
STM32F072C8T6
STMicroelectronicsExtended
-40℃~+85℃ 1.65V~3.6V 12bit 12bit 16KB 32 Bit 37 48MHz 64KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32F072C8T6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- LQFP-48(7x7)
- Pins
- 48
- In stock
- 2,998 at JLCPCB (C80488)
- Used on
- 18 open-source boards
Overview
The STM32F072C8T6 is a microcontroller made by STMicroelectronics in a LQFP-48(7x7) package with 48 pins. -40℃~+85℃ 1.65V~3.6V 12bit 12bit 16KB 32 Bit 37 48MHz 64KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F072C8Tx, from KiCad's library) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 2,998 are in stock at JLCPCB (part C80488). 18 open-source boards in 17 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
17- Supply, least
- 2 V · VDD, recommended operating min · p. 53
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 53
- Supply, least
- 1.65 V · VBAT, recommended operating min · p. 53
- Supply, absolute maximum
- 4 V · VDD, absolute max · p. 51
- Works from
- -40 °C · TA, suffix 6, maximum power dissipation min · p. 53
- Works up to
- 85 °C · TA, suffix 6, maximum power dissipation max · p. 53
- Works up to
- 105 °C · TA, suffix 6, low power dissipation max; subject to TJ limit · p. 53
- Junction, hottest
- 150 °C · TJ, absolute max · p. 52
- Junction, hottest
- 105 °C · TJ, suffix 6 operating max · p. 53
- A pin gives at most
- 25 mA · I/O and control pin sink current, absolute max · p. 52
- Takes working
- 24.62 mA · sum of VDD and VDDA typical Run currents, 3.6 V, HSI48, 48 MHz, Flash, all peripherals enabled · p. 56
- Takes at most
- 28.25 mA · sum of VDD and VDDA max Run currents, 3.6 V, HSI48, 48 MHz, Flash, all peripherals enabled, TA = 105 °C · p. 56
- Takes asleep
- 3.7 µA · sum of VDD and VDDA typical Standby currents, 3.6 V, LSI and IWDG off, VDDA monitoring on · p. 59
- Junction to air (LQFP48)
- 54 K/W · junction-to-ambient thermal resistance · p. 121
- Supply, least
- 2.4 V · VDDA, recommended operating min with ADC and DAC used; VDDA ≥ VDD · p. 53
- Takes asleep
- 2.5 µA · sum of VDD and VDDA typical, Standby, LSI and IWDG off, VDDA monitoring off, supplies 3.6 V · p. 59
- A pin gives at most
- 20 mA · GPIO source or sink rating with relaxed VOL/VOH · p. 81
What it is and has
14- CPU clock
- Up to 48 MHz · p. 1
- SRAM
- 16 Kbytes with HW parity · p. 1
- CRC
- CRC calculation unit · p. 1
- Low-power modes
- Sleep, Stop, Standby · p. 1
- DMA
- 7-channel controller · p. 1
- DAC
- 12-bit, 2 channels · p. 1
- Comparators
- 2 fast low-power analog comparators · p. 1
- CAN
- CAN interface · p. 1
- Debug
- Serial wire debug (SWD) · p. 1
- Core
- Arm 32-bit Cortex-M0 CPU · p. 1
- Maximum CPU frequency
- 48 MHz · p. 1
- Timers
- 12 · p. 1
- CRC
- Calculation unit · p. 1
- ADC
- 12-bit · p. 84
Around it
4- cap 5 pF to 20 pF
- between OSC_IN and GND; CL1, typical range; high-quality ceramic for high-frequency applications. Select for the crystal load requirement, include board and pin capacitance, and place close to oscillator pins. · p. 68
- crystal 32.768 kHz
- between OSC32_IN and OSC32_OUT; LSE crystal resonator; place the resonator and load capacitors close to oscillator pins. · p. 69
- cap 0.1 μF
- between NRST and GND; External capacitor in the recommended NRST protection circuit protects against parasitic resets. · p. 84
- diode Schottky diode
- between standard analog input and ground; Recommended on standard analog pins that may inject negative current. · p. 87
Specifications
680| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDD–VSS | min -0.3 · max 4 V | 51 | |
| External I/O supply voltage VDDIO2–VSS | min -0.3 · max 4 V | 51 | |
| External analog supply voltage VDDA–VSS | min -0.3 · max 4 V | 51 | |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | VDD > VDDA | max 0.4 V | 51 |
| External backup supply voltage VBAT–VSS | min -0.3 · max 4 V | 51 | |
| Input voltage on TTa pins VIN | Min VSS - 0.3 V | max 4 V | 51 |
| BOOT0 VIN | min 0 · max 9 V | 51 | |
| Input voltage on any other pin VIN | Min VSS - 0.3 V | max 4 V | 51 |
| Variations between different VDD power pins |∆VDDx| | max 50 mV | 51 | |
| Variations between all the different ground pins |VSSx - VSS| | max 50 mV | 51 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 120 mA | 52 | |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | max -120 mA | 52 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 52 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max -100 mA | 52 | |
| Output current sunk by any I/O and control pin IIO(PIN) | max 25 mA | 52 | |
| Output current source by any I/O and control pin IIO(PIN) | max -25 mA | 52 | |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | max 80 mA | 52 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | max -80 mA | 52 | |
| Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) | max -40 mA | 52 | |
| Injected current on TC and RST pin IINJ(PIN) | Limit ±5 mA | max 5 mA | 52 |
| Injected current on TTa pins IINJ(PIN) | Limit ±5 mA | max 5 mA | 52 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute sum of positive and negative injected currents; limit ±25 mA | max 25 mA | 52 |
| Storage temperature range TSTG | min -65 · max 150 °C | 52 | |
| Maximum junction temperature TJ | Absolute maximum rating | max 150 °C | 52 |
| Internal AHB clock frequency fHCLK | min 0 · max 48 MHz | 53 | |
| Internal APB clock frequency fPCLK | min 0 · max 48 MHz | 53 | |
| Standard operating voltage VDD | min 2 · max 3.6 V | 53 | |
| I/O supply voltage VDDIO2 | Must not be supplied if VDD is not present | min 1.65 · max 3.6 V | 53 |
| Analog operating voltage (ADC and DAC not used) VDDA | Minimum VDD; must have a potential equal to or higher than VDD | max 3.6 V | 53 |
| Analog operating voltage (ADC and DAC used) VDDA | Must have a potential equal to or higher than VDD | min 2.4 · max 3.6 V | 53 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 53 | |
| I/O input voltage VIN | TC and RST I/O; maximum VDDIOx+0.3 V | min -0.3 V | 53 |
| I/O input voltage VIN | TTa I/O; maximum VDDA+0.3 V | min -0.3 V | 53 |
| I/O input voltage VIN | FT and FTf I/O; disable internal pull-up for operation above VDDIOx + 0.3 V | min -0.3 · max 5.5 V | 53 |
| I/O input voltage VIN | BOOT0 | min 0 · max 5.5 V | 53 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | LQFP48; suffix 6; TA = 85 °C | max 370 mW | 53 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 53 |
| Ambient temperature for the suffix 6 version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 53 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 53 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 24.3 · max 26.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 24.3 · max 27.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 24.3 · max 27.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 13.1 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 13.1 · max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 13.1 · max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 24.1 · max 26.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 24.1 · max 27 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 24.1 · max 27.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 13 · max 14.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 13 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 13 · max 15.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 16 · max 18.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 16 · max 18.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 16 · max 19.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 8.76 · max 9.56 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 8.76 · max 9.73 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 8.76 · max 10.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 12.3 · max 13.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 12.3 · max 14.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 12.3 · max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 7.36 · max 7.94 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 7.36 · max 8.37 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 7.36 · max 8.81 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 4.52 · max 5.28 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 4.52 · max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 2.89 · max 3.17 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 2.89 · max 3.26 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 2.89 · max 3.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 1.25 · max 1.39 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 1.25 · max 1.58 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 1.25 · max 1.87 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 0.93 · max 1.06 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 0.93 · max 1.15 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 0.93 · max 1.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 24.1 · max 27.1 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 24.1 · max 27.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 24.1 · max 27.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 12.9 · max 14.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 12.9 · max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 12.9 · max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 16.1 · max 18.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 16.1 · max 18.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 16.1 · max 19.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 8.82 · max 9.69 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 8.82 · max 9.83 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 8.82 · max 10.7 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 12.4 · max 14 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 12.4 · max 14.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 12.4 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 7.31 · max 7.92 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 7.31 · max 8.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 7.31 · max 8.75 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; maximum at TA = 25 °C | typ 4.52 · max 5.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; maximum at TA = 85 °C | typ 4.52 · max 5.35 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; maximum at TA = 105 °C | typ 4.52 · max 5.61 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; maximum at TA = 25 °C | typ 2.87 · max 3.16 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; maximum at TA = 85 °C | typ 2.87 · max 3.25 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; maximum at TA = 105 °C | typ 2.87 · max 3.33 mA | 56 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals enabled; max at TA = 25 °C | typ 23.1 · max 25.4 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals enabled; max at TA = 85 °C | typ 23.1 · max 25.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals enabled; max at TA = 105 °C | typ 23.1 · max 26.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 12.8 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 12.8 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 12.8 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at TA = 25 °C | typ 15.4 · max 17.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at TA = 85 °C | typ 15.4 · max 17.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at TA = 105 °C | typ 15.4 · max 18.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 25 °C | typ 7.96 · max 8.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 85 °C | typ 7.96 · max 9.17 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 105 °C | typ 7.96 · max 9.73 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at TA = 25 °C | typ 11.4 · max 12.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at TA = 85 °C | typ 11.4 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at TA = 105 °C | typ 11.4 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 25 °C | typ 6.48 · max 8.04 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 85 °C | typ 6.48 · max 8.23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 105 °C | typ 6.48 · max 8.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at TA = 25 °C | typ 4.21 · max 4.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at TA = 85 °C | typ 4.21 · max 4.89 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at TA = 105 °C | typ 4.21 · max 5.25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 25 °C | typ 2.07 · max 2.3 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 85 °C | typ 2.07 · max 2.35 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 105 °C | typ 2.07 · max 2.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at TA = 25 °C | typ 0.78 · max 0.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at TA = 85 °C | typ 0.78 · max 0.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at TA = 105 °C | typ 0.78 · max 1.15 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 25 °C | typ 0.36 · max 0.48 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 85 °C | typ 0.36 · max 0.59 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 105 °C | typ 0.36 · max 0.82 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at TA = 25 °C | typ 23.1 · max 24.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at TA = 85 °C | typ 23.1 · max 25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at TA = 105 °C | typ 23.1 · max 25.