Skip to the content

STM32F405RGT6

STMicroelectronicsExtended

-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F405RGT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-64(10x10)
Pins
64
In stock
900 at JLCPCB (C15742)
Used on
170 open-source boards

Overview

The STM32F405RGT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F405RGTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 900 are in stock at JLCPCB (part C15742). 170 open-source boards in 141 repositories on GitHub use it.

Symbol

1VBAT2PC133PC144PC155PH06PH17NRST8PC09PC110PC211PC312VSSA13VDDA14PA015PA116PA217PA318VSS19VDD20PA421PA522PA623PA724PC425PC526PB027PB128PB229PB1030PB1131VCAP_132VDD33PB1234PB1335PB1436PB1537PC638PC739PC840PC941PA842PA943PA1044PA1145PA1246PA1347VCAP_248VDD49PA1450PA1551PC1052PC1153PC1254PD255PB356PB457PB558PB659PB760BOOT061PB862PB964VDD
MCU_ST_STM32F4:STM32F405RGTxFrom KiCad's library

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

16
Supply, least
1.8 V · VDD, recommended operating min · p. 77
Supply, most
3.6 V · VDD, recommended operating max · p. 77
Supply, most
2.4 V · VDDA, recommended operating max, ADC limited to 1.2 M samples · p. 77
Supply, least
2.4 V · VDDA, recommended operating min, ADC limited to 1.4 M samples · p. 77
Supply, least
1.65 V · VBAT, recommended operating min · p. 77
Supply, absolute maximum
4 V · VDD including VDDA, absolute max · p. 76
Works from
-40 °C · Ambient min, suffix 6, maximum power dissipation · p. 78
Works up to
85 °C · Ambient max, suffix 6, maximum power dissipation · p. 78
Works up to
105 °C · Ambient max, suffix 6, low power dissipation subject to TJmax · p. 78
Junction, hottest
125 °C · Junction temperature absolute max · p. 77
Junction, hottest
105 °C · Junction temperature operating max, suffix 6 · p. 78
Takes working
87 mA · VDD typical Run, 168 MHz, ART enabled or RAM, peripherals enabled, 25 °C · p. 83
Takes at most
117 mA · VDD max Run, 168 MHz, ART disabled, peripherals enabled, 105 °C · p. 84
Takes asleep
2.2 µA · VDD typical Standby, 3.3 V, 25 °C, backup SRAM and RTC OFF · p. 88
A pin gives at most
25 mA · I/O sink absolute max per pin · p. 77
Junction to air (LQFP64)
46 K/W · Junction-to-ambient thermal resistance · p. 169

What it is and has

17
Core
ARM 32-bit Cortex-M4 CPU with FPU · p. 1
Maximum clock
168 MHz · p. 1
DSP
DSP instructions · p. 1
DAC
2 × 12-bit · p. 1
DMA
16 streams, FIFOs and burst support · p. 1
Random number generator
True random number generator · p. 1
CRC
CRC calculation unit · p. 1
Unique ID
96-bit · p. 1
RTC
Subsecond accuracy, hardware calendar · p. 1
Backup SRAM
4 Kbyte · p. 29
Backup registers
80 bytes · p. 29
Low-power modes
Sleep, Stop and Standby · p. 1
Core
ARM Cortex-M4, 32-bit, FPU, 210 DMIPS · p. 1
Package
LQFP64 (10 × 10 mm) · p. 1
Core
ARM Cortex-M4 32b MCU+FPU · p. 1
Debug interfaces
SWD and JTAG · p. 1
Trace
Cortex-M4 Embedded Trace Macrocell · p. 1

Around it

4
cap 2.2 µF
between VCAP_1 and VSS; Ceramic regulator stabilization capacitor; place close to pin. Replace with 100 nF when regulator is OFF. · p. 75
cap 100 nF
between VDD and VSS; One filtering ceramic capacitor at each supply pair, placed as close as possible to or below its pins. · p. 75
cap 4.7 µF
between VDD and VSS; Ceramic capacitor connected to one VDD pin. · p. 75
cap 100 nF + 1 μF
between VDDA and VSSA; Filtering ceramic capacitors, placed close to the supply pins. · p. 75

