
RedPitaya Lockbox
TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

A 5V, LT8610-based step-down DC-DC switching regulator board, designed with thermal performance and EMI in mind.
Buck Converter- is an open-source printed circuit board by omarothman2004, from the omarothman2004/Buck-Converter- repository on GitHub, published under the MIT licence. It is a 2-layer board of 46.4 × 38.1 mm with 23 parts on 11 nets, routed with 112 tracks and 21 vias.
It is built around the LT86102UX. Its parts include 6 capacitors, 3 resistors, 1 IC, 1 connector and 1 inductor. It belongs with the power boards of this library.
This repository contains the hardware design files for a switch-mode step-down (buck) DC-DC converter. The project focuses on high-efficiency voltage conversion, low output ripple, and careful layout considerations for switching nodes. Manufacturing (gerber) files are available to make a copy of your own with a PCB fabricator (JLCPCB, PCBWay etc.).
/schematic: KiCad schematic files (.sch / .kicad_sch)./layout: PCB layout files (.kicad_pcb)./gerber: Manufacturing outputs and BOM.| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MH1, MH2, MH3, MH4 |
| 3 | 100k | Resistor_SMD:R_0201_0603Metric | R2, RFB2, RT1 |
| 2 | 22µ | Capacitor_SMD:C_1210_3225Metric | C5, C6 |
| 1 | 0.1µ | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 10n | Capacitor_SMD:C_0201_0603Metric | C2 |
| 1 | 10µ | Inductor_SMD:L_Neosid_SMS-ME3015 | L1 |
| 1 | 2.5 | Resistor_SMD:R_1206_3216Metric | RLOAD1 |
| 1 | 4.7µ | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 425k | Resistor_SMD:R_0201_0603Metric | RFB1 |
| 1 | 47µ | Capacitor_SMD:C_1210_3225Metric | C7 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | LT8610 | Package_DFN_QFN:QFN-16-1EP_1.8x2.6mm_P0.4mm_EP0.7x1.5mm | U1 |

TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

TU-Darmstadt-APQ/RedPitaya-IntStab
Digital controller for laser intensity stabilization based on the RedPitaya STEMlab 125-14 board

UChicago-Space-Program/pulse-hardware
This is the central repository for documents related to PULSE-A hardware development.





google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
It measures 46.4 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the LT86102UX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the omarothman2004/Buck-Converter- repository on GitHub, at the commit this page was made from: the board is kicad/Buck Converter.kicad_pcb and its schematic kicad/Buck Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).