
Airbrake
hoffmatic/SD-2-EKF
This folder contains the live KiCad project files and local component libraries:
STMicroelectronicsExtended
-40℃~+85℃ 1.71V~3.6V 1MB 250MHz 32 Bit 49 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32H562RGT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.71V~3.6V 1MB 250MHz 32 Bit 49 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32H5:STM32H562RGTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 1,136 are in stock at JLCPCB (part C19711662). 4 open-source boards in 2 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDSMPS, VDDA, VDDUSB, VDDIO2, VBAT, and VREF+) VDDx - VSS | Absolute maximum ratings | min -0.3 · max 4 V | 124 |
| I/O supply when HSLV = 0 VDDIOx - VSS | Absolute maximum ratings; VDDIO1 = VDD | min -0.3 · max 4 V | 124 |
| I/O supply when HSLV = 1 VDDIOx - VSS | Absolute maximum ratings; VDDIO1 = VDD | min -0.3 · max 2.75 V | 124 |
| Input voltage on TT_xx pins VIN | Absolute maximum ratings; minimum VSS - 0.3 | max 4 V | 124 |
| Input voltage on FT_c pins VIN | Absolute maximum ratings; minimum VSS - 0.3 | max 5.5 V | 124 |
| Input voltage on any other pins VIN | Absolute maximum ratings; minimum VSS - 0.3 | max 4 V | 124 |
| Allowed voltage difference for VREF+ > VDDA VREF+-VDDA | Absolute maximum ratings | max 0.4 V | 124 |
| Variations between different VDDX power pins of the same domain |∆VDDx| | Absolute maximum ratings | max 50 mV | 124 |
| Variations between all the different ground pins |VSSx-VSS| | Absolute maximum ratings | max 50 mV | 124 |
| Total current into sum of all VDD power lines (source) ∑IVDD | Absolute maximum ratings | max 350 mA | 125 |
| Total current out of sum of all VSS ground lines (sink) ∑IVSS | Absolute maximum ratings | max 350 mA | 125 |
| Maximum current into each VDD power pin (source) IVDD | Absolute maximum ratings | max 100 mA | 125 |
| Maximum current out of each VSS ground pin (sink) IVSS | Absolute maximum ratings | max 100 mA | 125 |
| Output current sunk/sourced by any I/O and control pin IIO(PIN) | Absolute maximum ratings | max 20 mA | 125 |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | Absolute maximum ratings | max 140 mA | 125 |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | Absolute maximum ratings | max 140 mA | 125 |
| Injected current on FT_xxx, TT_xx, NRST pins IINJ(PIN) | Absolute maximum ratings; negative / positive limits | min -5 · max 0 mA | 125 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | Absolute maximum ratings; absolute sum of negative injected currents | max 25 mA | 125 |
| Storage temperature range TSTG | min -65 · max 150 °C | 125 | |
| Maximum junction temperature TJ | Limited to 105 °C in VOS0 | max 130 °C | 125 |
| Standard operating voltage VDD | HSLV = 0 | min 1.71 · max 3.6 V | 125 |
| Standard operating voltage VDD | HSLV = 1 | max 2.7 V | 125 |
| PB8, PB9, PD6, PD7, PG[9:14] I/Os supply voltage VDDIO2 | At least one listed I/O used; HSLV = 0 | min 1.08 · max 3.6 V | 126 |
| PB8, PB9, PD6, PD7, PG[9:14] I/Os supply voltage VDDIO2 | At least one listed I/O used; HSLV = 1 | min 1.08 · max 2.7 V | 126 |
| PB8, PB9, PD6, PD7, PG[9:14] I/Os supply voltage VDDIO2 | Listed I/Os not used | min 0 · max 3.6 V | 126 |
| USB supply voltage VDDUSB | USB is used | min 3 · max 3.6 V | 126 |
| USB supply voltage VDDUSB | USB is not used | min 0 · max 3.6 V | 126 |
| Analog supply voltage VDDA | ADC is used; shared maximum 3.6 V stated separately | min 1.62 V | 126 |
| Analog supply voltage VDDA | DAC is used; shared maximum 3.6 V stated separately | min 1.8 V | 126 |
| Analog supply voltage VDDA | VREFBUF is used; shared maximum 3.6 V stated separately | min 2.1 V | 126 |
| Analog supply voltage VDDA | ADC, DAC, and VREFBUF are not used; shared maximum 3.6 V stated separately | min 0 V | 126 |
| Analog supply voltage VDDA | Shared maximum for all listed analog operating conditions | max 3.6 V | 126 |
| Backup domain supply voltage VBAT | min 1.2 · max 3.6 V | 126 | |
| I/O input voltage VIN | FT_c I/O | min -0.3 · max 5 V | 126 |
| Internal regulator ON VCORE | VOS0; maximum AHB and APB frequency 250 MHz | min 1.3 · typ 1.35 · max 1.4 V | 127 |
| Internal regulator ON VCORE | VOS1; maximum AHB and APB frequency 200 MHz | min 1.15 · typ 1.2 · max 1.26 V | 127 |
| Internal regulator ON VCORE | VOS2; maximum AHB and APB frequency 150 MHz | min 1.05 · typ 1.1 · max 1.15 V | 127 |
| Internal regulator ON VCORE | VOS3; maximum AHB and APB frequency 100 MHz | min 0.95 · typ 1 · max 1.05 V | 127 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS0 | min 1.32 · typ 1.35 · max 1.4 V | 127 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS1 | min 1.17 · typ 1.2 · max 1.26 V | 127 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS2 | min 1.07 · typ 1.1 · max 1.15 V | 127 |
| Regulator OFF: external VCORE voltage must be supplied from external regulator on VCAP pins VCORE | VOS3 | min 0.97 · typ 1 · max 1.05 V | 127 |
| Stop mode VCORE | SVOS3 | typ 1 V | 127 |
| Stop mode VCORE | SVOS4 | typ 0.9 V | 127 |
| Stop mode VCORE | SVOS5 | typ 0.74 V | 127 |
| AHB clock frequency fHCLK | VOS0 | max 250 MHz | 127 |
| AHB clock frequency fHCLK | VOS1 | max 200 MHz | 127 |
| AHB clock frequency fHCLK | VOS2 | max 150 MHz | 127 |