Specifications

623
ParameterConditionsAs printedPage
External main supply voltage (including VDDA, VDD) VDD–VSSmin -0.3 · max 4 V76
Input voltage on any other pin VINMinimum VSS–0.3max 4 V76
Variations between different VDD power pins |ΔVDDx|max 50 mV76
Variations between all the different ground pins |VSSX − VSS|max 50 mV76
Total current into VDD power lines (source) IVDDmax 150 mA77
Total current out of VSS ground lines (sink) IVSSmax 150 mA77
Output current sunk by any I/O and control pin IIOmax 25 mA77
Output current source by any I/Os and control pin IIOmax 25 mA77
Injected current on any other pin IINJ(PIN)Rating ±5 mAmax 5 mA77
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN)Rating ±25 mA; absolute sum of positive and negative injected currentsmax 25 mA77
Storage temperature range TSTGmin -65 · max 150 °C77
Maximum junction temperature TJmax 125 °C77
Internal AHB clock frequency fHCLKVOS bit in PWR_CR register = 0min 0 · max 144 MHz77
Internal AHB clock frequency fHCLKVOS bit in PWR_CR register = 1min 0 · max 168 MHz77
Internal APB1 clock frequency fPCLK1min 0 · max 42 MHz77
Internal APB2 clock frequency fPCLK2min 0 · max 84 MHz77
Standard operating voltage VDDmin 1.8 · max 3.6 V77
Analog operating voltage (ADC limited to 1.2 M samples) VDDAMust be the same potential as VDDmin 1.8 · max 2.4 V77
Analog operating voltage (ADC limited to 1.4 M samples) VDDAMust be the same potential as VDDmin 2.4 · max 3.6 V77
Backup operating voltage VBATmin 1.65 · max 3.6 V77
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 0; max frequency 144MHzmin 1.08 · typ 1.14 · max 1.2 V78
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 1; max frequency 168MHzmin 1.2 · typ 1.26 · max 1.32 V78
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 144MHzmin 1.1 · typ 1.14 · max 1.2 V78
Regulator OFF: 1.2 V external voltage must be supplied from external regulator on VCAP_1/VCAP_2 pins V12Max frequency 168MHzmin 1.2 · typ 1.26 · max 1.3 V78
Input voltage on RST and FT pins VIN2 V ≤ VDD ≤ 3.6 Vmin -0.3 · max 5.5 V78
Input voltage on RST and FT pins VINVDD ≤ 2 Vmin -0.3 · max 5.2 V78
Input voltage on TTa pins VINMaximum VDDA+0.3 Vmin -0.3 V78
Input voltage on B pin VINmax 5.5 V78
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP64; suffix 6, TA = 85 °Cmax 435 mW78
Ambient temperature for 6 suffix version TAMaximum power dissipationmin -40 · max 85 °C78
Ambient temperature for 6 suffix version TALow power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C78
Junction temperature range TJ6 suffix versionmin -40 · max 105 °C78
Capacitance of external capacitor CEXTtyp 2.2 uF80
ESR of external capacitor ESRStrictly less than 2 Ωmax 2 Ω80
VDD rise time rate tVDDRegulator ON; maximum ∞min 20 us/V80
VDD fall time rate tVDDRegulator ON; maximum ∞min 20 us/V80
VDD rise time rate tVDDPower-up; maximum ∞min 20 us/V80
VDD fall time rate tVDDPower-down; maximum ∞min 20 us/V80
VCAP_1 and VCAP_2 rise time rate tVCAPPower-up; maximum ∞min 20 us/V80
VCAP_1 and VCAP_2 fall time rate tVCAPPower-down; maximum ∞min 20 us/V80
Programmable voltage detector level selection VPVDPLS[2:0]=000 (rising edge)min 2.09 · typ 2.14 · max 2.19 V81
Programmable voltage detector level selection VPVDPLS[2:0]=000 (falling edge)min 1.98 · typ 2.04 · max 2.08 V81
Programmable voltage detector level selection VPVDPLS[2:0]=001 (rising edge)min 2.23 · typ 2.3 · max 2.37 V81
Programmable voltage detector level selection VPVDPLS[2:0]=001 (falling edge)min 2.13 · typ 2.19 · max 2.25 V81
Programmable voltage detector level selection VPVDPLS[2:0]=010 (rising edge)min 2.39 · typ 2.45 · max 2.51 V81
Programmable voltage detector level selection VPVDPLS[2:0]=010 (falling edge)min 2.29 · typ 2.35 · max 2.39 V81
Programmable voltage detector level selection VPVDPLS[2:0]=011 (rising edge)min 2.54 · typ 2.6 · max 2.65 V81
Programmable voltage detector level selection VPVDPLS[2:0]=011 (falling edge)min 2.44 · typ 2.51 · max 2.56 V81
Programmable voltage detector level selection VPVDPLS[2:0]=100 (rising edge)min 2.7 · typ 2.76 · max 2.82 V81
Programmable voltage detector level selection VPVDPLS[2:0]=100 (falling edge)min 2.59 · typ 2.66 · max 2.71 V81
Programmable voltage detector level selection VPVDPLS[2:0]=101 (rising edge)min 2.86 · typ 2.93 · max 2.99 V81
Programmable voltage detector level selection VPVDPLS[2:0]=101 (falling edge)min 2.65 · typ 2.84 · max 3.02 V81
Programmable voltage detector level selection VPVDPLS[2:0]=110 (rising edge)min 2.96 · typ 3.03 · max 3.1 V81
Programmable voltage detector level selection VPVDPLS[2:0]=110 (falling edge)min 2.85 · typ 2.93 · max 2.99 V81
Programmable voltage detector level selection VPVDPLS[2:0]=111 (rising edge)min 3.07 · typ 3.14 · max 3.21 V81
Programmable voltage detector level selection VPVDPLS[2:0]=111 (falling edge)min 2.95 · typ 3.03 · max 3.09 V81
PVD hysteresis VPVDhysttyp 100 mV81
Power-on/power-down reset threshold VPOR/PDRFalling edgemin 1.6 · typ 1.68 · max 1.76 V81
Power-on/power-down reset threshold VPOR/PDRRising edgemin 1.64 · typ 1.72 · max 1.8 V81
PDR hysteresis VPDRhysttyp 40 mV81
Brownout level 1 threshold VBOR1Falling edgemin 2.13 · typ 2.19 · max 2.24 V81
Brownout level 1 threshold VBOR1Rising edgemin 2.23 · typ 2.29 · max 2.33 V81
Brownout level 2 threshold VBOR2Falling edgemin 2.44 · typ 2.5 · max 2.56 V81
Brownout level 2 threshold VBOR2Rising edgemin 2.53 · typ 2.59 · max 2.63 V81
Brownout level 3 threshold VBOR3Falling edgemin 2.75 · typ 2.83 · max 2.88 V81
Brownout level 3 threshold VBOR3Rising edgemin 2.85 · typ 2.92 · max 2.97 V81
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; typ TA=25 °C, max TA=85 °Ctyp 87 · max 102 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; TA=105 °Cmax 109 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; typ TA=25 °C, max TA=85 °Ctyp 67 · max 80 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; TA=105 °Cmax 86 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; typ TA=25 °C, max TA=85 °Ctyp 56 · max 69 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; TA=105 °Cmax 75 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; typ TA=25 °C, max TA=85 °Ctyp 44 · max 56 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; TA=105 °Cmax 62 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; typ TA=25 °C, max TA=85 °Ctyp 30 · max 42 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; TA=105 °Cmax 49 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; typ TA=25 °C, max TA=85 °Ctyp 16 · max 28 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; TA=105 °Cmax 35 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; typ TA=25 °C, max TA=85 °Ctyp 12 · max 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; TA=105 °Cmax 31 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz, HCLK=system clock/2; typ TA=25 °C, max TA=85 °Ctyp 9 · max 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz, HCLK=system clock/2; TA=105 °Cmax 28 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; typ TA=25 °C, max TA=85 °Ctyp 5 · max 17 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA=105 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; typ TA=25 °C, max TA=85 °Ctyp 3 · max 15 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; TA=105 °Cmax 22 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; TA=105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; typ TA=25 °C, max TA=85 °Ctyp 40 · max 54 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; TA=105 °Cmax 61 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; typ TA=25 °C, max TA=85 °Ctyp 31 · max 43 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; TA=105 °Cmax 50 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; typ TA=25 °C, max TA=85 °Ctyp 26 · max 38 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; TA=105 °Cmax 45 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; typ TA=25 °C, max TA=85 °Ctyp 20 · max 32 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; TA=105 °Cmax 39 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; typ TA=25 °C, max TA=85 °Ctyp 14 · max 26 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; TA=105 °Cmax 33 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; typ TA=25 °C, max TA=85 °Ctyp 8 · max 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; TA=105 °Cmax 27 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; typ TA=25 °C, max TA=85 °Ctyp 6 · max 18 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; TA=105 °Cmax 25 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz, HCLK=system clock/2; typ TA=25 °C, max TA=85 °Ctyp 5 · max 16 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz, HCLK=system clock/2; TA=105 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; typ TA=25 °C, max TA=85 °Ctyp 3 · max 15 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA=105 °Cmax 22 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; TA=105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 2 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 2 MHz; TA=105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; typ TA=25 °C, max TA=85 °Ctyp 93 · max 109 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; TA=105 °Cmax 117 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; typ TA=25 °C, max TA=85 °Ctyp 76 · max 89 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; TA=105 °Cmax 96 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; typ TA=25 °C, max TA=85 °Ctyp 67 · max 79 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; TA=105 °Cmax 86 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; typ TA=25 °C, max TA=85 °Ctyp 53 · max 65 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; TA=105 °Cmax 73 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; typ TA=25 °C, max TA=85 °Ctyp 37 · max 49 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; TA=105 °Cmax 56 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; typ TA=25 °C, max TA=85 °Ctyp 20 · max 32 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; TA=105 °Cmax 39 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; typ TA=25 °C, max TA=85 °Ctyp 16 · max 27 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; TA=105 °Cmax 35 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; typ TA=25 °C, max TA=85 °Ctyp 11 · max 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; TA=105 °Cmax 30 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; typ TA=25 °C, max TA=85 °Ctyp 6 · max 18 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA=105 °Cmax 25 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; typ TA=25 °C, max TA=85 °Ctyp 4 · max 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; TA=105 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; typ TA=25 °C, max TA=85 °Ctyp 3 · max 15 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; TA=105 °Cmax 22 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; typ TA=25 °C, max TA=85 °Ctyp 46 · max 61 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; TA=105 °Cmax 69 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; typ TA=25 °C, max TA=85 °Ctyp 40 · max 52 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; TA=105 °Cmax 60 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; typ TA=25 °C, max TA=85 °Ctyp 37 · max 48 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; TA=105 °Cmax 56 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; typ TA=25 °C, max TA=85 °Ctyp 30 · max 42 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; TA=105 °Cmax 50 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; typ TA=25 °C, max TA=85 °Ctyp 22 · max 33 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; TA=105 °Cmax 41 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; typ TA=25 °C, max TA=85 °Ctyp 12 · max 24 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; TA=105 °Cmax 31 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; typ TA=25 °C, max TA=85 °Ctyp 10 · max 21 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; TA=105 °Cmax 29 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; typ TA=25 °C, max TA=85 °Ctyp 7 · max 19 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; TA=105 °Cmax 26 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; typ TA=25 °C, max TA=85 °Ctyp 4 · max 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA=105 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; typ TA=25 °C, max TA=85 °Ctyp 3 · max 15 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; TA=105 °Cmax 22 mA84
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 168 MHz; typ TA=25 °C, max TA=85 °Ctyp 59 · max 77 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 168 MHz; TA=105 °Cmax 84 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 144 MHz; typ TA=25 °C, max TA=85 °Ctyp 46 · max 61 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 144 MHz; TA=105 °Cmax 67 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 120 MHz; typ TA=25 °C, max TA=85 °Ctyp 38 · max 53 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 120 MHz; TA=105 °Cmax 60 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 90 MHz; typ TA=25 °C, max TA=85 °Ctyp 30 · max 44 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 90 MHz; TA=105 °Cmax 51 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 60 MHz; typ TA=25 °C, max TA=85 °Ctyp 20 · max 34 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 60 MHz; TA=105 °Cmax 41 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 30 MHz; typ TA=25 °C, max TA=85 °Ctyp 11 · max 24 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 30 MHz; TA=105 °Cmax 31 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 25 MHz; typ TA=25 °C, max TA=85 °Ctyp 8 · max 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 25 MHz; TA=105 °Cmax 28 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 16 MHz; typ TA=25 °C, max TA=85 °Ctyp 6 · max 18 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 16 MHz; TA=105 °Cmax 25 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 8 MHz; typ TA=25 °C, max TA=85 °Ctyp 3 · max 16 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 8 MHz; TA=105 °Cmax 23 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 4 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 15 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 4 MHz; TA=105 °Cmax 22 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 2 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 14 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 2 MHz; TA=105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 168 MHz; typ TA=25 °C, max TA=85 °Ctyp 12 · max 27 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 168 MHz; TA=105 °Cmax 35 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 144 MHz; typ TA=25 °C, max TA=85 °Ctyp 9 · max 22 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 144 MHz; TA=105 °Cmax 29 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 120 MHz; typ TA=25 °C, max TA=85 °Ctyp 8 · max 20 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 120 MHz; TA=105 °Cmax 28 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 90 MHz; typ TA=25 °C, max TA=85 °Ctyp 7 · max 19 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 90 MHz; TA=105 °Cmax 26 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 60 MHz; typ TA=25 °C, max TA=85 °Ctyp 5 · max 17 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 60 MHz; TA=105 °Cmax 24 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 30 MHz; typ TA=25 °C, max TA=85 °Ctyp 3 · max 16 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 30 MHz; TA=105 °Cmax 23 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 25 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 15 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 25 MHz; TA=105 °Cmax 22 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 16 MHz; typ TA=25 °C, max TA=85 °Ctyp 2 · max 14 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 16 MHz; TA=105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 8 MHz; typ TA=25 °C, max TA=85 °Ctyp 1 · max 14 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 8 MHz; TA=105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 4 MHz; typ TA=25 °C, max TA=85 °Ctyp 1 · max 13 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 4 MHz; TA=105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 2 MHz; typ TA=25 °C, max TA=85 °Ctyp 1 · max 13 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 2 MHz; TA=105 °Cmax 21 mA87
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode; oscillators OFF; no independent watchdog; TA=25 °Ctyp 0.4 · max 1.5 mA88
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode; oscillators OFF; no independent watchdog; TA=85 °Cmax 11 mA88