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 12.6 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 12.6 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 12.6 · max 14 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at TA = 25 °C | typ 15.4 · max 17.4 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at TA = 85 °C | typ 15.4 · max 17.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at TA = 105 °C | typ 15.4 · max 18.2 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 25 °C | typ 8.05 · max 8.85 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 85 °C | typ 8.05 · max 9.16 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 105 °C | typ 8.05 · max 9.94 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at TA = 25 °C | typ 11.5 · max 13 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at TA = 85 °C | typ 11.5 · max 13.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at TA = 105 °C | typ 11.5 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 25 °C | typ 6.49 · max 8.06 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 85 °C | typ 6.49 · max 8.21 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 105 °C | typ 6.49 · max 8.47 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at TA = 25 °C | typ 4.34 · max 4.75 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at TA = 85 °C | typ 4.34 · max 5.03 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at TA = 105 °C | typ 4.34 · max 5.41 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 25 °C | typ 2.11 · max 2.36 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 85 °C | typ 2.11 · max 2.38 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 105 °C | typ 2.11 · max 2.98 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals enabled; max at TA = 25 °C | typ 15.1 · max 16.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals enabled; max at TA = 85 °C | typ 15.1 · max 16.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals enabled; max at TA = 105 °C | typ 15.1 · max 17.5 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 3.08 · max 3.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 3.08 · max 3.56 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 3.08 · max 3.61 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at TA = 25 °C | typ 15 · max 16.5 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at TA = 85 °C | typ 15 · max 16.7 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at TA = 105 °C | typ 15 · max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 2.93 · max 3.28 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 2.93 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 2.93 · max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at TA = 25 °C | typ 9.9 · max 11.4 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at TA = 85 °C | typ 9.9 · max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at TA = 105 °C | typ 9.9 · max 11.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 25 °C | typ 2 · max 2.24 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 85 °C | typ 2 · max 2.32 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 105 °C | typ 2 · max 2.49 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at TA = 25 °C | typ 7.43 · max 8.17 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at TA = 85 °C | typ 7.43 · max 8.71 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at TA = 105 °C | typ 7.43 · max 8.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 25 °C | typ 1.63 · max 1.82 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 85 °C | typ 1.63 · max 1.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 105 °C | typ 1.63 · max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at TA = 25 °C | typ 2.83 · max 3.09 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at TA = 85 °C | typ 2.83 · max 3.26 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at TA = 105 °C | typ 2.83 · max 3.66 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 25 °C | typ 0.76 · max 0.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 85 °C | typ 0.76 · max 0.91 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 105 °C | typ 0.76 · max 0.93 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at TA = 25 °C | typ 0.42 · max 0.54 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at TA = 85 °C | typ 0.42 · max 0.55 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at TA = 105 °C | typ 0.42 · max 0.67 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 25 °C | typ 0.28 · max 0.39 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 85 °C | typ 0.28 · max 0.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 105 °C | typ 0.28 · max 0.43 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at TA = 25 °C | typ 15 · max 17.2 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at TA = 85 °C | typ 15 · max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at TA = 105 °C | typ 15 · max 17.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 3.04 · max 3.37 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 3.04 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 3.04 · max 3.46 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at TA = 25 °C | typ 9.93 · max 11.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at TA = 85 °C | typ 9.93 · max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at TA = 105 °C | typ 9.93 · max 11.7 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 25 °C | typ 2.11 · max 2.35 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 85 °C | typ 2.11 · max 2.44 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 105 °C | typ 2.11 · max 2.65 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at TA = 25 °C | typ 7.53 · max 8.45 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at TA = 85 °C | typ 7.53 · max 8.87 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at TA = 105 °C | typ 7.53 · max 8.95 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 25 °C | typ 1.64 · max 1.83 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 85 °C | typ 1.64 · max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 105 °C | typ 1.64 · max 1.93 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at TA = 25 °C | typ 2.95 · max 3.24 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at TA = 85 °C | typ 2.95 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at TA = 105 °C | typ 2.95 · max 3.