| AHB clock frequency fHCLK | VOS3 | max 100 MHz | 127 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS0 | max 250 MHz | 127 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS1 | max 200 MHz | 127 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS2 | max 150 MHz | 127 |
| APB1, APB2, APB3 clock frequency fPCLKx (x=1,2,3) | VOS3 | max 100 MHz | 127 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 128 |
| Ambient temperature for the suffix 6 version TA | In LDO bypass mode | min -40 · max 125 °C | 128 |
| Junction temperature range TJ | VOS0 | min -40 · max 105 °C | 128 |
| Junction temperature range TJ | VOS1, VOS2, and VOS3 | min -40 · max 130 °C | 128 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | Packages without SMPS; TA = 25 °C; ANSI/ESDA/JEDEC JS-001; class 2 | max 2000 V | 159 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All packages; TA = 25 °C; ANSI/ESDA/JEDEC JS-002; class C2a | max 500 V | 159 |
| Thermal resistance junction-ambient ΘJA | LQFP64 (10 x 10 mm) | typ 48.1 °C/W | 264 |
| Thermal resistance junction-board ΘJB | LQFP64 (10 x 10 mm) | typ 24.1 °C/W | 264 |
| Capacitance of external capacitor on VDDSMPS pins Cin | typ 4.7 uF | 130 | |
| ESR of external capacitor Cin | 2.4 MHz | max 10 mΩ | 130 |
| Capacitance of external capacitor on VLXSMPS pin Cfilt | typ 220 pF | 130 | |
| Capacitance of external capacitor on VCAP pin COUT | typ 10 uF | 130 | |
| ESR of external capacitor COUT | 2.4 MHz | max 20 mΩ | 130 |
| Inductance of external inductor on VLXSMPS pin L | typ 2.2 uH | 130 | |
| Series DC resistance L | All packages | max 150 mΩ | 130 |
| DC current at which the inductance drops 30% from the value without current ISAT | min 1 A | 130 | |
| Average current for which the temperature of the inductor is raised 40 °C by the DC current IRMS | min 1 A | 130 | |
| Internal reference voltage VREFINT | -40 °C < TJ < +130 °C | min 1.18 · typ 1.216 · max 1.255 V | 135 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | min 4.3 us | 135 | |
| VBAT sampling time when reading the internal VBAT voltage tS_vbat | min 9 us | 135 | |
| Start time of reference voltage buffer when the ADC is enabled tstart_vrefint | max 4.4 us | 135 | |
| Reference buffer consumption for ADC Irefbuf | VDD = 3.3 V | min 9 · typ 13.5 · max 23 uA | 135 |
| Internal reference voltage spread over the temperature range ∆VREFINT | -40 °C < TJ < +130 °C | typ 5 · max 15 mV | 135 |
| Average temperature coefficient TCoeff | Average temperature coefficient | typ 20 · max 70 ppm/°C | 135 |
| Average voltage coefficient VDDcoeff | 3.0 V < VDD < 3.6 V | typ 10 · max 1370 ppm/V | 135 |
| 1/4 reference voltage VREFINT_DIV1 | typ 25 %VREFINT | 135 | |
| 1/2 reference voltage VREFINT_DIV2 | typ 50 %VREFINT | 135 | |
| 3/4 reference voltage VREFINT_DIV3 | typ 75 %VREFINT | 135 | |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; maximum at TJ = 25 °C | typ 32.1 · max 37 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; SMPS | typ 17.5 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; TJ = 85 °C | max 65 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; TJ = 105 °C | max 87 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 215 MHz; LDO; maximum at TJ = 25 °C | typ 27.9 · max 32 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 25.7 · max 30 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 22.1 · max 25 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 180 MHz; LDO; maximum at TJ = 25 °C | typ 20.3 · max 23 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 168 MHz; LDO; maximum at TJ = 25 °C | typ 18.8 · max 21 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 16.9 · max 20 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 15.4 · max 17 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 10.8 · max 13 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 9.8 · max 11 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 60 MHz; LDO; maximum at TJ = 25 °C | typ 6.4 · max 8 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 25 MHz; LDO; maximum at TJ = 25 °C | typ 3.2 · max 5 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS0, fHCLK = 250 MHz; LDO; maximum at TJ = 25 °C | typ 86.8 · max 90 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS0, fHCLK = 250 MHz; SMPS | typ 49.8 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS0, fHCLK = 250 MHz; LDO; TJ = 85 °C | max 118 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS0, fHCLK = 250 MHz; LDO; TJ = 105 °C | max 140 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS0, fHCLK = 215 MHz; LDO; maximum at TJ = 25 °C | typ 75 · max 78 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS0, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 69.5 · max 72 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS1, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 60.7 · max 62 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS1, fHCLK = 180 MHz; LDO; maximum at TJ = 25 °C | typ 55.1 · max 56 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS1, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 45.8 · max 47 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS2, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 41.9 · max 43 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS2, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 