 41.2 × 38.6 mm with 45 parts on 76 nets, routed with 359 tracks and 12 vias.
It is built around the STM32F405RGT6, BMP388 and AMS1117-3.3, with the ICM-42670-P, 10104111-0001LF and X32258MOB4SI among its other parts. Its parts include 18 capacitors, 12 resistors, 4 ICs, 3 connectors and 1 diode. It belongs with the STM32 boards of this library.
FLIGHT CONTROLLER DEMO
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C15, C16, C17, C18, C19, C20, C21 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C10, C11 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R8 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R11 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10104111-0001LF | Footprint:10104111-0001LF | J1 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BMP388 | Footprint:BMP388 | U1 |
| 1 | ICM-42670-P | Footprint:ICM-42670-P | IC2 |
| 1 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | STM32F405RGT6 | Footprint:STM32F405RGT6 | IC1 |
| 1 | TestPoint | Connector_Pin:Pin_D1.3mm_L11.3mm_W2.8mm_Flat | TP1 |
| 1 | X32258MOB4SI | Footprint:X32258MOB4SI | Y1 |
The 41 most common of 45 parts.

charlesrwest/CANInstallHub
A temporary home for the PCB design files for the CANInstallPrototype

KPI-Rover/ecu_hw
Development of a printed circuit board (PCB) for the chassis controller.


JLjoestar23/STM32_FlightController
PCB, software, firmware, and other files related to a custom made STM32-based flight controller.


ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 41.2 × 38.6 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the STM32F405RGT6, BMP388, AMS1117-3.3 and ICM-42670-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pratik-mk25/PCB_FC repository on GitHub, at the commit this page was made from: the board is PCB_FC.kicad_pcb and its schematic PCB_FC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pratik-mk25 before reusing the design.