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 25 °C | typ 0.8 · max 0.92 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 85 °C | typ 0.8 · max 0.94 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 105 °C | typ 0.8 · max 0.97 mA | 57 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 311 · max 326 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 311 · max 334 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 311 · max 343 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 322 · max 337 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 322 · max 345 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 322 · max 354 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 152 · max 170 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 152 · max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 152 · max 182 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 165 · max 184 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 165 · max 196 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 165 · max 200 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 105 · max 121 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 105 · max 126 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 105 · max 128 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 113 · max 129 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 113 · max 136 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 113 · max 138 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 81.9 · max 95.9 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 81.9 · max 99.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 81.9 · max 101 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 88.7 · max 102 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 88.7 · max 107 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 88.7 · max 108 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 2.7 · max 3.8 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 2.7 · max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 2.7 · max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 3.6 · max 4.7 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 3.6 · max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 3.6 · max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 2.7 · max 3.8 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 2.7 · max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 2.7 · max 4.6 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 3.6 · max 4.7 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 3.6 · max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 3.6 · max 5.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 223 · max 244 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 223 · max 255 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 223 · max 260 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 245 · max 265 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 245 · max 279 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 245 · max 284 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 176 · max 195 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 176 · max 203 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 176 · max 206 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 193 · max 212 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 193 · max 221 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 193 · max 224 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 154 · max 171 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 154 · max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 154 · max 181 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 168 · max 185 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 168 · max 192 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 168 · max 195 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at TA = 25 °C | typ 74.2 · max 83.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at TA = 85 °C | typ 74.2 · max 86.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at TA = 105 °C | typ 74.2 · max 87.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at TA = 25 °C | typ 83.4 · max 92.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at TA = 85 °C | typ 83.4 · max 95.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at TA = 105 °C | typ 83.4 · max 96.6 uA | 58 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 15.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 15.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 15.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 15.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 15.8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 15.9 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 25 °C | max 23 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 85 °C | max 49 uA | 59 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 105 °C | max 68 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 3.2 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 3.3 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 3.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 3.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 3.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 3.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 33 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 51 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 0.8 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 0.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 0.7 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C | max 2.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C | max 2.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C | max 3.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C | max 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C | max 3.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 59 |
| Thermal resistance junction-ambient ΘJA | LQFP48 - 7 × 7 mm; value column | typ 54 °C/W | 121 |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | max 0.4 V | 51 | |
| Injected current on B, FT and FTf pins IINJ(PIN) | Negative/positive injection limits | min -5 · max 0 mA | 52 |
| Injected current on TC and RST pin IINJ(PIN) | ±5 mA | min -5 · max 5 mA | 52 |
| Injected current on TTa pins IINJ(PIN) | ±5 mA | min -5 · max 5 mA | 52 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute sum of instantaneous positive and negative injected currents; ±25 mA | min -25 · max 25 mA | 52 |
| Maximum junction temperature TJ | max 150 °C | 52 | |
| I/O input voltage VIN | FT and FTf I/O; internal pull-up resistor disabled for operation above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 53 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | LQFP48; suffix 6, TA = 85 °C | max 370 mW | 53 |
| PVD threshold 4 VPVD4 | Rising edge | min 2.47 · typ 2.58 · max 2.69 V | 55 |
| PVD threshold 4 VPVD4 | Falling edge | min 2.37 · typ 2.48 · max 2.59 V | 55 |
| PVD threshold 5 VPVD5 | Rising edge | min 2.57 · typ 2.68 · max 2.79 V | 55 |