28.5 · max 30 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS3, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 25.9 · max 27 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS3, fHCLK = 60 MHz; LDO; maximum at TJ = 25 °C | typ 16.2 · max 17 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals enabled, VOS3, fHCLK = 25 MHz; LDO; maximum at TJ = 25 °C | typ 7.5 · max 9 mA | 136 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; maximum at TJ = 25 °C | typ 29.2 · max 34 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 23.3 · max 28 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 20.1 · max 23 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 180 MHz; LDO; maximum at TJ = 25 °C | typ 18.5 · max 21 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 15.4 · max 18 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 14 · max 16 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 9.8 · max 12 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 8.9 · max 10 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 25 MHz; LDO; maximum at TJ = 25 °C | typ 3 · max 4 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; maximum at TJ = 25 °C | typ 27.8 · max 32 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 215 MHz; LDO; maximum at TJ = 25 °C | typ 24.1 · max 29 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 22.1 · max 27 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 19.1 · max 22 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 180 MHz; LDO; maximum at TJ = 25 °C | typ 17.6 · max 20 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 14.6 · max 22 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 13.3 · max 17 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 9.4 · max 11 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 8.5 · max 10 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 60 MHz; LDO; maximum at TJ = 25 °C | typ 5.6 · max 7 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 25 MHz; LDO; maximum at TJ = 25 °C | typ 2.9 · max 4 mA | 137 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; maximum at TJ = 25 °C | typ 30.8 · max 35 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 215 MHz; LDO; maximum at TJ = 25 °C | typ 26.7 · max 31 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS0, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 24.6 · max 29 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 21.2 · max 24 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 180 MHz; LDO; maximum at TJ = 25 °C | typ 19.5 · max 22 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 168 MHz; LDO; maximum at TJ = 25 °C | typ 18 · max 21 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS1, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 16.2 · max 19 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 14.8 · max 17 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS2, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 10.3 · max 12 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 9.4 · max 11 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 60 MHz; LDO; maximum at TJ = 25 °C | typ 6.1 · max 8 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, VOS3, fHCLK = 25 MHz; LDO; maximum at TJ = 25 °C | typ 3.2 · max 5 mA | 138 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 250 MHz, LDO | typ 32.1 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 200 MHz, LDO | typ 22.1 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 168 MHz, LDO | typ 18.8 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 150 MHz, LDO | typ 15.4 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 100 MHz, LDO | typ 9.8 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 250 MHz, LDO | typ 29.2 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 200 MHz, LDO | typ 20.1 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 150 MHz, LDO | typ 14 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 100 MHz, LDO | typ 8.9 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 2-way, fHCLK = 200 MHz, LDO | typ 21.2 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 2-way, fHCLK = 168 MHz, LDO | typ 18 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 2-way, fHCLK = 100 MHz, LDO | typ 9.4 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 1-way, fHCLK = 250 MHz, LDO | typ 27.8 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 1-way, fHCLK = 200 MHz, LDO | typ 19.1 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 1-way, fHCLK = 150 MHz, LDO | typ 13.3 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, SRAM, instruction cache 1-way, fHCLK = 100 MHz, LDO | typ 8.5 mA | 139 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 250 MHz, LDO | typ 34.1 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 180 MHz, LDO | typ 21.8 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 168 MHz, LDO | typ 20.1 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 150 MHz, LDO | typ 24.9 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 2-way, prefetch ON, fHCLK = 100 MHz, LDO | typ 10.6 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 250 MHz, LDO | typ 31.3 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 180 MHz, LDO | typ 20.1 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 168 MHz, LDO | typ 18.5 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 150 MHz, LDO | typ 18.8 mA | 140 |