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode; oscillators OFF; no independent watchdog; TA=105 °Cmax 20 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Stop mode; oscillators OFF; no independent watchdog; TA=25 °Ctyp 0.31 · max 1.1 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Stop mode; oscillators OFF; no independent watchdog; TA=85 °Cmax 8 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Stop mode; oscillators OFF; no independent watchdog; TA=105 °Cmax 15 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode; oscillators OFF; no independent watchdog; TA=25 °Ctyp 0.28 · max 1.1 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode; oscillators OFF; no independent watchdog; TA=85 °Cmax 8 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode; oscillators OFF; no independent watchdog; TA=105 °Cmax 15 mA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA=25 °C, VDD=1.8 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA=25 °C, VDD=2.4 Vtyp 3.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA=25 °C, VDD=3.3 Vtyp 4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA=85 °C, VDD=3.6 Vmax 20 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA=105 °C, VDD=3.6 Vmax 36 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA=25 °C, VDD=1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA=25 °C, VDD=2.4 Vtyp 2.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA=25 °C, VDD=3.3 Vtyp 3.3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA=85 °C, VDD=3.6 Vmax 16 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA=105 °C, VDD=3.6 Vmax 32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA=25 °C, VDD=1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA=25 °C, VDD=2.4 Vtyp 2.6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA=25 °C, VDD=3.3 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA=85 °C, VDD=3.6 Vmax 12.5 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA=105 °C, VDD=3.6 Vmax 24.8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA=25 °C, VDD=1.8 Vtyp 1.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA=25 °C, VDD=2.4 Vtyp 1.9 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA=25 °C, VDD=3.3 Vtyp 2.2 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA=85 °C, VDD=3.6 Vmax 9.8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA=105 °C, VDD=3.6 Vmax 19.2 uA88
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA=25 °C, VBAT=1.8 Vtyp 1.29 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA=25 °C, VBAT=2.4 Vtyp 1.42 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA=25 °C, VBAT=3.3 Vtyp 1.68 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA=85 °C, VBAT=3.6 Vmax 6 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA=105 °C, VBAT=3.6 Vmax 11 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA=25 °C, VBAT=1.8 Vtyp 0.62 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA=25 °C, VBAT=2.4 Vtyp 0.73 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA=25 °C, VBAT=3.3 Vtyp 0.96 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA=85 °C, VBAT=3.6 Vmax 3 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA=105 °C, VBAT=3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA=25 °C, VBAT=1.8 Vtyp 0.79 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA=25 °C, VBAT=2.4 Vtyp 0.81 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA=25 °C, VBAT=3.3 Vtyp 0.86 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA=85 °C, VBAT=3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA=105 °C, VBAT=3.6 Vmax 10 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA=25 °C, VBAT=1.8 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA=25 °C, VBAT=2.4 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA=25 °C, VBAT=3.3 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA=85 °C, VBAT=3.6 Vmax 2 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA=105 °C, VBAT=3.6 Vmax 4 uA89
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C conforming to JESD22-A114; class 2; except VBATmax 2000 V108
Electrostatic discharge voltage (human body model) VESD(HBM)VBAT pinmax 1000 V108
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C conforming to JESD22-C101; class IImax 500 V108
Input low level voltage VILTTL ports; 2.7 V ≤ VDD ≤ 3.6 Vmax 0.8 V110
Input high level voltage VIHTTL ports; 2.7 V ≤ VDD ≤ 3.6 Vmin 2 V110
I/O Schmitt trigger voltage hysteresis Vhystyp 200 mV110
I/O input leakage current IlkgVSS ≤ VIN ≤ VDD; maximum ±1 uAmax 1 uA110
I/O FT input leakage current IlkgVIN = 5 Vmax 3 uA110
Weak pull-up equivalent resistor RPUAll pins except for PA10 and PB12; VIN = VSSmin 30 · typ 40 · max 50 kΩ110
Weak pull-up equivalent resistor RPUPA10 and PB12; VIN = VSSmin 8 · typ 11 · max 15 kΩ110
Weak pull-down equivalent resistor RPDAll pins except for PA10 and PB12; VIN = VDDmin 30 · typ 40 · max 50 kΩ110
Weak pull-down equivalent resistor RPDPA10 and PB12; VIN = VDDmin 8 · typ 11 · max 15 kΩ110
I/O pin capacitance CIOtyp 5 pF110
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLCMOS port; IIO = +8 mA; 2.7 V < VDD < 3.6 Vmax 0.4 V111
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLTTL port; IIO = +8 mA; 2.7 V < VDD < 3.6 Vmax 0.4 V111
Output high level voltage for an I/O pin when 8 pins are sourced at same time VOHTTL port; IIO = +8 mA; 2.7 V < VDD < 3.6 Vmin 2.4 V111
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLIIO = +20 mA; 2.7 V < VDD < 3.6 Vmax 1.3 V111
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLIIO = +6 mA; 2 V < VDD < 2.7 Vmax 0.4 V111
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=00; CL = 50 pF, VDD > 2.70 Vmax 2 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=00; CL = 50 pF, VDD > 1.8 Vmax 2 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=01; CL = 50 pF, VDD > 2.70 Vmax 25 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=01; CL = 50 pF, VDD > 1.8 Vmax 12.5 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=01; CL = 10 pF, VDD > 2.70 Vmax 50 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=10; CL = 40 pF, VDD > 2.70 Vmax 50 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=10; CL = 40 pF, VDD > 1.8 Vmax 25 MHz112
Maximum frequency fmax(IO)outOSPEEDRy[1:0]=10; CL = 10 pF, VDD > 2.70 Vmax 100 MHz112
Maximum frequency Fmax(IO)outOSPEEDRy[1:0]=11; CL = 30 pF, VDD > 2.70 Vmax 100 MHz113
Maximum frequency Fmax(IO)outOSPEEDRy[1:0]=11; CL = 30 pF, VDD > 1.8 Vmax 50 MHz113
Maximum frequency Fmax(IO)outOSPEEDRy[1:0]=11; CL = 10 pF, VDD > 2.70 Vmax 200 MHz113
Pulse width of external signals detected by the EXTI controller tEXTIpwmin 10 ns113
Thermal resistance junction-ambient ΘJALQFP64 - 10 × 10 mm / 0.5 mm pitchtyp 46 °C/W169
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 0; maximum frequency 144 MHzmin 1.08 · typ 1.14 · max 1.2 V78
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12VOS bit in PWR_CR register = 1; maximum frequency 168 MHzmin 1.2 · typ 1.26 · max 1.32 V78
BOR hysteresis VBORhystGuaranteed by design, not tested in productiontyp 100 mV82
Reset temporization TRSTTEMPOGuaranteed by design, not tested in productionmin 0.5 · typ 1.5 · max 3 ms82
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSHGuaranteed by design, not tested in productiontyp 160 · max 200 mA82
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSHVDD = 1.8 V, TA = 105 °C, IRUSH = 171 mA for 31 usmax 5.4 uC82
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 87 · max 102 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; TA = 105 °Cmax 109 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 67 · max 80 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; TA = 105 °Cmax 86 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 56 · max 69 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; TA = 105 °Cmax 75 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 44 · max 56 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; TA = 105 °Cmax 62 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 30 · max 42 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; TA = 105 °Cmax 49 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 16 · max 28 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; TA = 105 °Cmax 35 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 12 · max 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; TA = 105 °Cmax 31 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz, HCLK = system clock/2; typ TA = 25 °C, max TA = 85 °Ctyp 9 · max 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz, HCLK = system clock/2; TA = 105 °Cmax 28 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 5 · max 17 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 105 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 3 · max 15 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; TA = 105 °Cmax 22 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; TA = 105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 