| PVD threshold 5 VPVD5 | Falling edge | min 2.47 · typ 2.58 · max 2.69 V | 55 |
| PVD threshold 6 VPVD6 | Rising edge | min 2.66 · typ 2.78 · max 2.9 V | 55 |
| PVD threshold 6 VPVD6 | Falling edge | min 2.56 · typ 2.68 · max 2.8 V | 55 |
| PVD threshold 7 VPVD7 | Rising edge | min 2.76 · typ 2.88 · max 3 V | 55 |
| PVD threshold 7 VPVD7 | Falling edge | min 2.66 · typ 2.78 · max 2.9 V | 55 |
| PVD hysteresis VPVDhyst | Guaranteed by design, not tested in production | typ 100 mV | 55 |
| PVD current consumption IDD(PVD) | Maximum guaranteed by design, not tested in production | typ 0.15 · max 0.26 uA | 55 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.2 · typ 1.23 · max 1.25 V | 55 |
| ADC_IN17 buffer startup time tSTART | Guaranteed by design, not tested in production | max 10 us | 55 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design, not tested in production | min 4 us | 55 |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V; guaranteed by design, not tested in production | max 10 mV | 55 |
| Temperature coefficient TCoeff | Guaranteed by design, not tested in production | min -100 · max 100 ppm/°C | 55 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 25 °C | typ 24.3 · max 26.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 85 °C | max 27.2 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 105 °C | max 27.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 25 °C | typ 13.1 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 85 °C | max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 105 °C | max 15.5 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 24.1 · max 27 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 13 · max 14.8 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 8.76 · max 9.73 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 12.3 · max 14.3 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 7.36 · max 8.37 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.52 · max 5.28 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.89 · max 3.26 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 85 °C | typ 1.25 · max 1.58 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.93 · max 1.15 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 24.1 · max 27.6 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.9 · max 14.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 16.1 · max 18.9 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 8.82 · max 9.83 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 12.4 · max 14.4 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 7.31 · max 8.34 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.52 · max 5.35 mA | 56 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.87 · max 3.25 mA | 56 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 23.1 · max 25.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.8 · max 13.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; typical only | typ 23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | max 25.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.6 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 15.4 · max 17.8 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 7.96 · max 9.17 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 11.4 · max 13.5 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 6.48 · max 8.23 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.21 · max 4.89 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.07 · max 2.35 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 85 °C | typ 0.78 · max 0.92 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.36 · max 0.59 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 23.1 · max 25 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 12.6 · max 13.9 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 15.4 · max 17.7 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 8.05 · max 9.16 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 11.5 · max 13.6 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 6.49 · max 8.21 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 4.34 · max 5.03 mA | 57 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.11 · max 2.38 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 15.1 · max 16.8 mA | 57 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 3.08 · max 3.56 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 15 · max 16.7 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.93 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 9.9 · max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 2 · max 2.32 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 7.43 · max 8.71 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 1.63 · max 1.88 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 2.83 · max 3.26 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.76 · max 0.91 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled; max at TA = 85 °C | typ 0.42 · max 0.55 mA | 57 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.28 · max 0.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled; max at TA = 85 °C | typ 15 · max 17.3 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at TA = 85 °C | typ 3.04 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled; max at TA = 85 °C | typ 9.93 · max 11.6 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at TA = 85 °C | typ 2.11 · max 2.44 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled; max at TA = 85 °C | typ 7.53 · max 8.87 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at TA = 85 °C | typ 1.64 · max 1.9 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled; max at TA = 85 °C | typ 2.95 · max 3.41 mA | 57 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at TA = 85 °C | typ 0.8 · max 0.94 mA | 57 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 311 · max 334 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 322 · max 345 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 152 · max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 165 · max 196 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 105 · max 126 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 113 · max 136 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 81.9 · max 99.5 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 88.7 · max 107 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 2.7 · max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 3.6 · max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 2.7 · max 4.3 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 3.6 · max 5.2 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 223 · max 255 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 