| Supply current in Run mode IDD(Run) | All peripherals disabled, FLASH, instruction cache 1-way, prefetch ON, fHCLK = 100 MHz, LDO | typ 9.8 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS0, fHCLK = 250 MHz; LDO; maximum at TJ = 25 °C | typ 7.3 · max 12 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS0, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 5.8 · max 10 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS1, fHCLK = 200 MHz; LDO; maximum at TJ = 25 °C | typ 4.8 · max 8 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS1, fHCLK = 180 MHz; LDO; maximum at TJ = 25 °C | typ 4.8 · max 8 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS1, fHCLK = 168 MHz; LDO; maximum at TJ = 25 °C | typ 4.3 · max 7 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS1, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 3.9 · max 7 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS2, fHCLK = 150 MHz; LDO; maximum at TJ = 25 °C | typ 3.5 · max 6 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS2, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 2.8 · max 5 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS3, fHCLK = 100 MHz; LDO; maximum at TJ = 25 °C | typ 2.5 · max 4 mA | 140 |
| Supply current in sleep mode IDD(sleep) | All peripherals disabled, VOS3, fHCLK = 60 MHz; LDO; maximum at TJ = 25 °C | typ 2 · max 4 mA | 140 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs ON, SVOS3; LDO; maximum at TJ = 25 °C | typ 0.37 · max 2 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs ON, SVOS4; LDO; maximum at TJ = 25 °C | typ 0.27 · max 1.4 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs ON, SVOS5; LDO; maximum at TJ = 25 °C | typ 0.19 · max 0.86 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in normal mode, SRAMs ON, SVOS3; LDO; maximum at TJ = 25 °C | typ 0.38 · max 2.02 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in normal mode, SRAMs ON, SVOS4; LDO; maximum at TJ = 25 °C | typ 0.29 · max 1.42 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs OFF except SRAM2 16 Kbytes ON, SVOS3; LDO; maximum at TJ = 25 °C | typ 0.34 · max 1.93 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs OFF except SRAM2 16 Kbytes ON, SVOS4; LDO; maximum at TJ = 25 °C | typ 0.25 · max 1.35 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs OFF except SRAM2 16 Kbytes ON, SVOS5; LDO; maximum at TJ = 25 °C | typ 0.17 · max 0.81 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs OFF except SRAM2 ON, SVOS3; LDO; maximum at TJ = 25 °C | typ 0.35 · max 1.95 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs OFF except SRAM2 ON, SVOS4; LDO; maximum at TJ = 25 °C | typ 0.26 · max 1.36 mA | 141 |
| Supply current in Stop IDD(stop) | Flash memory in low power mode, SRAMs OFF except SRAM2 ON, SVOS5; LDO; maximum at TJ = 25 °C | typ 0.17 · max 0.82 mA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF, RTC and LSE OFF; typical at 1.8 V; maximum at TJ = 25 °C | typ 2.58 · max 5.9 uA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF, RTC and LSE OFF; 2.4 V | typ 2.78 uA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF, RTC and LSE OFF; 3 V | typ 3.01 uA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF, RTC and LSE OFF; 3.3 V | typ 3.19 uA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON, RTC and LSE OFF; typical at 1.8 V; maximum at TJ = 25 °C | typ 3.79 · max 8.2 uA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM OFF, RTC and LSE ON; typical at 1.8 V; maximum at TJ = 25 °C | typ 2.91 · max 6.9 uA | 141 |
| Supply current in standby mode, IWDG OFF IDD(standby) | Backup RAM ON, RTC and LSE ON; typical at 1.8 V; maximum at TJ = 25 °C | typ 4.16 · max 9.2 uA | 141 |
| Supply current in VBAT mode IDD(VBAT) | Backup RAM OFF, RTC and LSE OFF; typical at 1.8 V; maximum at TJ = 25 °C | typ 0.01 · max 0.2 uA | 142 |
| Supply current in VBAT mode IDD(VBAT) | Backup RAM ON, RTC and LSE OFF; typical at 1.8 V; maximum at TJ = 25 °C | typ 1.11 · max 4.5 uA | 142 |
| Supply current in VBAT mode IDD(VBAT) | Backup RAM OFF, RTC and LSE ON; typical at 1.8 V; maximum at TJ = 25 °C | typ 0.45 · max 1.2 uA | 142 |
| Supply current in VBAT mode IDD(VBAT) | Backup RAM ON, RTC and LSE ON; typical at 1.8 V; maximum at TJ = 25 °C | typ 1.56 · max 5.5 uA | 142 |
| SRAM1 IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.9 uA/MHz | 143 |
| SRAM1 IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.85 uA/MHz | 143 |
| SRAM1 IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.78 uA/MHz | 143 |
| SRAM1 IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.7 uA/MHz | 143 |
| BKPRAM IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.95 uA/MHz | 143 |
| BKPRAM IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.89 uA/MHz | 143 |
| BKPRAM IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.82 uA/MHz | 143 |
| BKPRAM IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.74 uA/MHz | 143 |
| CORDIC IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.5 uA/MHz | 143 |
| CORDIC IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.45 uA/MHz | 143 |