40 · max 54 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; TA = 105 °Cmax 61 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 31 · max 43 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; TA = 105 °Cmax 50 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 26 · max 38 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; TA = 105 °Cmax 45 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 20 · max 32 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; TA = 105 °Cmax 39 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 14 · max 26 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; TA = 105 °Cmax 33 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 8 · max 20 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; TA = 105 °Cmax 27 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 6 · max 18 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; TA = 105 °Cmax 25 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz, HCLK = system clock/2; typ TA = 25 °C, max TA = 85 °Ctyp 5 · max 16 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz, HCLK = system clock/2; TA = 105 °Cmax 24 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 3 · max 15 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 105 °Cmax 22 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; TA = 105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 2 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 14 mA83
Supply current in Run mode IDDExternal clock, all peripherals disabled; 2 MHz; TA = 105 °Cmax 21 mA83
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 93 · max 109 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 168 MHz; TA = 105 °Cmax 117 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 76 · max 89 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 144 MHz; TA = 105 °Cmax 96 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 67 · max 79 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 120 MHz; TA = 105 °Cmax 86 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 53 · max 65 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 90 MHz; TA = 105 °Cmax 73 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 37 · max 49 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 60 MHz; TA = 105 °Cmax 56 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 20 · max 32 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 30 MHz; TA = 105 °Cmax 39 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 16 · max 27 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 25 MHz; TA = 105 °Cmax 35 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 11 · max 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 105 °Cmax 30 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 6 · max 18 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 105 °Cmax 25 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 4 · max 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 4 MHz; TA = 105 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 3 · max 15 mA84
Supply current in Run mode IDDExternal clock, all peripherals enabled; 2 MHz; TA = 105 °Cmax 22 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 46 · max 61 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 168 MHz; TA = 105 °Cmax 69 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 40 · max 52 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 144 MHz; TA = 105 °Cmax 60 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 37 · max 48 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 120 MHz; TA = 105 °Cmax 56 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 30 · max 42 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 90 MHz; TA = 105 °Cmax 50 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 22 · max 33 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 60 MHz; TA = 105 °Cmax 41 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 12 · max 24 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 30 MHz; TA = 105 °Cmax 31 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 10 · max 21 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 25 MHz; TA = 105 °Cmax 29 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 7 · max 19 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 105 °Cmax 26 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 4 · max 16 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 105 °Cmax 23 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 3 · max 15 mA84
Supply current in Run mode IDDExternal clock, all peripherals disabled; 4 MHz; TA = 105 °Cmax 22 mA84
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 168 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 59 · max 77 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 168 MHz; TA = 105 °Cmax 84 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 144 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 46 · max 61 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 144 MHz; TA = 105 °Cmax 67 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 120 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 38 · max 53 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 120 MHz; TA = 105 °Cmax 60 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 90 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 30 · max 44 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 90 MHz; TA = 105 °Cmax 51 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 60 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 20 · max 34 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 60 MHz; TA = 105 °Cmax 41 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 30 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 11 · max 24 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 30 MHz; TA = 105 °Cmax 31 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 25 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 8 · max 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 25 MHz; TA = 105 °Cmax 28 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 16 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 6 · max 18 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 105 °Cmax 25 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 8 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 3 · max 16 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 105 °Cmax 23 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 4 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 15 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 4 MHz; TA = 105 °Cmax 22 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 2 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 14 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 2 MHz; TA = 105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 168 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 12 · max 27 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 168 MHz; TA = 105 °Cmax 35 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 144 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 9 · max 22 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 144 MHz; TA = 105 °Cmax 29 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 120 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 8 · max 20 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 120 MHz; TA = 105 °Cmax 28 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 90 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 7 · max 19 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 90 MHz; TA = 105 °Cmax 26 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 60 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 5 · max 17 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 60 MHz; TA = 105 °Cmax 24 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 30 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 3 · max 16 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 30 MHz; TA = 105 °Cmax 23 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 25 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 15 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 25 MHz; TA = 105 °Cmax 22 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 16 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 2 · max 14 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 8 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 1 · max 14 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 4 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 1 · max 13 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 4 MHz; TA = 105 °Cmax 21 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 2 MHz; typ TA = 25 °C, max TA = 85 °Ctyp 1 · max 13 mA87
