Skip to the content
2 layers49.8 × 49.8 mmIsoUSBRS422, the printed circuit board in 3D

isoUSBRS422 is an isolated USB - RS422/RS485 converter. It is designed using KiCad. Repository includes KiCad project and necessary firmware files.

Size
49.8 × 49.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
38
Pads
180
Tracks, vias
511, 53
Pours
5
Routed
Yes
KiCad
KiCad 3
Created
10 May 2015
Updated
22 Apr 2021

Overview

IsoUSBRS422 is an open-source printed circuit board by alperyazar, from the alperyazar/isoUSBRS422 repository on GitHub. It is a 2-layer board of 49.8 × 49.8 mm with 69 parts on 38 nets, routed with 511 tracks and 53 vias.

It is built around the SN74LVC2T45DCU, FT230XQ-R and PSM712-LF-T7-L, with the MF-MSMF050-2 and MI0805K601R-10 among its other parts. Its parts include 26 capacitors, 20 resistors, 5 ICs, 5 diodes and 4 connectors. It belongs with the interfaces and adapters boards of this library.

Main components

5

README

Readme.md

isoUSBRS422

Links:

:information_source: isoUSBRS422v1 is on EEVblog Mailbag and Dangerous Prototypes. See On The Web section at the bottom for details.

isoUSBRS422 is an isolated USB <-> RS422/RS485 converter board (~5x5 cm). It should work with Windows, Linux and MacOSX (not fully tested for all operating systems by me).

THIS PROJECT IS PUBLISHED UNDER CC BY-NC-SA 4.0 LICENSE

AS IS, ABSOLUTELY NO WARRANTY

Features

Here is the summary of features in “catalog” style:

Summary of isoUSBRS422 features

Summary of isoUSBRS422 features

Here is the introduction video:

Part 1 - Features | isoUSBRS422v1 (with Subtitles)

  • Isolated 5000 Vrms (IC specification, not tested by me)
  • 4 different modes RS-422, RS-485 4-wire, RS-485 2-wire, RS-485 2-wire w/echo suppression
  • 5 cm x 5 cm, 2-layers PCB
  • 4 x 2.7 mm diameter mounting holes Electrically floating
  • Baud Rate: 300 bps - 3 Mbps Baud Rate = 3000000 / (n + x) where ‘n’ can be any integer between 2 and 16,384 and ‘x’ can be a sub-integer of the value 0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, or 0.875. When n = 1, x = 0, i.e. baud rate divisors with values between 1 and 2 are not possible.
  • Powered from USB port No external power supply is required. 5V from USB port is sufficient to operate the device.
  • USB overcurrent protection Yes, by a polyfuse
  • RS-422/RS-485 line protection Yes, it should meet IEC 61000-4-2, 61000-4-4 and IEC 61000-4-5 (IC specification, not tested by me)
  • Supported OS: Windows, Linux, MacOSX
  • Various termination options Different termination topologies can be selected by changing some passives on the component side using solder and iron! (Sorry, no dip switches)
  • Screw terminals for RS-422/RS-485 side
  • LED indicators: Power, Transmit, Receive

What is isoUSBRS422?

As I said, basically it is an USB ↔ RS-422/RS-485 converter board. It can be used to communicate devices with RS-422/RS-485 interface by using a USB port of PC. Also, ground of USB port is isolated from ground of RS-422/RS-485 channel. It may help you to prevent ground loops in large systems. See Galvanic isolation for further explanation. I will explain technical details later.

isoUSBRs422 is my first open source hardware and also KiCad experience. I did some boards for my daily job previously, but I never published them in public domain. So, I decided to do "something" to gain experience about open source publishing and low cost PCB production. Here there are some photos:

1.jpg 2.jpg 3.jpg 4.jpg 5.jpg

Why

Why did I design an isolated USB ↔ RS-422/RS-485 converter board?

As I explained previously, I wanted to design and publish "something". I use USB ↔ RS-422 converter devices for my daily job heavily. I checked PCB manufacturers and decided to try Dirtypcbs. Dimension limit for the cheapest option is 5 cm x 5 cm and I decided to stick to this limit. I thought that I can design an isolated USB <-> RS-422 converter board within in this size limit and use it for my daily job. So I did it.