| CORDIC IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.42 uA/MHz | 143 |
| CORDIC IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.4 uA/MHz | 143 |
| CRC IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.22 uA/MHz | 143 |
| CRC IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.21 uA/MHz | 143 |
| CRC IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.18 uA/MHz | 143 |
| CRC IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.18 uA/MHz | 143 |
| DCACHE IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.66 uA/MHz | 143 |
| DCACHE IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.59 uA/MHz | 143 |
| DCACHE IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.55 uA/MHz | 143 |
| DCACHE IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.51 uA/MHz | 143 |
| ETH IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 11.33 uA/MHz | 143 |
| ETH IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 10 uA/MHz | 143 |
| ETH IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 9.13 uA/MHz | 143 |
| ETH IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 8.32 uA/MHz | 143 |
| FLASH IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 10.19 uA/MHz | 143 |
| FLASH IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 8.87 uA/MHz | 143 |
| FLASH IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 8.09 uA/MHz | 143 |
| FLASH IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 7.35 uA/MHz | 143 |
| FMAC IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 2.07 uA/MHz | 143 |
| FMAC IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 1.84 uA/MHz | 143 |
| FMAC IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 1.68 uA/MHz | 143 |
| FMAC IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 1.56 uA/MHz | 143 |
| GPDMA1 IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.62 uA/MHz | 143 |
| GPDMA1 IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.55 uA/MHz | 143 |
| GPDMA1 IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.51 uA/MHz | 143 |
| GPDMA1 IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.45 uA/MHz | 143 |
| GPDMA2 IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.45 uA/MHz | 143 |
| GPDMA2 IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.43 uA/MHz | 143 |
| GPDMA2 IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.38 uA/MHz | 143 |
| GPDMA2 IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.35 uA/MHz | 143 |
| GTZC1 IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 1.19 uA/MHz | 143 |
| GTZC1 IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 1.05 uA/MHz | 143 |
| GTZC1 IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.97 uA/MHz | 143 |
| GTZC1 IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.9 uA/MHz | 143 |
| ICACHE IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.86 uA/MHz | 143 |
| ICACHE IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.81 uA/MHz | 143 |
| ICACHE IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.75 uA/MHz | 143 |
| ICACHE IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.67 uA/MHz | 143 |
| RAMCFG IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 0.88 uA/MHz | 143 |
| RAMCFG IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.79 uA/MHz | 143 |
| RAMCFG IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.71 uA/MHz | 143 |
| RAMCFG IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.67 uA/MHz | 143 |
| AHB1 IDD | AHB1, VOS0, 25 °C, VDD = 3.0 V | typ 1.09 uA/MHz | 143 |
| AHB1 IDD | AHB1, VOS1, 25 °C, VDD = 3.0 V | typ 0.94 uA/MHz | 143 |
| AHB1 IDD | AHB1, VOS2, 25 °C, VDD = 3.0 V | typ 0.86 uA/MHz | 143 |
| AHB1 IDD | AHB1, VOS3, 25 °C, VDD = 3.0 V | typ 0.79 uA/MHz | 143 |
| Oscillator frequency F | min 4 · max 50 MHz | 150 | |
| Feedback resistor RF | typ 200 kΩ | 150 | |
| HSE current consumption IDD(HSE) | During startup | max 10 mA | 150 |
| HSE current consumption IDD(HSE) | VDD = 3 V, Rm = 20 Ω, CL = 10 pF at 4 MHz | typ 0.44 mA | 150 |
| HSE current consumption IDD(HSE) | VDD = 3 V, Rm = 20 Ω, CL = 10 pF at 8 MHz | typ 0.44 mA | 150 |
| HSE current consumption IDD(HSE) | VDD = 3 V, Rm = 20 Ω, CL = 10 pF at 16 MHz | typ 0.55 mA | 150 |
| HSE current consumption IDD(HSE) | VDD = 3 V, Rm = 20 Ω, CL = 10 pF at 32 MHz | typ 0.67 mA | 150 |
| HSE current consumption IDD(HSE) | VDD = 3 V, Rm = 20 Ω, CL = 10 pF at 48 MHz | typ 1.17 mA | 150 |
| Maximum critical crystal gm Gmcritmax | Startup | max 1.5 mA/V | 150 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 150 |
| Oscillator frequency F | typ 32.768 kHz | 151 | |
| LSE current consumption IDD | LSEDRV[1:0] = 00, Low drive capability | typ 246 nA | 151 |
| LSE current consumption IDD | LSEDRV[1:0] = 01, Medium low drive capability | typ 333 nA | 151 |
| LSE current consumption IDD | LSEDRV[1:0] = 10, Medium high drive capability | typ 462 nA | 151 |
| LSE current consumption IDD | LSEDRV[1:0] = 11, High drive capability | typ 747 nA | 151 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 00, Low drive capability | max 0.5 uA/V | 151 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 01, Medium low drive capability | max 0.75 uA/V | 151 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 10, Medium high drive capability | max 1.7 uA/V | 151 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 11, High drive capability | max 2.7 uA/V | 151 |
