2 layers43 × 50 mm
DroneBumper
charlesrwest/droneBumperPCB
The Kicad design files associated with the DroneBumper.
30 parts
2 layers39 × 50 mm
CANInstallHub
charlesrwest/CANInstallHubA temporary home for the PCB design files for the CANInstallPrototype
- Size
- 39 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 34
- Pads
- 222
- Tracks, vias
- 417, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 4 Oct 2015
- Updated
- 21 Oct 2015
Overview
CANInstallHub is an open-source printed circuit board by charlesrwest, from the charlesrwest/CANInstallHub repository on GitHub. It is a 2-layer board of 39 × 50 mm with 53 parts on 34 nets, routed with 417 tracks and 38 vias.
It is built around the STM32F072C8T6, TJF1051T/3 and 0402ZD475MAT2A, with the DMP3099L-7-ES, RR0510P-102-D and 10104111-0001LF among its other parts. Its parts include 22 connectors, 13 capacitors, 5 resistors, 2 transistors and 2 switches. It belongs with the STM32 boards of this library.
Main components
12
STM32F072C8T6
LQFP-48(7x7)-40℃~+85℃ 1.65V~3.6V 12bit 12bit 16KB 32 Bit 37 48MHz 64KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
TJF1051T/3
SOP-8-40℃~+85℃ 1 2.5mA 4.5V~5.5V 5Mbps 70mA CAN FD Transceiver TXD dominant timeout、ESD Protection、Undervoltage Protection、Thermal shutdown protection、Silent mode SOP-8 CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
0402ZD475MAT2A
040210V 4.7uF X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKyocera AVXMultilayer Ceramic Capacitors MLCC - SMD/SMT
DMP3099L-7-ES
SOT-231 P-Channel 1.4W 1.5V 3.8A 30V 46mΩ@10V、62mΩ@4.5V 550pF 6.5nC@10V 63pF 75pF P-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
RR0510P-102-D
0402-55℃~+125℃ 1kΩ 62.5mW Thin Film Resistor ±0.5% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface Mount
10104111-0001LF
SMD-30℃~+80℃ 1 5P Female Gray Mini-AB Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
ABLS-8.000MHZ-B4-T
HC-49S-SMD-20℃~+70℃ 18pF 80Ω 8MHz Crystal Oscillator ±30ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystalsRR0510P-101-D
0402-55℃~+125℃ 100Ω 25V 62.5mW Thin Film Resistor ±0.5% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface MountRR0510P-103-D
0402-55℃~+125℃ 10kΩ 25V 62.5mW Thin Film Resistor ±0.5% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface MountRR0510P-121-D
0402-55℃~+125℃ 120Ω 62.5mW Thin Film Resistor ±0.5% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSSusumuChip Resistor - Surface Mount
UBC1E221MNS1GS
SMD,D10xL10mm-40℃~+150℃ 1000hrs@150℃ 10mm 10mm 150mA@100kHz 220uF 25V Polarized ±20% SMD,D10xL10mm Aluminum Electrolytic Capacitors - SMD ROHSNichiconAluminum Electrolytic Capacitors - SMDVJ0402Y103KXJCW1BC
040210nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSVishay IntertechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMT
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 4PINHEADER-CAN | 4PINHEADER | J4H-CAN1, J4H-CAN2, J4H-CAN3, J4H-CAN4, J4H-CAN5, J4H-CAN6, J4H-CAN7, J4H-CAN8, J4H-CAN9, J4H-CAN10 |
| 10 | 4PINHEADER-I2C | 4PINHEADER | J4H-I2C1, J4H-I2C2, J4H-I2C3, J4H-I2C4, J4H-I2C5, J4H-I2C6, J4H-I2C7, J4H-I2C8, J4H-I2C9, J4H-I2C10 |
| 4 | GRM155R71C104KA88D | 0402Cap | C3, C6, C7, C10 |
| 3 | VAL** | M2MountingHole | M2MountingHole, M2MountingHole, M2MountingHole |
| 2 | 0402ZD475MAT2A | 0402Cap | C8, C9 |
| 2 | DMP3099L-7 | DMP3099L-7 | Q1, Q2 |
| 2 | GRM1555C1H300FA01J | 0402Cap | C12, C13 |
| 2 | GRM188R61A106KE69D | 0603Cap | C1, C2 |
| 2 | PTS810 SJM 250 SMTR LFS | PTS810-SJM-250-SMTR-LFS | SW1, SW2 |
| 2 | RR0510P-102-D | 0402Cap | R4, R5 |
| 1 | 10104111-0001LF | micro-USBCon | USB1 |
| 1 | 10PINHEADER-GPIO | 10PINHEADER-GPIO | J10H-GPIO1 |
| 1 | 6PINHEADER | 6PINHEADER | J6H1 |
| 1 | 720-LYQ396P1Q236 | 720-LYQ396P1Q236 | D1 |
| 1 | ABLS-8.000MHZ-B4-T | ABLS-8.000MHZ-B4-T | X1 |
| 1 | C1005X5R1A105K050BB | 0402Cap | C4 |
| 1 | NCP1117ST33T3G | NCP1117ST33T3G | U1 |
| 1 | RR0510P-101-D | 0402Cap | R1 |
| 1 | RR0510P-103-D | 0402Cap | R2 |
| 1 | RR0510P-121-D | 0402Cap | R3 |
| 1 | STM32F072C8T6 | STM32F072C8T6 | MCU1 |
| 1 | TJF1051T/3 | TJF1051T-3 | TFJ1 |
| 1 | UBC1E221MNS1GS | UBC1E221MNS1GS | C11 |
| 1 | VJ0402Y103KXJCW1BC | 0402Cap | C5 |
Similar boards
- 4 layers70.8 × 108 mm
- 2 layers41.2 × 38.6 mm
- 4 layers65 × 30 mm
- 4 layers113 × 93.7 mm
Characterizer
patrickyeon/battery-characterizer
battery tester/characterizer hardware, firmware.
217 parts4 - 2 layers147.3 × 83.8 mm
- 6 layers62 × 37 mm
BM Mote 000639-AB
nickraymond/nereus_Pi_shield_ADIN2111
A Raspberry Pi Zero 2W shield built from a copy of the Sofar Bristlemouth mote: ADIN2111 two-port 10BASE-T1L with PoDL, powered from the bus, 5 V for the Pi, a 24 V payload port, and the Sofar mote's power path…
167 parts - 2 layers82.8 × 63 mm
Questions
How big is the CANInstallHub PCB?
It measures 39 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CANInstallHub use?
53 parts, built around the STM32F072C8T6, TJF1051T/3, 0402ZD475MAT2A and DMP3099L-7-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CANInstallHub KiCad files?
From the charlesrwest/CANInstallHub repository on GitHub, at the commit this page was made from: the board is CANInstallHub.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CANInstallHub design in my own project?
Its repository states no licence, so its author keeps all rights: ask charlesrwest before reusing the design.