245 · max 279 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 176 · max 203 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 193 · max 221 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 154 · max 178 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 168 · max 192 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 2.4 V; max at TA = 85 °C | typ 74.2 · max 86.4 uA | 58 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz; VDDA = 3.6 V; max at TA = 85 °C | typ 83.4 · max 95.3 uA | 58 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V; typical | typ 3.2 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V; typical | typ 3.3 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V; typical | typ 3.4 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V; typical | typ 3.5 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V; typical | typ 3.6 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V; typical | typ 3.7 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 25 °C; maximum | max 8 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 85 °C; maximum | max 33 uA | 59 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 105 °C; maximum | max 51 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V; typical | typ 0.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V; typical | typ 0.7 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V; typical | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V; typical | typ 0.9 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V; typical | typ 1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V; typical | typ 1.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C; maximum | max 2.1 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C; maximum | max 2.6 uA | 59 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C; maximum | max 3.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V; typical | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V; typical | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V; typical | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V; typical | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V; typical | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V; typical | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °C; maximum | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °C; maximum | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °C; maximum | max 4.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V; typical | typ 2.1 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V; typical | typ 2.2 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V; typical | typ 2.3 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V; typical | typ 2.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V; typical | typ 2.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V; typical | typ 2.8 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C; maximum | max 3.5 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C; maximum | max 3.6 uA | 59 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C; maximum | max 4.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V; typical | typ 1.9 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V; typical | typ 2.1 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V; typical | typ 2.2 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V; typical | typ 2.3 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V; typical | typ 2.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V; typical | typ 2.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C; maximum | max 3.5 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C; maximum | max 3.6 uA | 59 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C; maximum | max 4.6 uA | 59 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.65 V | typ 0.5 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 1.8 V | typ 0.6 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.4 V | typ 0.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 2.7 V | typ 0.8 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.3 V | typ 1.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; VBAT = 3.6 V | typ 1.2 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 25 °C | max 1.3 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 85 °C | max 1.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, lower driving capability; LSEDRV[1:0] = '00'; TA = 105 °C | max 2.3 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.65 V | typ 0.8 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 1.8 V | typ 0.9 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.4 V | typ 1.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 2.7 V | typ 1.2 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.3 V | typ 1.4 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; VBAT = 3.6 V | typ 1.6 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 25 °C | max 1.7 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 85 °C | max 2.1 uA | 60 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode, higher driving capability; LSEDRV[1:0] = '11'; TA = 105 °C | max 2.8 uA | 60 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 24.1 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 13.5 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 14.6 mA | 61 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 3.5 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals enabled | typ 18.3 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals disabled | typ 10.5 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals enabled | typ 11.1 mA | 61 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals disabled | typ 2.9 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals enabled | typ 16.5 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals disabled | typ 9.6 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals enabled | typ 10 mA | 61 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals disabled | typ 2.7 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals enabled | typ 12.9 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals disabled | typ 7.6 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals enabled | typ 7.8 mA | 61 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals disabled | typ 2.2 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals enabled | typ 8.9 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals disabled | typ 5.3 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals enabled | typ 5.5 mA | 61 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals disabled | typ 1.7 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals enabled | typ 4.8 