| Startup time tSU(LSE) | VDD is stabilized | typ 2 s | 151 |
| Frequency drift with VDD (reference is 3.3 V) ∆VDD(HSI) | VDD= 1.71 to 3.6 V | min -0.12 · max 0.03 % | 153 |
| Frequency drift with VDD (reference is 64 MHz) ∆TEMP(HSI) | TJ= -20 to 105 °C | min -1 · max 1 % | 153 |
| Frequency drift with VDD (reference is 64 MHz) ∆TEMP(HSI) | TJ= -40 to 130 °C | min -2 · max 1 % | 153 |
| Start-up time tsu(HSI) | typ 1.4 · max 2 us | 153 | |
| Stabilization time tstab(HSI) | At 1% of target frequency | typ 4 · max 8 us | 153 |
| Stabilization time tstab(HSI) | At 1% of target frequency | max 4 us | 153 |
| Power consumption IDD(HSI) | typ 300 · max 450 uA | 153 | |
| Frequency fCSI | VDD = 3.3 V, TJ = 30 °C | min 3.96 · typ 4 · max 4.04 MHz | 153 |
| User trimming step TRIM | Trimming is not a multiple of 16 | typ 0.4 · max 0.75 % | 153 |
| User trimming step TRIM | Trimming is not a multiple of 32 | min -4.75 · typ -2.75 · max 0.75 % | 153 |
| User trimming step TRIM | Other trimmings are a multiple of 32 (not including multiples of 64 and 128) | min -0.43 · typ 0 · max 0.75 % | 153 |
| Duty cycle DuCy(CSI) | min 45 · max 55 % | 153 | |
| Frequency drift over temperature ∆TEMP(CSI) | TJ= 0 to 85 °C | min -3.7 · max 4.5 % | 153 |
| Frequency drift over temperature ∆TEMP(CSI) | TJ= -40 to TJ = 130 °C | min -11 · max 7.5 % | 153 |
| Frequency drift over VDD ∆VDD(CSI) | VDD= 1.71 to 3.6 V | min -0.06 · max 0.06 % | 153 |
| Start-up time tsu(CSI) | typ 1 · max 2 us | 153 | |
| Stabilization time (to reach ± 3% of fCSI) tstab(CSI) | max 4 cycle | 153 | |
| Power consumption IDD(CSI) | typ 23 · max 30 uA | 153 | |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 150 MHz | typ 60 ±ps | 156 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 200 MHz | typ 40 ±ps | 156 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 400 MHz | typ 18 ±ps | 156 |
| Cycle-to-cycle jitter Jitter | fVCO_OUT = 420 MHz | typ 15 ±ps | 156 |
| Period jitter Jitter | fVCO_OUT = 150 MHz, fPLL_OUT = 50 MHz | typ 75 ±ps | 156 |
| Period jitter Jitter | fVCO_OUT = 400 MHz, fPLL_OUT = 50 MHz | typ 25 ±ps | 156 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 420 MHz, VDD | typ 275 · max 360 uA | 156 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 420 MHz, VCORE | typ 450 uA | 156 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 150 MHz, VDD | typ 160 · max 240 uA | 156 |
| PLL power consumption on VDD IDD(PLL) | fVCO_OUT = 150 MHz, VCORE | typ 165 uA | 156 |
| Supply current IDD | Word program; TJ = -40 to 130 °C | typ 2.5 · max 3.6 mA | 156 |
| Supply current IDD | Sector erase; TJ = -40 to 130 °C | typ 1.8 · max 4 mA | 156 |
| Supply current IDD | Mass erase; TJ = -40 to 130 °C | typ 2 · max 4 mA | 156 |
| Word program time tprog | 128 bits (user area) | typ 31 · max 100 us | 156 |
| Word program time tprog | 16 bits (OTP area) | typ 31 · max 100 us | 156 |
| Sector erase time (8 Kbytes) tERASE | typ 2 · max 10 ms | 156 | |
| Mass erase time tME | typ 0.512 · max 2.6 s | 156 | |
| Bank erase time tBE | typ 0.256 · max 1.3 s | 156 | |
| Programming voltage Vprog | min 1.71 · max 3.6 V | 156 | |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All packages; TA = 25 °C, conforming to ANSI/ESDA/JEDEC JS-002; class C2a | max 500 V | 159 |
| Output low level voltage VOL | CMOS port, IIO = 8 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | TTL port, IIO = 8 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output high level voltage VOH | TTL port, IIO = -8 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 163 |
| Output low level voltage VOL | IIO = 20 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 1.3 V | 163 |
| Output low level voltage VOL | IIO = 4 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage for an FTf I/O pin in (FT I/O with “f” option) VOLFM+ | IIO = 20 mA; 2.3 V≤ VDD ≤3.6 V | max 0.4 V | 163 |
| Output low level voltage for an FTf I/O pin in (FT I/O with “f” option) VOLFM+ | IIO = 10 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage for an FTf I/O pin in (FT I/O with “f” option) VOLFM+ | IIO = 4.5 mA; 1.08 V ≤ VDD ≤ 3.6 V | max 0.4 V | 163 |
| Output low level voltage VOL | CMOS port, IIO = 2 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output low level voltage VOL | TTL port, IIO = 2 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output high level voltage VOH | TTL port, IIO = -2 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 164 |
| Output low level voltage VOL | IIO = 1 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output low level voltage VOL | IIO = 0.1 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output low level voltage VOL | CMOS port, IIO = 3 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output low level voltage VOL | TTL port, IIO = 3 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output high level voltage VOH | TTL port, IIO = -3 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 164 |
| Output low level voltage VOL | IIO = 1.5 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 164 |