Why did I chose the name isoUSBRS422? Does this board support RS-485 in addition to RS-422, right?

Yes, it supports both protocols. My initial goal was designing an isolated USB ↔ RS-422 converter board. Because I use RS-422 mainly not RS-485. However after design I noticed that it can also be used as an RS-485 converter. Also a name like isoUSBRS422-485 is quite long for a board name.

Why did I use KiCad?

Couple of years ago, I designed 3 different boards for my project design course in collage using DipTrace. DipTrace is great and I would continue to use it if I didn’t decide to publish my project and make it open source. DipTrace has freeware version for non-commercial users. However, this version has limitation on number of total pins on a single PCB. I think that software used for an open source project should be free (as in beer and freedom) as much as possible. Also, I had to create some parts in library for this project. If I use DipTrace, later I may hit the pin limit for my other projects and I have to move another software. For these reasons, I eliminate Eagle. I think that, it is easier to learn and use DipTrace than Eagle.

From free PCB design softwares, I tried gEDA and KiCad. I encountered some stability issues in gEDA then I selected to use KiCad. This is my first KiCad and experience and now I am happy with my decision. I recommend KiCad. It has quite good documentation and there are great videos on YouTube explaining almost all aspects of the software. Also there are active helping forums on the internet.

Why the heck did I select a USB chip from FTDI? Don’t I know that they did stupid things in the past? Am I supporting them?

Yes, I know and I am not an FTDI fanboy. For those who don’t know the subject:

EEVblog #676 - RANT: FTDI Bricking Counterfeit Chips!

and

http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/

started to desing and selected to components prior to FTDI thing. I learned the issue in the beginning of the layout. I was very excited to finish my board and decided to finish it. So, that’s the story. Now, I can’t proudly say that “Hey, I am using an FTDI chip on my board”. I know that, many of hackers and makers encountered problems due to stupidity of this company. Since this is an open source project and aims makers especially, I am not very happy with this chip. But this is the case.

Do It Yourself (DIY)

by-nc-sa 4.0

:warning: AS IS, ABSOLUTELY NO WARRANTY. TAKE YOUR OWN RISK

Your read the features list and are fascinated about the project (LOL). You look forward to make your own isoUSBRS422 board and use it in your projects. Here is the good new: This is an open source project and you can make your own copy for non-commercial purposes!

:information_source: This project is published under CC BY-NC-SA 4.0 license. It means that you can make your own copy for non-commercial purposes. Even, you can modify the project files, ex. PCB, if you refer to this original work properly and redistribute your version with the same license. See https://creativecommons.org/licenses/by-nc-sa/4.0/ for further details. Contact if you have any questions.

:information_source: As I said in videos (see below), I may have some extra PCBs or even components in my hand. I may able to send you if you REALLY want to make your own board, free of charge. Please contact if you are interested in.

Video Tutorials

I prepared 6 tutorial videos with total runtime ~1.5 hours (!) for makers. Below, videos are given in order. Click images to watch the videos. Also you can find a ordered playlist here: https://www.youtube.com/watch?v=EZh2zi6m1yI&list=PLr5LL6z9GIeGnNSeiEEnGr73dqn5cAOdi

Part 0 - Introduction

Part 0 - Introduction | isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

Part 1 - Features

Part 1 - Features | isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

Part 2 - Project Files

Part 2 - Project Files | isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

Part 3 - Board Production

Part 3 - Board Production| isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

Part 4 - Driver Installation, Programming, Functional Verification

Part 4 - Driver Installation, Programming, Functional Verification | isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

Part 5 - Operation Modes

Part 5 - Operation Modes | isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

Part 6 - Known Issues

Part 6 - Known Issues | isoUSBRS422v1 (with Subtitles)

Click on the image to watch the video

On The Web

isoUSBRS422 project is also shown up on some websites.

Dangerous Prototypes

Blog post of Dangerous Prototypes about isoUSBRS422 project

EEVblog

isoUSBRS422 on EEVblog #833 - Mailbag

Click on the image to watch the video

isoUSBRS422v1 board is shown up in EEVblog #833 - Mailbag episode between 13:42 - 18:26.