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 2 MHz; TA = 105 °Cmax 21 mA87
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog); TA = 25 °Ctyp 0.4 · max 1.5 mA88
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog); TA = 85 °Cmax 11 mA88
Supply current in Stop mode with main regulator in Run mode IDD_STOPFlash in Deep power down mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog); TA = 105 °Cmax 20 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog); TA = 25 °Ctyp 0.28 · max 1.1 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog); TA = 85 °Cmax 8 mA88
Supply current in Stop mode with main regulator in Low Power mode IDD_STOPFlash in Deep power down mode, low-speed and high-speed internal RC oscillators and high-speed oscillator OFF (no independent watchdog); TA = 105 °Cmax 15 mA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 1.8 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 2.4 Vtyp 3.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 3.3 Vtyp 4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 85 °C, VDD = 3.6 Vmax 20 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, low-speed oscillator and RTC ON; TA = 105 °C, VDD = 3.6 Vmax 36 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 2.4 Vtyp 2.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VDD = 3.3 Vtyp 3.3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 85 °C, VDD = 3.6 Vmax 16 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 105 °C, VDD = 3.6 Vmax 32 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C, VDD = 1.8 Vtyp 2.4 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C, VDD = 2.4 Vtyp 2.6 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 25 °C, VDD = 3.3 Vtyp 3 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 85 °C, VDD = 3.6 Vmax 12.5 uA88
Supply current in Standby mode IDD_STBYBackup SRAM ON, RTC OFF; TA = 105 °C, VDD = 3.6 Vmax 24.8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 1.8 Vtyp 1.7 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 2.4 Vtyp 1.9 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 25 °C, VDD = 3.3 Vtyp 2.2 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 85 °C, VDD = 3.6 Vmax 9.8 uA88
Supply current in Standby mode IDD_STBYBackup SRAM OFF, RTC OFF; TA = 105 °C, VDD = 3.6 Vmax 19.2 uA88
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 1.8 Vtyp 1.29 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 2.4 Vtyp 1.42 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 3.3 Vtyp 1.68 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 85 °C, VBAT = 3.6 Vmax 6 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, low-speed oscillator and RTC ON; TA = 105 °C, VBAT = 3.6 Vmax 11 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 1.8 Vtyp 0.62 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 2.4 Vtyp 0.73 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 25 °C, VBAT = 3.3 Vtyp 0.96 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 85 °C, VBAT = 3.6 Vmax 3 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, low-speed oscillator and RTC ON; TA = 105 °C, VBAT = 3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 1.8 Vtyp 0.79 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 2.4 Vtyp 0.81 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 25 °C, VBAT = 3.3 Vtyp 0.86 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 85 °C, VBAT = 3.6 Vmax 5 uA89
Backup domain supply current IDD_VBATBackup SRAM ON, RTC OFF; TA = 105 °C, VBAT = 3.6 Vmax 10 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 1.8 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 2.4 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 25 °C, VBAT = 3.3 Vtyp 0.1 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 85 °C, VBAT = 3.6 Vmax 2 uA89
Backup domain supply current IDD_VBATBackup SRAM OFF, RTC OFF; TA = 105 °C, VBAT = 3.6 Vmax 4 uA89
GPIO A168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.49 mA93
GPIO A144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.36 mA93
GPIO B168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.45 mA93
GPIO B144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.33 mA93
GPIO C168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.45 mA93
GPIO C144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.34 mA93
GPIO D168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.45 mA93
GPIO D144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.34 mA93
GPIO H168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.45 mA93
GPIO H144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.34 mA93
OTG_HS + ULPI168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 4.57 mA93
OTG_HS + ULPI144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 3.55 mA93
CRC168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.07 mA93
CRC144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.06 mA93
BKPSRAM168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.11 mA93
BKPSRAM144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.08 mA93
DMA1168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 6.15 mA93
DMA1144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 4.75 mA93
DMA2168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 6.24 mA93
DMA2144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 4.8 mA93
OTG_FS168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 4.59 mA93
OTG_FS144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 3.69 mA93
SDIO168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.64 mA95
SDIO144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.54 mA95
TIM1168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 1.47 mA95
TIM1144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 1.14 mA95
TIM8168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 1.58 mA95
TIM8144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 1.22 mA95
TIM9168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.68 mA95
TIM9144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.54 mA95
TIM10168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.45 mA95
TIM10144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.36 mA95
TIM11168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.47 mA95
TIM11144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.38 mA95
ADC1168 MHz; ADON bit set in ADC_CR2 register; VDD = 3.3 V, TA = 25 °Ctyp 2.2 mA95
ADC1144 MHz; ADON bit set in ADC_CR2 register; VDD = 3.3 V, TA = 25 °Ctyp 2.1 mA95
ADC2168 MHz; ADON bit set in ADC_CR2 register; VDD = 3.3 V, TA = 25 °Ctyp 2.04 mA95
ADC2144 MHz; ADON bit set in ADC_CR2 register; VDD = 3.3 V, TA = 25 °Ctyp 1.93 mA95
ADC3168 MHz; ADON bit set in ADC_CR2 register; VDD = 3.3 V, TA = 25 °Ctyp 2.1 mA95
ADC3144 MHz; ADON bit set in ADC_CR2 register; VDD = 3.3 V, TA = 25 °Ctyp 2 mA95
SPI1168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.14 mA95
SPI1144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.12 mA95
USART1168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.34 mA95
USART1144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.27 mA95
USART6168 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.34 mA95
USART6144 MHz; VDD = 3.3 V, TA = 25 °Ctyp 0.28 mA95
Wakeup from Sleep mode tWUSLEEPBased on characterization, not tested in productiontyp 1 us95
Wakeup from Stop mode (regulator in Run mode) tWUSTOP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 13 us95
Wakeup from Stop mode (regulator in low power mode) tWUSTOP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 17 · max 40 us95
Wakeup from Stop mode (regulator in low power mode and Flash memory in Deep power down mode) tWUSTOP16 MHz HSI RC oscillator; based on characterization, not tested in productiontyp 110 us95
Wakeup from Standby mode tWUSTDBY16 MHz HSI RC oscillator; minimum at 105 °C, maximum at –45 °C; based on characterization, not tested in productionmin 260 · typ 375 · max 480 us95
Oscillator frequency fOSC_INBased on characterization, not tested in productionmin 4 · max 26 MHz98
Feedback resistor RFBased on characterization, not tested in productiontyp 200 kΩ98
HSE current consumption IDDVDD = 3.3 V, ESR = 30 Ω, CL = 5 pF @ 25 MHztyp 449 uA98
HSE current consumption IDDVDD = 3.3 V, ESR = 30 Ω, CL = 10 pF @ 25 MHztyp 532 uA98
Oscillator transconductance gmStartupmin 5 mA/V98
Startup time tSU(HSE)VDD is stabilized; measured to stabilized 8 MHz oscillationtyp 2 ms98