| Output low level voltage VOL | CMOS port, IIO = 0.5 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Output low level voltage VOL | TTL port, IIO = 0.5 mA; 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Output high level voltage VOH | TTL port, IIO = -0.5 mA; 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 165 |
| Output low level voltage VOL | IIO = 0.25 mA; 1.71 V ≤ VDD ≤ 3.6 V | max 0.4 V | 165 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V | max 8 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V | max 10 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V | max 12 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V | max 14 MHz | 170 |
| Maximum frequency Fmax | Speed 00; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V | max 16 MHz | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V | max 17.8 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V | max 15.8 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V | max 14.4 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V | max 13.1 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V | max 11.4 ns | 170 |
| Maximum frequency Fmax | Speed 01; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V | max 40 MHz | 170 |
| Maximum frequency Fmax | Speed 01; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V | max 45 MHz | 170 |
| Maximum frequency Fmax | Speed 01; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V | max 50 MHz | 170 |
| Maximum frequency Fmax | Speed 01; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V | max 55 MHz | 170 |
| Maximum frequency Fmax | Speed 01; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V | max 60 MHz | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 7.2 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 6.5 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 5.6 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 4.8 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 01; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3.8 ns | 170 |
| Maximum frequency Fmax | Speed 10; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 60 MHz | 170 |
| Maximum frequency Fmax | Speed 10; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 70 MHz | 170 |
| Maximum frequency Fmax | Speed 10; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 90 MHz | 170 |
| Maximum frequency Fmax | Speed 10; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 110 MHz | 170 |
| Maximum frequency Fmax | Speed 10; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 140 MHz | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 5.3 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 4.6 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3.8 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3 ns | 170 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 10; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 2.2 ns | 170 |
| Maximum frequency Fmax | Speed 11; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 67 MHz | 171 |
| Maximum frequency Fmax | Speed 11; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 100 MHz | 171 |
| Maximum frequency Fmax | Speed 11; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 120 MHz | 171 |
| Maximum frequency Fmax | Speed 11; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 155 MHz | 171 |
| Maximum frequency Fmax | Speed 11; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 200 MHz | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 50 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 5 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 40 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 4.1 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 30 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 3.3 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 20 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 2.5 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 10 pF, 1.71 V ≤ VDD ≤ 2 V; compensation system enabled | max 1.8 ns | 171 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 171 |
| Maximum frequency Fmax | Speed 00; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 171 |
| Maximum frequency Fmax | Speed 00; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 171 |
| Maximum frequency Fmax | Speed 00; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 171 |
| Maximum frequency Fmax | Speed 00; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 1 MHz | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 83 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 79 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 46 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 72 ns | 171 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 00; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V | max 68 ns | 171 |
| Maximum frequency Fmax | Speed 11; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 30 MHz | 174 |
| Maximum frequency Fmax | Speed 11; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 35 MHz | 174 |
| Maximum frequency Fmax | Speed 11; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 44 MHz | 174 |
| Maximum frequency Fmax | Speed 11; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 55 MHz | 174 |
