Skip to the content
2 layers26.1 × 15 mmUsb2can pcb, the printed circuit board in 3D

A compact and low cost open source USB to CAN bus adaptor. 紧凑且低成本的开源USB到CAN总线适配器

Size
26.1 × 15 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
51
Pads
115
Tracks, vias
254, 27
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
11 Nov 2022
Updated
23 Jan 2023

Overview

Usb2can pcb is an open-source printed circuit board by myaki-moe, from the myaki-moe/usb2can repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26.1 × 15 mm with 19 parts on 51 nets, routed with 254 tracks and 27 vias.

It is built around the STM32F072C8T6, MAX3051EKA and XC6206P332MR. Its parts include 5 capacitors, 5 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.

Main components

3

README

README.md

USB2CAN

USB2CAN is a compact and low cost open source USB to CAN bus adaptor.

Based on candleLight firmware and STM32F072 crystal-less MCU, usb2can provides linux native socketcan support.

USB2CAN是一款紧凑且低成本的开源USB到CAN总线转化器.

基于candleLight固件和STM32F072无外置晶振MCU, usb2can提供了Linux原生SocketCAN支持.

Quick Start | 快速开始

  1. PCB proofing using GERBER file usb2can_pcb/gerber/
  2. SMD or hand soldering using ibom
  3. Build candleLight firmware
  4. Flash the firmware using dfu-utils
  5. Testing
bash
sudo ip link set can0 up type can bitrate 1000000
# CAN receive
candump can0
# CAN send
cansend can0 200#5A5A5A5A5A5A5A5A
  1. 使用GERBER文件 usb2can_pcb/gerber/ 打样PCB
  2. SMT或使用 ibom手工焊接
  3. 编译candleLight固件
  4. 使用 dfu-utils 烧录固件
  5. 测试
bash
sudo ip link set can0 up type can bitrate 1000000
# CAN receive
candump can0
# CAN send
cansend can0 200#5A5A5A5A5A5A5A5A

Toolchains | 工具链

  • PCB Design: KiCad 6.0.9

  • Complier: arm-none-eabi-gcc 12.2.0

  • Firmware Programmer: dfu-utils 0.11

  • PCB设计: KiCad 6.0.9

  • 编译器: arm-none-eabi-gcc 12.2.0

  • 固件烧录: dfu-utils 0.11

License | 许可证

  • The USB2CAN project is released under GPLv3 license.

  • candleLight Firmware Sources is distributed under the MIT License (MIT) Copyright (c) 2016 Hubert Denkmair

  • The STM32 HAL is distributed under a non-restrictive BSD (Berkeley Software Distribution) license.

  • Code from the STM32 USB library is licensed under ST STMicroelectronics Ultimate Liberty license SLA0044

  • USB2CAN项目基于GPLv3协议发布

  • candleLight固件源码根据MIT分发, 版权所有2016 Hubert Denkmair

  • STM32 HAL 在非限制性BSD许可下分发.

  • STM32 USB 库中的代码根据 Ultimate Liberty license SLA0044 获得许可

Related Projects | 相关项目

candleLight_fw

Parts

19
QtyValueFootprintReferences
31uFCapacitor_SMD:C_0402_1005MetricC2, C3, C4
20.1uFCapacitor_SMD:C_0402_1005MetricC1, C5
220KResistor_SMD:R_0402_1005MetricR1, R3
2510RResistor_SMD:R_0402_1005MetricR4, R5
2CANConnector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_HorizontalJ2, J3
10.5AFuse:Fuse_0603_1608MetricF1
110KResistor_SMD:R_0402_1005MetricR2
1LED_BDiode_SMD:D_0402_1005MetricD2
1LED_GDiode_SMD:D_0402_1005MetricD1
1MAX3051Package_TO_SOT_SMD:SOT-23-8U3
1STM32F072C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU2
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_Palconn_UTC16-GJ1
1XC6206P332MRPackage_TO_SOT_SMD:SOT-23U1

Similar boards

  • 2 layers389.5 × 155.3 mmPENIS, the printed circuit board in 3D

    PENIS

    JakeLikesCake/pcb_epic_new_inovation_system_aka_penis

    395 parts
  • 2 layers82.8 × 63 mmBldc BMS, the printed circuit board in 3D

    Bldc BMS

    mpater/bldc-BMS

    Battery management system for a VESC

    175 parts26
  • 2 layers50 × 75 mmLocalTrack, the printed circuit board in 3D

    LocalTrack

    krakrukra/LocalTrack

    OSHW GPS Tracker (Logger)

    63 parts18MIT
  • 2 layers50 × 100 mmActiveLoad, the printed circuit board in 3D

    ActiveLoad

    ahessling/ActiveLoad

    Small 12 Watt Active Load (dummy load) with STM32 microcontroller

    83 parts5MIT
  • 2 layers100 × 50 mmWindowMaster, the printed circuit board in 3D

    WindowMaster

    agausmann/WindowMaster

    A physical controller for the Windows Volume Mixer (sndvol)

    81 parts3
  • 2 layers59 × 22 mmCANberry, the printed circuit board in 3D

    CANberry

    joshajohnson/car-hacking

    A repo for assorted tools, projects, and documentation.

    86 parts2
  • 4 layers50 × 20 mmGCode Buttons MCU, the printed circuit board in 3D

    GCode Buttons MCU

    meteyou/klipper-gcode-buttons

    The Klipper Gcode-Buttons offer a unique control and status display solution in 3D printers and automated systems.

    57 parts2GPL-3.0
  • 2 layers50 × 50 mmEyore test, the printed circuit board in 3D

    Eyore test

    projectgus/eyore-test

    ESP8266 hardware test assembly for esp-open-rtos

    36 parts1

Questions

How big is the Usb2can pcb PCB?

It measures 26.1 × 15 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Usb2can pcb use?

19 parts, built around the STM32F072C8T6, MAX3051EKA and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Usb2can pcb KiCad files?

From the myaki-moe/usb2can repository on GitHub, at the commit this page was made from: the board is usb2can_pcb/usb2can_pcb.kicad_pcb and its schematic usb2can_pcb/usb2can_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Usb2can pcb design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).