Feedback resistor RFtyp 18.4 MΩ99
LSE current consumption IDDmax 1 uA99
Oscillator Transconductance gmmin 2.8 uA/V99
startup time tSU(LSE)VDD is stabilizedtyp 2 s99
Frequency fHSItyp 16 MHz99
Accuracy of the HSI oscillator ACCHSIUser-trimmed with the RCC_CR registermax 1 %99
Accuracy of the HSI oscillator ACCHSIFactory-calibrated; TA = –40 to 105 °Cmin -8 · max 4.5 %99
Accuracy of the HSI oscillator ACCHSIFactory-calibrated; TA = –10 to 85 °Cmin -4 · max 4 %99
Accuracy of the HSI oscillator ACCHSIFactory-calibrated; TA = 25 °Cmin -1 · max 1 %99
HSI oscillator startup time tsu(HSI)typ 2.2 · max 4 us99
HSI oscillator power consumption IDD(HSI)typ 60 · max 80 uA99
PLL input clock fPLL_INmin 0.95 · typ 1 · max 2.1 MHz101
PLL multiplier output clock fPLL_OUTmin 24 · max 168 MHz101
48 MHz PLL multiplier output clock fPLL48_OUTtyp 48 · max 75 MHz101
PLL VCO output fVCO_OUTmin 192 · max 432 MHz101
PLL lock time tLOCKVCO freq = 192 MHzmin 75 · max 200 us101
PLL lock time tLOCKVCO freq = 432 MHzmin 100 · max 300 us101
Cycle-to-cycle jitter JitterSystem clock 120 MHz; RMStyp 25 ps101
Period Jitter JitterSystem clock 120 MHz; RMStyp 15 ps101
Main clock output (MCO) for RMII Ethernet JitterCycle to cycle at 50 MHz on 1000 samplestyp 32 ps101
Main clock output (MCO) for MII Ethernet JitterCycle to cycle at 25 MHz on 1000 samplestyp 40 ps101
Bit Time CAN jitter JitterCycle to cycle at 1 MHz on 1000 samplestyp 330 ps101
PLL power consumption on VDD IDD(PLL)VCO freq = 192 MHzmin 0.15 · max 0.4 mA101
PLL power consumption on VDD IDD(PLL)VCO freq = 432 MHzmin 0.45 · max 0.75 mA101
PLL power consumption on VDDA IDDA(PLL)VCO freq = 192 MHzmin 0.3 · max 0.4 mA101
PLL power consumption on VDDA IDDA(PLL)VCO freq = 432 MHzmin 0.55 · max 0.85 mA101
PLLI2S input clock fPLLI2S_INmin 0.95 · typ 1 · max 2.1 MHz101
PLLI2S multiplier output clock fPLLI2S_OUTmax 216 MHz101
PLLI2S VCO output fVCO_OUTmin 192 · max 432 MHz101
PLLI2S lock time tLOCKVCO freq = 192 MHzmin 75 · max 200 us101
PLLI2S lock time tLOCKVCO freq = 432 MHzmin 100 · max 300 us101
Master I2S clock jitter JitterCycle to cycle at 12.288 MHz on 48KHz period, N=432, R=5; RMS; main PLL runningtyp 90 ps102
Master I2S clock jitter JitterAverage frequency of 12.288 MHz, N = 432, R = 5 on 1000 samples; main PLL runningtyp 90 ps102
WS I2S clock jitter JitterCycle to cycle at 48 KHz on 1000 samples; main PLL runningtyp 400 ps102
PLLI2S power consumption on VDD IDD(PLLI2S)VCO freq = 192 MHzmin 0.15 · max 0.4 mA102
PLLI2S power consumption on VDD IDD(PLLI2S)VCO freq = 432 MHzmin 0.45 · max 0.75 mA102
PLLI2S power consumption on VDDA IDDA(PLLI2S)VCO freq = 192 MHzmin 0.3 · max 0.4 mA102
PLLI2S power consumption on VDDA IDDA(PLLI2S)VCO freq = 432 MHzmin 0.55 · max 0.85 mA102
Modulation frequency fModmax 10 KHz102
Peak modulation depth mdmin 0.25 · max 2 %102
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C conforming to JESD22-A114; Class 2; except VBATmax 2000 V108
Electrostatic discharge voltage (human body model) VESD(HBM)VBAT pin; TA = +25 °C conforming to JESD22-A114max 1000 V108
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C conforming to JESD22-C101; Class IImax 500 V108
Maximum frequency Fmax(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 2.70 Vmax 100 MHz113
Maximum frequency Fmax(IO)outOSPEEDRy[1:0] = 11; CL = 30 pF, VDD > 1.8 Vmax 50 MHz113
Maximum frequency Fmax(IO)outOSPEEDRy[1:0] = 11; CL = 10 pF, VDD > 2.70 Vmax 200 MHz113
Rise time trCL = 50 pFmin 4 · max 20 ns125
Fall time tfCL = 50 pFmin 4 · max 20 ns125
Rise/ fall time matching trfmtr/tfmin 90 · max 110 %125
Output signal crossover voltage VCRSmin 1.3 · max 2 V125
USB OTG HS operating voltage VDDInput levelmin 2.7 · max 3.6 V125
fHCLK value to guarantee proper operation of USB HS interfacemin 30 MHz125
Frequency (first transition) FSTART_8BIT8-bit ±10%; typ column is Nominalmin 54 · typ 60 · max 66 MHz125
Frequency (steady state) ±500 ppm FSTEADYtyp column is Nominalmin 59.97 · typ 60 · max 60.03 MHz125
Duty cycle (first transition) DSTART_8BIT8-bit ±10%; typ column is Nominalmin 40 · typ 50 · max 60 %125
Duty cycle (steady state) ±500 ppm DSTEADYtyp column is Nominalmin 49.975 · typ 50 · max 50.025 %125
Time to reach the steady state frequency and duty cycle after the first transition TSTEADYmax 1.4 ms125
Clock startup time after the de-assertion of SuspendM TSTART_DEVPeripheralmax 5.6 ms125
Ethernet operating voltage VDDInput levelmin 2.7 · max 3.6 V127
MDC cycle time( 2.38 MHz) tMDCmin 411 · typ 420 · max 425 ns127
Write data valid time Td(MDIO)min 6 · typ 10 · max 13 ns127
Read data setup time tsu(MDIO)min 12 ns127
Read data hold time th(MDIO)min 0 ns127
Power supply VDDAmin 1.8 · max 3.6 V129
Positive reference voltage VREF+min 1.8 V129
ADC clock frequency fADCVDDA = 1.8 to 2.4 Vmin 0.6 · typ 15 · max 18 MHz129
ADC clock frequency fADCVDDA = 2.4 to 3.6 Vmin 0.6 · typ 30 · max 36 MHz129
External trigger frequency fTRIGfADC = 30 MHz, 12-bit resolutionmax 1764 kHz129
External trigger frequency fTRIGfADC = 30 MHz, 12-bit resolutionmax 17 1/fADC129
External input impedance RAINSee Equation 1 for detailsmax 50 κΩ129
Sampling switch resistance RADCmax 6 κΩ129
Internal sample and hold capacitor CADCtyp 4 pF129
Injection trigger conversion latency tlatfADC = 30 MHzmax 0.1 us129
Injection trigger conversion latency tlatFor external triggers, add a delay of 1/fPCLK2max 3 1/fADC129
Regular trigger conversion latency tlatrfADC = 30 MHzmax 0.067 us129
Regular trigger conversion latency tlatrFor external triggers, add a delay of 1/fPCLK2max 2 1/fADC129
Sampling time tSfADC = 30 MHzmin 0.1 · max 16 us129
Sampling time tSmin 3 · max 480 1/fADC129
Power-up time tSTABtyp 2 · max 3 us129
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 12-bit resolutionmin 0.5 · max 16.4 us130
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 10-bit resolutionmin 0.43 · max 16.34 us130
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 8-bit resolutionmin 0.37 · max 16.27 us130
Total conversion time (including sampling time) tCONVfADC = 30 MHz; 6-bit resolutionmin 0.3 · max 16.2 us130
Total conversion time (including sampling time) tCONVtS for sampling + n-bit resolution for successive approximationmin 9 · max 492 1/fADC130
Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS12-bit resolution; Single ADCmax 2 Msps130
Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS12-bit resolution; Interleave Dual ADC modemax 3.75 Msps130
Sampling rate (fADC = 30 MHz, and tS = 3 ADC cycles) fS12-bit resolution; Interleave Triple ADC modemax 6 Msps130
ADC VREF DC current consumption in conversion mode IVREF+typ 300 · max 500 uA130
ADC VDDA DC current consumption in conversion mode IVDDAtyp 1.6 · max 1.8 mA130
Internal reference voltage VREFINT–40 °C < TA < +105 °Cmin 1.18 · typ 1.21 · max 1.24 V135
ADC sampling time when reading the internal reference voltage TS_vrefintmin 10 us135
Internal reference voltage spread over the temperature range VRERINT_sVDD = 3 Vtyp 3 · max 5 mV135
Temperature coefficient TCoefftyp 30 · max 50 ppm/°C135
Startup time tSTARTtyp 6 · max 10 us135
Analog supply voltage VDDAmin 1.8 · max 3.6 V135
Reference supply voltage VREF+VREF+ ≤ VDDAmin 1.8 · max 3.6 V135
Ground VSSAmin 0 · max 0 V135
Resistive load with buffer ON RLOADmin 5 kΩ135
Impedance output with buffer OFF ROWhen the buffer is OFF, the Minimum resistive load between DAC_OUT and VSS to have a 1% accuracy is 1.5 MΩmax 15 kΩ135
Capacitive load CLOADMaximum capacitive load at DAC_OUT pin when the buffer is ONmax 50 pF135
Lower DAC_OUT voltage with buffer ON DAC_OUT minmin 0.2 V135
Lower DAC_OUT voltage with buffer OFF DAC_OUT mintyp 0.5 mV136
DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+With no load, worst code (0x800) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 170 · max 240 uA136
DAC DC VREF current consumption in quiescent mode (Standby mode) IVREF+With no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 50 · max 75 uA136
DAC DC VDDA current consumption in quiescent mode IDDAWith no load, middle code (0x800) on the inputstyp 280 · max 380 uA136
DAC DC VDDA current consumption in quiescent mode IDDAWith no load, worst code (0xF1C) at VREF+ = 3.6 V in terms of DC consumption on the inputstyp 475 · max 625 uA136
Settling time (full scale: for a 10-bit input code transition between the lowest and the highest input codes when DAC_OUT reaches final value ±4LSB tSETTLINGCLOAD ≤ 50 pF, RLOAD ≥ 5 kΩtyp 3 · max 6 us136
Thermal resistance junction-ambient ΘJALQFP64 - 10 × 10 mm / 0.5 mm pitch; table provides Valuetyp 46 °C/W169