| Maximum frequency Fmax | Speed 11; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 77 MHz | 174 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 50 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 11.1 ns | 174 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 40 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 9.2 ns | 174 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 30 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 7.2 ns | 174 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 20 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 5.4 ns | 174 |
| Output high to low level fall time and output low to high level rise time tr/tf | Speed 11; C = 10 pF, 1.08 V ≤ VDDIO2 ≤ 1.32 V; compensation system enabled | max 3.6 ns | 174 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 2.7 V ≤ VDDIO ≤ 3.6 V | max 2 MHz | 174 |
| Maximum frequency Fmax | Speed 00; C = 50 pF, 1.71 V ≤ VDDIO < 2.7 V | max 1 MHz | 174 |
| Output rise and fall time tr/tf | Speed 00; C = 50 pF, 2.7 V ≤ VDDIO < 3.6 V | max 166 ns | 174 |
| Output rise and fall time tr/tf | Speed 00; C = 50 pF, 1.71 V ≤ VDDIO < 2.7 V | max 330 ns | 174 |
| Maximum frequency Frmax | Speed 01; C = 30 pF, 2.7 V ≤ VDDIO < 3.6 V | max 10 MHz | 174 |
| Maximum frequency Frmax | Speed 01; C = 30 pF, 1.71 V ≤ VDDIO < 2.7 V | max 4 MHz | 174 |
| Output rise and fall time tr/tf | Speed 01; C = 30 pF, 2.7 V ≤ VDDIO < 3.6 V | max 33 ns | 174 |
| Output rise and fall time tr/tf | Speed 01; C = 30 pF, 1.71 V ≤ VDDIO < 2.7 V | max 65 ns | 174 |
| FMC_D[15-0] valid data before FMC_NOE high tsu(D-NOE) | min 11 ns | 191 | |
| FMC_D[15-0] valid data after FMC_NOE high th(NOE-D) | min 0 ns | 191 | |
| FMC_NWE low to FMC_D[15-0] valid tv(NWE-D) | min 0 ns | 191 | |
| Analog supply voltage VDDA | min 1.8 · typ 3.3 · max 3.6 V | 210 | |
| Positive reference voltage VREF+ | min 1.8 V | 210 | |
| Resistive load RL | DAC output buffer ON; connected to VSSA | min 5 kΩ | 210 |
| Resistive load RL | DAC output buffer ON; connected to VDDA | min 25 kΩ | 210 |
| Output impedance RO | DAC output buffer OFF | min 10.3 · typ 13 · max 16 kΩ | 210 |
| Output impedance sample and hold mode, output buffer ON RBON | DAC output buffer ON; VDD = 2.7 V | max 1.6 kΩ | 210 |
| Output impedance sample and hold mode, output buffer ON RBON | DAC output buffer ON; VDD = 2.0 V | max 2.6 kΩ | 210 |
| Output impedance sample and hold mode, output buffer OFF RBOFF | DAC output buffer OFF; VDD = 2.7 V | max 17.8 kΩ | 210 |
| Output impedance sample and hold mode, output buffer OFF RBOFF | DAC output buffer OFF; VDD = 2.0 V | max 18.7 kΩ | 210 |
| Capacitive load CL | DAC output buffer OFF | max 50 pF | 210 |
| Capacitive load CSH | Sample and Hold mode | typ 0.1 · max 1 uF | 210 |
| Voltage on DAC_OUT output VDAC_OUT | DAC output buffer OFF | min 0 V | 210 |
| Load capacitor CL | min 0.5 · typ 1 · max 1.5 uF | 217 | |
| Equivalent serial resistor of CL esr | max 2 Ω | 217 | |
| Static load current Iload | max 4 mA | 217 | |
| Line regulation Iline_reg | 2.8 V ≤ VDDA ≤ 3.6 V; Iload = 500 uA | typ 200 ppm/V | 217 |
| Line regulation Iline_reg | 2.8 V ≤ VDDA ≤ 3.6 V; Iload = 4 mA | typ 100 ppm/V | 217 |
| Load regulation Iload_reg | 500 uA ≤ Iload ≤ 4 mA; Normal mode | typ 50 ppm/mA | 217 |
| Temperature coefficient Tcoeff | -40 °C < TJ < +130 °C | max 100 ppm/°C | 217 |
| Power supply rejection PSRR | DC | typ 60 dB | 217 |
| Power supply rejection PSRR | 100 kHz | typ 40 dB | 217 |
| Start-up time tSTART | CL= 0.5 uF | typ 300 us | 217 |
| Start-up time tSTART | CL= 1 uF | typ 500 us | 217 |
| Start-up time tSTART | CL= 1.5 uF | typ 650 us | 217 |
| Control of maximum DC current drive on VREFBUF_OUT during startup IINRUSH | typ 8 mA | 217 | |
| Consumption from VDDA IDDA(VREFBUF) | ILOAD = 0 uA | typ 15 · max 25 uA | 217 |
| Consumption from VDDA IDDA(VREFBUF) | ILOAD = 500 uA | typ 16 · max 30 uA | 217 |
| Consumption from VDDA IDDA(VREFBUF) | ILOAD = 4 mA | typ 32 · max 50 uA | 217 |
| USB transceiver startup time tSTARTUP | max 1 us | 228 | |
| Rise time in LS trLS | CL = 200 to 600 pF | min 75 · max 300 ns | 228 |
| Fall time in LS tfLS | CL = 200 to 600 pF | min 75 · max 300 ns | 228 |
| Rise/fall time matching in LS trfmLS | tr/tf | min 80 · max 125 % | 228 |
| Rise time in FS trFS | CL = 50 pF | min 4 · max 20 ns | 228 |
| Fall time in FS tfFS | CL = 50 pF | min 4 · max 20 ns | 228 |
| Rise/fall time matching in FS trfmFS | tr/tf | min 90 · max 111 % | 228 |
| Output signal crossover voltage (LS/FS) VCRS | min 1.3 · max 2 V | 228 | |
| Output driver impedance ZDRV | Driving high or low | min 28 · max 44 Ω | 228 |
| Primary detection mode consumption IDD(USBBCD) | max 300 uA | 228 | |
| Secondary detection mode consumption IDD(USBBCD) | max 300 uA | 228 | |
| Data line leakage resistance RDAT_LKG | min 300 kΩ | 228 | |
| Data line leakage voltage VDAT_LKG | min 0 · max 3.6 V | 228 |

hoffmatic/SD-2-EKF
This folder contains the live KiCad project files and local component libraries:



Yes. The symbol is MCU_ST_STM32H5:STM32H562RGTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C19711662, with 1,136 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AT32F435RGT7 by ARTERY, the AT32F435RMT7 by ARTERY, the AT32F437RGT7 by ARTERY and the AT32F437RMT7 by ARTERY. Check their datasheets: a part that fits the footprint may still differ in its ratings.
4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.