2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0
2 layers100 × 65 mm
2065-Z80-programmer
Z80-Retro/2065-Z80-programmer11A FLASH programmer for 2063-Z80
- Size
- 100 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 85
- Pads
- 189
- Tracks, vias
- 418, 72
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Sep 2021
- Updated
- 2 Mar 2026
Overview
2065-Z80-programmer is an open-source printed circuit board by Z80-Retro, from the Z80-Retro/2065-Z80-programmer repository on GitHub. It is a 2-layer board of 100 × 65 mm with 31 parts on 85 nets, routed with 418 tracks and 72 vias.
It is built around the PN2222A. Its parts include 7 capacitors, 7 resistors, 4 connectors, 3 transistors and 2 ICs. It belongs with the retro computing and games and interfaces and adapters boards of this library.
Main components
1README
README.mdAn in-circuit programmer for the FLASH on a 2063-Z80 board.
- A youtube playlist discussing this project and how to build your own can be found in John's Basement
- A PDF version of the schematic can be found here.
- Here is the as-built BOM with links to the datasheets for all the parts.
- Here is another BOM with links to sockets for the chips.
- A Raspberry PI application for this board can be found in the pi directory.
- To configure a new PI for use with this programmer board as well as to develop Z80 code for the Z80 Retro board, see this PI Setup Guide
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | .1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C4, C6 |
| 5 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H1, H2, H3, H4, H5 |
| 4 | 2K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R6 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C7 |
| 2 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 2N7000 | Package_TO_SOT_THT:TO-92 | Q1, Q2 |
| 2 | MCP23017-E_SP | Package_DIP:DIP-28_W7.62mm_Socket | U1, U2 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x20_Counter_Clockwise | jb-footprint:PinSocket_2x20_P2.54mm_Vertical_clockwise | J2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_11.4x12mm_SilkScreen | LOGO10 |
| 1 | PN2222 | Package_TO_SOT_THT:TO-92L | Q3 |
Similar boards
- 2 layers33.7 × 66 mm
Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 4 layers100 × 100 mm
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers28.8 × 43.8 mm
- 2 layers23.2 × 52.1 mm
- 4 layers184.2 × 169.5 mm
- 2 layers49.5 × 30 mm
Questions
How big is the 2065-Z80-programmer PCB?
It measures 100 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2065-Z80-programmer use?
31 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2065-Z80-programmer KiCad files?
From the Z80-Retro/2065-Z80-programmer repository on GitHub, at the commit this page was made from: the board is 2065-Z80-programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2065-Z80-programmer design in my own project?
Its repository states no licence, so its author keeps all rights: ask Z80-Retro before reusing the design.