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals disabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals enabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals disabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals enabled | typ 3.1 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals disabled | typ 2.1 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals enabled | typ 2.2 mA | 61 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals disabled | typ 1.1 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals enabled | typ 2.1 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals disabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals enabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals enabled | typ 1.6 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals disabled | typ 1.3 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals enabled | typ 1.4 mA | 61 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals enabled | typ 1.3 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals disabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals enabled | typ 1.2 mA | 61 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals disabled | typ 1 mA | 61 |
| Current consumption from VDDA supply IDDA | 48 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 163.3 uA | 61 |
| Current consumption from VDDA supply IDDA | 36 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 124.3 uA | 61 |
| Current consumption from VDDA supply IDDA | 32 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 111.9 uA | 61 |
| Current consumption from VDDA supply IDDA | 24 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 87.1 uA | 61 |
| Current consumption from VDDA supply IDDA | 16 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 62.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 8 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 4 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 2 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 1 MHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| Current consumption from VDDA supply IDDA | 500 kHz; Run and Sleep modes; peripherals enabled or disabled | typ 2.5 uA | 61 |
| BusMatrix | AHB; 25 °C | typ 2.2 uA/MHz | 64 |
| CRC | AHB; 25 °C | typ 1.6 uA/MHz | 64 |
| DMA | AHB; 25 °C | typ 5.7 uA/MHz | 64 |
| Flash memory interface | AHB; 25 °C | typ 13 uA/MHz | 64 |
| GPIOA | AHB; 25 °C | typ 8.2 uA/MHz | 64 |
| GPIOB | AHB; 25 °C | typ 8.5 uA/MHz | 64 |
| GPIOC | AHB; 25 °C | typ 2.3 uA/MHz | 64 |
| GPIOD | AHB; 25 °C | typ 1.9 uA/MHz | 64 |
| GPIOE | AHB; 25 °C | typ 2.2 uA/MHz | 64 |
| GPIOF | AHB; 25 °C | typ 1.2 uA/MHz | 64 |
| SRAM | AHB; 25 °C | typ 0.9 uA/MHz | 64 |
| TSC | AHB; 25 °C | typ 5 uA/MHz | 64 |
| All AHB peripherals | 25 °C | typ 52.6 uA/MHz | 64 |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 32 MHz | 68 | |
| Feedback resistor RF | typ 200 kΩ | 68 | |
| HSE current consumption IDD | During startup | max 8.5 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 10 pF@8 MHz | typ 0.4 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 45 Ω, CL = 10 pF@8 MHz | typ 0.5 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 5 pF@32 MHz | typ 0.8 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 10 pF@32 MHz | typ 1 mA | 68 |
| HSE current consumption IDD | VDD = 3.3 V, Rm = 30 Ω, CL = 20 pF@32 MHz | typ 1.5 mA | 68 |
| Oscillator transconductance gm | Startup | min 10 mA/V | 68 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 68 |
| LSE current consumption IDD | low drive capability | typ 0.5 · max 0.9 uA | 69 |
| LSE current consumption IDD | medium-low drive capability | max 1 uA | 69 |
| LSE current consumption IDD | medium-high drive capability | max 1.3 uA | 69 |
| LSE current consumption IDD | high drive capability | max 1.6 uA | 69 |
| Oscillator transconductance gm | low drive capability | min 5 uA/V | 69 |
| Oscillator transconductance gm | medium-low drive capability | min 8 uA/V | 69 |
| Oscillator transconductance gm | medium-high drive capability | min 15 uA/V | 69 |
| Oscillator transconductance gm | high drive capability | min 25 uA/V | 69 |
| Startup time tSU(LSE) | VDDIOx is stabilized | typ 2 s | 69 |
| Frequency fLSI | VDDA = 3.3 V, TA = –40 to 105 °C | min 30 · typ 40 · max 50 kHz | 74 |
| LSI oscillator startup time tsu(LSI) | VDDA = 3.3 V, TA = –40 to 105 °C | max 85 us | 74 |
| LSI oscillator power consumption IDDA(LSI) | VDDA = 3.3 V, TA = –40 to 105 °C | typ 0.75 · max 1.2 uA | 74 |
| PLL input clock fPLL_IN | min 1 · typ 8 · max 24 MHz | 74 | |
| PLL input clock duty cycle fPLL_IN | min 40 · max 60 % | 74 | |
| PLL multiplier output clock fPLL_OUT | min 16 · max 48 MHz | 74 | |
| PLL lock time tLOCK | max 200 us | 74 | |
| Cycle-to-cycle jitter JitterPLL | max 300 ps | 74 | |
| 16-bit programming time tprog | TA = - 40 to +105 °C | min 40 · typ 53.5 · max 60 us | 74 |
| Page (2 KB) erase time tERASE | TA = - 40 to +105 °C | min 20 · max 40 ms | 74 |
| Mass erase time tME | TA = - 40 to +105 °C | min 20 · max 40 ms | 74 |
| Supply current IDD | Write mode; TA = –40 to 105 °C | max 10 mA | 74 |
| Supply current IDD | Erase mode; TA = –40 to 105 °C | max 12 mA | 74 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | All packages; Class 2; TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001 | max 2000 V | 77 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All others, including LQFP48; Class C2a; TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-002 | max 500 V | 77 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 6 mA; VDDIOx ≥ 2 V | max 0.4 V | 81 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA | max 0.4 V | 81 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 81 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 10 mA | max 0.4 V | 81 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx ≥ 2 V | max 2 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx ≥ 2 V | max 125 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx ≥ 2 V | max 125 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx < 2 V | max 1 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx < 2 V | max 125 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF, VDDIOx < 2 V | max 125 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx ≥ 2 V | max 10 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx ≥ 2 V | max 25 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx ≥ 2 V | max 25 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx < 2 V | max 4 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx < 2 V | max 62.5 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDDIOx < 2 V | max 62.5 ns | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 V | max 50 