MCU

78 boards

KiCad boards from 29 GitHub repositories tagged “mcu”, the most starred first; open any of them in PCBKit.

2 layers21.2 × 51.6 mm
EnvPicoLiPo
Envious-Data/EnvOpenPico
An open source RP2040 MCU Board Family
57 parts151GPL-3.0
2 layers40.6 × 27.9 mm
CH552
nicola-strappazzon/CH552
Basic projects with CH552G
23 parts37LGPL-2.1
2 layers50.3 × 25.8 mm
U3 MLAB ADAPTER
MLAB-project/Modules
MLAB hardware modules and building blocks
22 parts17GPL-3.0
2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16
2 layers25.9 × 56.4 mm
RSTM32F030C8T6
r-pv/rSTM32F030C8T6_ProMiniPlus
An ST development board based on the STM32F030C8T6 MCU compatible with STM32Duino (Arduino).
27 parts14GPL-3.0
2 layers252.8 × 229.6 mm
Keys lefthand
blueOkiris/ps-ohk
Type with only one hand
83 parts13GPL-3.0
2 layers36.4 × 29.4 mm
Kicad Smart Watch
AFLProjects/DIY-Smart-Watch
DIY Smart Watch with ATMEGA32U4 , ST7789 SPI display and RV3028-C7 Extreme Low Power RTC Module
63 parts12
2 layers115 × 70 mm
Mcu proto-115x70mm
galopago/misistemote
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board.
2,786 parts11MIT
2 layers22 × 41 mm
RSTM32F030K6T6
r-pv/STM32F030K6
Custom board for the STM32F30K6T6 MCU, compatible with STM32Duino (Arduino).
23 parts11GPL-3.0
2 layers42.3 × 55.8 mm
RSTM32F405RGT6 B
r-pv/STM32F405RGT6_STUnoPlus
An ST development board based on the STM32F405RGT6 MCU compatible with STM32Duino (Arduino).
53 parts9GPL-3.0
2 layers65 × 59 mm
Mender shield
joelguittet/mender-shield
The Mender Shield illustrates the capability to run a Mender client on heterogeneous platforms
54 parts5Apache-2.0
2 layers100 × 100 mm
Pcb controller
La-guajolota/Robotica
Simuladores, calculadoras, recursos para el diseño de robots. Cinemática directa e inversa, dinemática, etc
96 parts4MIT
2 layers87.9 × 88 mm
Pico hd mcu v2
ozgend/hd-mcu
bluetooth supported mcu for harley davidson 99-03 with raspberry pi pico
53 parts4GPL-3.0
4 layers25.6 × 15.5 mm
F350
SoCXin/GD32F350
L4 R4：GigaDevice Cortex-M4 108MHz MCU (GD32F350)
28 parts3
2 layers36 × 48.3 mm
SA818 BREAKOUT
galopago/dil-breakout-pcb
Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.
14 parts2MIT
2 layers42.5 × 62.5 mm
RSTM32F103VET6
r-pv/STM32F103VET6_STUno
An ST development board based on the STM32F103VET6 MCU compatible with STM32Duino (Arduino).
38 parts2GPL-3.0
2 layers50.8 × 24.1 mm
Embedded debug
stephendpmurphy/embedded-debug
The embedded debug board can be used to provide access to Target MCU debug UART lines carried on unused traces of a 10pin SWD connector
23 parts2CC-BY-SA-4.0
4 layers45.5 × 19.6 mm
Stm32 bluet pill
brendose/stm32_bluet_pill
This project is a 1.8V STM32WB55 Bluetooth Module with battery charging. The purpose of this project is to provide a development platform for mobile wearable devices.
93 parts1
2 layers60 × 63 mm
ATMEGA328P AU BASE CYUSB v1.0
kgsully/MCU.ATMEGA328P-AU-Base
Base Schematic and PCB for ATMEGA328P-AU w/ USB-UART Bridge
52 parts1
2 layers80.8 × 101.1 mm
DATALOGGER01
mlab-modules/DATALOGGER01
Universal Arduino based data logger to SDcard.
90 parts1GPL-3.0
4 layers101.6 × 53.3 mm
H730duino
SoCXin/STM32H730
L6 R5：ST Cortex-M7 550MHz MCU (STM32H730)
124 parts1
2 layers12.1 × 36.7 mm
JLCPCB HOLIDAY PROJECT
WingTechCorner/WTC_PROJECT-XMAS-USB-ORNAMENT
A little cool XMAS project
70 parts1
4 layers40 × 30 mm
Health Watch
abendezu10/PulseWatch
Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring.
37 parts
2 layers142.6 × 85.1 mm
LineFollower Speedy-
Club-robotica-UDLSB/LineFollower-Speedy-
Documentación del desarrollo del Seguidor de línea (El speedy)
89 partsGPL-3.0