Folder Structure

  • BOM Contains bill of materials of board

  • Driver Contains necessary drivers. Online Windows 7 (and probably newest versions) should install driver automatically. If you are running on an offline machine you may use drivers at that folder. However, I strongly recommend to get the newest driver from USB chip vendor website: http://www.ftdichip.com/Drivers/VCP.htm I won't update drivers at that folder when FTDI publishes new drivers. They are latest drivers at that time.

  • Firmware Contains profile file for utility called FT_Prog (contains in Utility folder). Once you finish isoUSBRS422 board, FT230x will not work as RS422/RS485 converter. This chip should be programmed only once. You may use the given profiles for proper operation.

  • Gerber Contains Gerber files for PCB production. You may produce exactly same board as mine using these files.

  • KiCad Contains KiCad project files. My KiCad version is (2013-07-07 BZR 4022)-stable. You should able to open project files and edit according to your needs (please consider license).

  • PCB Contains ZofzPCB (see: https://www.ayazar.com/log/2014/12/zofzpcb.html) rendered board file and some computer generated images of PCB.

  • Schematic Contains PDF of schematic.

  • Utility Some programs to program isoUSBRS422 board an test it.

You are always welcomed to contact me.

Parts

69
QtyValueFootprintReferences
12100 nFSM0603C103, C104, C108, C109, C110, C111, C116, C118, C120, C121, C124, C125
810kSM0603R106, R107, R108, R109, R110, R111, R112, R120
74.7 uFSM0805C105, C107, C112, C115, C122, C123, C126
60SM0603R113, R114, R116, R117, R118, R119
4VAL**Hole_2mm8_6mm0Hole_2mm8_6mm0, Hole_2mm8_6mm0, Hole_2mm8_6mm0, Hole_2mm8_6mm0
310 nFSM0603C106, C113, C117
3KLE3MM5KLE3mm5J102, J103, J104
3SN74LVC2T45R_PDSO_G8U102, U103, U105
210 uFSM1206C114, C119
227SM0603R101, R102
2270SM0603R104, R105
247 pFSM0603C101, C102
2PSM712LFT7SOT23D104, D105
1121SM0603R115
1330SM0603R103
1ADM2682ESO16WU104
1FT230XSSOP16U101
1LED_PWRCR_10_LEDD101
1LED_RXCR_10_LEDD103
1LED_TXCR_10_LEDD102
1MF-MSMF050-2MS_MSMF_Style_1TH101
1MI0805K601R-10SM0805FB101
1REFayazarVAL
1REFturkiye_15mmVAL
1REFusb_logo_4mmVAL
1USBUSB_BJ101

Similar boards

  • 2 layers111.1 × 61.2 mmSTM32F4-UCC, the printed circuit board in 3D

    STM32F4-UCC

    UCC-LCRS/STM32F4Discovery-expansion

    Placa de expancion para la plataforma STM32F4Discovery.

    121 partsBSD-3-Clause
  • 2 layers142 × 23 mmMassue bento v4, the printed circuit board in 3D

    Massue bento v4

    benkuper/BenTo-Legacy

    Legacy repository for the former BenTo-Club project

    101 parts1GPL-3.0
  • 4 layers220 × 100 mm3U220-Support, the printed circuit board in 3D

    3U220-Support

    PTrUNB/3U220mm-Odoird-H2-H3-PSU

    Basic DCDC 2.8 to 48VDc power supply included

    198 parts
  • 2 layers95 × 95 mmRETRO EP4CE15, the printed circuit board in 3D

    RETRO EP4CE15

    land-boards/lb-boards

    land-boards - Board Designs

    43 parts31
  • 4 layers160 × 100 mmK30p VME, the printed circuit board in 3D

    K30p VME

    transistorfet/retroverse

    A collection of VME-based hardware and software for modular computers

    133 parts17

Questions

How big is the IsoUSBRS422 PCB?

It measures 49.8 × 49.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IsoUSBRS422 use?

69 parts, built around the SN74LVC2T45DCU, FT230XQ-R, PSM712-LF-T7-L and MF-MSMF050-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IsoUSBRS422 KiCad files?

From the alperyazar/isoUSBRS422 repository on GitHub, at the commit this page was made from: the board is KiCad/isoUSBRS422.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the IsoUSBRS422 design in my own project?

Its repository states no licence, so its author keeps all rights: ask alperyazar before reusing the design.