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 V | max 30 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, 2 V ≤ VDDIOx < 2.7 V | max 20 MHz | 82 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2 V | max 10 MHz | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 V | max 5 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 V | max 8 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 82 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2 V | max 25 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDDIOx ≥ 2.7 V | max 5 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx ≥ 2.7 V | max 8 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 82 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF, VDDIOx < 2 V | max 25 ns | 82 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF, VDDIOx ≥ 2 V | max 2 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF, VDDIOx ≥ 2 V | max 12 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF, VDDIOx ≥ 2 V | max 34 ns | 83 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF, VDDIOx < 2 V | max 0.5 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF, VDDIOx < 2 V | max 16 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF, VDDIOx < 2 V | max 44 ns | 83 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 83 | |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | typ 200 mV | 84 | |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 84 |
| NRST input filtered pulse VF(NRST) | max 100 ns | 84 | |
| NRST input not filtered pulse VNF(NRST) | 2.7 < VDD < 3.6 | min 300 ns | 84 |
| NRST input not filtered pulse VNF(NRST) | 2.0 < VDD < 3.6 | min 500 ns | 84 |
| Analog supply voltage for ADC ON VDDA | min 2.4 · max 3.6 V | 84 | |
| Current consumption of the ADC IDDA (ADC) | VDDA = 3.3 V | typ 0.9 mA | 84 |
| ADC clock frequency fADC | min 0.6 · max 14 MHz | 84 | |
| Sampling rate fS | 12-bit resolution | min 0.043 · max 1 MHz | 84 |
| Thermal resistance junction-ambient ΘJA | LQFP48 - 7 × 7 mm | typ 54 °C/W | 121 |
Pins, by the datasheet
29- 1 VBAT
- Backup power supply. · p. 36
- 2 PC13
- GPIO with WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT functions. · p. 37
- 3 PC14-OSC32_IN
- PC14 GPIO or OSC32_IN. · p. 32
- 4 PC15-OSC32_OUT
- PC15 GPIO or OSC32_OUT. · p. 32
- 5 PF0-OSC_IN
- PF0 GPIO, CRS_ SYNC or OSC_IN. · p. 37
- 6 PF1-OSC_OUT
- PF1 GPIO or OSC_OUT. · p. 37
- 7 NRST
- Active-low device reset input and internal reset output, with embedded weak pull-up resistor. · p. 37
- 8 VSSA
- Analog ground. · p. 37
- 9 VDDA
- Analog power supply. · p. 37
- 10 PA0
- GPIO with USART2_CTS, TIM2_CH1_ETR, COMP1_OUT, TSC_G1_IO1, USART4_TX, RTC_ TAMP2, WKUP1, ADC_IN0 and COMP1_INM6 functions. · p. 37
- 11 PA1
- GPIO; USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX, EVENTOUT, ADC_IN1 and COMP1_INP. · p. 38
- 12 PA2
- GPIO; USART2_TX, COMP2_OUT, TIM2_CH3, TIM15_CH1, TSC_G1_IO3, ADC_IN2, COMP2_INM6 and WKUP4. · p. 38
- 13 PA3
- GPIO; USART2_RX, TIM2_CH4, TIM15_CH2, TSC_G1_IO4, ADC_IN3 and COMP2_INP. · p. 38
- 14 PA4
- GPIO; SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT1. · p. 38
- 15 PA5
- GPIO; SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2, COMP1_INM5, COMP2_INM5, ADC_IN5 and DAC_OUT2. · p. 38
- 16 PA6
- GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT, TSC_G2_IO3, EVENTOUT, USART3_CTS and ADC_IN6. · p. 38
- 17 PA7
- GPIO; SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4, EVENTOUT and ADC_IN7. · p. 38
- 18 PB0
- GPIO; TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, USART3_CK and ADC_IN8. · p. 39
- 19 PB1
- GPIO; TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 and ADC_IN9. · p. 39
- 20 PB2
- GPIO; TSC_G3_IO4. · p. 39
- 21 PB10
- GPIO; SPI2_SCK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC and TIM2_CH3. · p. 39
- 22 PB11
- GPIO; USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 and I2C2_SDA. · p. 39
- 23 VSS
- Ground. · p. 39
- 43 PB7
- GPIO; I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N and TSC_G5_IO4. · p. 43
- 44 BOOT0
- Boot memory selection. · p. 43
- 45 PB8
- GPIO; I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC and CAN_RX. · p. 43
- 46 PB9
- GPIO; SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT and CAN_TX. · p. 43
- 47 VSS
- Ground. · p. 43
- 48 VDD
- Digital power supply. · p. 43
- 2 layers82.8 × 63 mm

- 2 layers50 × 75 mm

- 2 layers26.1 × 15 mm

Usb2can pcb
myaki-moe/usb2can
A compact and low cost open source USB to CAN bus adaptor. 紧凑且低成本的开源USB到CAN总线适配器
19 parts10GPL-3.0 - 2 layers50 × 100 mm

ActiveLoad
ahessling/ActiveLoad
Small 12 Watt Active Load (dummy load) with STM32 microcontroller
83 parts5MIT - 2 layers100 × 50 mm

WindowMaster
agausmann/WindowMaster
A physical controller for the Windows Volume Mixer (sndvol)
81 parts3 - 2 layers59 × 22 mm

- 4 layers50 × 20 mm

GCode Buttons MCU
meteyou/klipper-gcode-buttons
The Klipper Gcode-Buttons offer a unique control and status display solution in 3D printers and automated systems.
57 parts2GPL-3.0 - 2 layers50 × 50 mm

Parts like it
8STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F030C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2.4V~3.6V 32 Bit 39 48MHz 64KB 8KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G070CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 2V~3.6V 32 Bit 36KB 43 64MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G030C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2V~3.6V 32 Bit 44 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)GD32F303CCT6
LQFP-48(7x7)120MHz 12bit 12bit 2.6V~3.6V 256KB 37 ARM Cortex-M4 FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F103C8T6
LQFP-48(7x7)108MHz 12bit 2.6V~3.6V 37 64KB ARM Cortex-M3 FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)STM32F030C6T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2.4V~3.6V 32 Bit 32KB 39 48MHz 4KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)GD32F103CBT6
LQFP-48(7x7)108MHz 128KB 12bit 2.6V~3.6V 37 ARM Cortex-M3 FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32F072C8T6?
Yes. The symbol is MCU_ST_STM32F0:STM32F072C8Tx and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F072C8T6?
LQFP-48(7x7), with 48 pins. Its footprint is drawn on this page.
Where is the STM32F072C8T6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F072C8T6?
JLCPCB lists it as part C80488, with 2,998 in stock; the sellers' links on this page open their listings.
What can replace the STM32F072C8T6?
Parts like it in the library: the STM32F103C8T6 by STMicroelectronics, the STM32F030C8T6 by STMicroelectronics, the STM32G070CBT6 by STMicroelectronics and the STM32G030C8T6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F072C8T6?
18 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.