Pins, by the datasheet

2
63 VSS
Ground supply. · p. 57
64 VDD
Main power supply. · p. 57

Open-source boards using it

170See all 170
  • 2 layers59.1 × 99.9 mmCheap FOCer 2 60mm, the printed circuit board in 3D

    Cheap FOCer 2 60mm

    shamansystems/Cheap-FOCer-2

    Low-Cost Motor Controller based on the VESC 6

    193 parts407
  • 4 layers55 × 55 mmRBoard, the printed circuit board in 3D

    RBoard

    pms67/LittleBrain-STM32F4-Sensorboard

    STM32F4-based PCB interfacing with a variety of sensors.

    90 parts339
  • 4 layers75.2 × 99.5 mmFOC, the printed circuit board in 3D

    FOC

    nordstream3/FOC

    Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…

    261 parts81
  • 2 layers99.6 × 100 mmPCB Fujitora, the printed circuit board in 3D

    PCB Fujitora

    OPRobots/FujitoraBot

    Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4

    118 parts68GPL-3.0
  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 2 layers53.3 × 22.9 mmBluePillF4, the printed circuit board in 3D

    BluePillF4

    rogerclarkmelbourne/STM32_Pill_Boards

    Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board

    198 parts51
  • 4 layers202 × 125 mmM17-rru rf, the printed circuit board in 3D

    M17-rru rf

    M17-Project/rru-rf-hw

    Remote Radio Unit - RF board

    241 parts47
  • 4 layers50 × 65 mmFeroFlyF405, the printed circuit board in 3D

    FeroFlyF405

    Ozonised/FeroFlyF405

    FeroFlyF405 an open source STM32F405 based flight controller running INAV

    150 parts44CERN-OHL-P-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F405RGT6?

Yes. The symbol is MCU_ST_STM32F4:STM32F405RGTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F405RGT6?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the STM32F405RGT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F405RGT6?

JLCPCB lists it as part C15742, with 900 in stock; the sellers' links on this page open their listings.

What can replace the STM32F405RGT6?

Parts like it in the library: the AT32F403ARCT7 by ARTERY, the STM32G474RBT3 by STMicroelectronics, the AT32F403ARGT7 by ARTERY and the HC32F460KCTA-LQFP64 by XHSC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F405RGT6?

170 boards in 141 repositories on GitHub; the most starred are listed on this page, with their KiCad files.