
RedPitaya Lockbox
TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

STM32 Based Flight Controller
Flight controller 1.0.0 is an open-source printed circuit board by OgnjenL, from the OgnjenL/flight-controller-f405 repository on GitHub. It is a 4-layer board of 40 × 40 mm with 67 parts on 77 nets, routed with 581 tracks and 127 vias.
It is built around the STM32F405RGT6, ICM-42670-P and LT86102UX. Its parts include 25 capacitors, 13 resistors, 7 diodes, 5 connectors and 1 switch. It belongs with the robots and motor control boards and the STM32 boards of this library.
This project focuses on PCB design around the STM32F405 MCU. It features a 4-layer PCB with dedicated ground and power planes with an integrated IMU.

The board is designed according to JLCPCB's manufacturing constraints, and the BOM is for LCSC parts.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C9, C12, C13, C17, C23, C24 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C10, C19, C22 |
| 3 | 10p | Capacitor_SMD:C_0402_1005Metric | C16, C18, C25 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C6, C14, C15 |
| 3 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C7, C8, C11 |
| 3 | 300 | Resistor_SMD:R_0603_1608Metric | R7, R9, R13 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 10u | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 121 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1Meg | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 243k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_D1.0mm | 3.3V |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | 5V |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08_Socket | SM08B-SRSS-TB_LF__SN_:JST_SM08B-SRSS-TB_LF__SN_ | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | D | Diode_SMD:D_0603_1608Metric | D8 |
| 1 | D_TVS | Diode_SMD:Nexperia_CFP3_SOD-123W | D6 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | GND |
| 1 | ICM-42670-P | ICM-42670-P:XDCR_ICM-42670-P | MT1 |
| 1 | LT1117-ADJ | Package_TO_SOT_SMD:SOT-89-3 | LDO |
| 1 | LT8610 | Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_ThermalVias | BUCK |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | STM32 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
The 63 most common of 67 parts.

TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

TU-Darmstadt-APQ/RedPitaya-IntStab
Digital controller for laser intensity stabilization based on the RedPitaya STEMlab 125-14 board

UChicago-Space-Program/pulse-hardware
This is the central repository for documents related to PULSE-A hardware development.



omarothman2004/Buck-Converter-
A 5V, LT8610-based step-down DC-DC switching regulator board, designed with thermal performance and EMI in mind.

ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:

It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.
67 parts, built around the STM32F405RGT6, ICM-42670-P and LT86102UX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OgnjenL/flight-controller-f405 repository on GitHub, at the commit this page was made from: the board is Flight controller 1.0.0.kicad_pcb and its schematic Flight controller 1.0.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OgnjenL before reusing the design.