4 layers13 × 9.4 mm
Qomu board
QuickLogic-Corp/qomu-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
52 parts43CC-BY-SA-4.0
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 13 layers38.5 × 38.5 mm
Xbox Charge
Redherring32/100W-Charging-PCB
100W USB C PD Lithium Ion charging PCB based on the TPS25750D and BQ25713
90 parts43 - 2 layers31.9 × 36 mm
Lemon pcb swizzle
rianadon/Cosmos-Keyboard-PCBs
Open-Source keyboard PCB designs for the Cosmos Keyboard Generator
63 parts43 - 2 layers164.5 × 89.5 mm
- 2 layers223.1 × 94.9 mm
- 2 layers246.5 × 92.8 mm
Bykeeb
sadekbaroudi/bykeeb
This is a 36 key wireless keyboard using a seeed xiao nrf52840 controller, supporting choc, gateron low profile, and MX switches.
93 parts43 - 2 layers93.4 × 45.7 mm
- 2 layers101.6 × 53.3 mm
- 2 layers13 × 1.4 mm
PicoX7
SloeComputers/picoX7
Software simulation of the Yamaha DX7 with a MIDI interface for the Raspberry Pi Pico
31 parts43MIT - 4 layers45 × 25 mm
Rp2350 stamp xl
solderparty/rp2350_stamp_xl_hw
The Stamp was created to allow you to use the Raspberry Pi RP2350B in your designs without having to solder small-pitch QFN chips or worry about lots of external circuitry.
95 parts43 - 2 layers51 × 23.1 mm
Feather rak3172
teapotlaboratories/feather-rak3172
Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board
53 parts43MIT - 4 layers119 × 73.9 mm
Fw16 oculink8i
Terrails/FW16-OCuLink
The schematic in itself is pretty simple. You only need to connect the TX and RX PCIe lanes to the correct pins of the OCuLink connector.
55 parts43MIT - 2 layers203.2 × 254 mm
Production red line new silk
tomunderwood99/CharlieBoard
An open-source PCB map showing Boston's subway system
48 parts43MIT - 2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers40 × 24 mm
- 2 layers285.8 × 123.8 mm
Gingham
yiancar/gingham_usbc_pcb
A 60% throughole keyboard with USBC. Inspired by the Plaid
173 parts43 - 4 layers94 × 94 mm
- 2 layers62 × 46 mm
HANmodule
Asbjoern/Kamstrup-Radius-Interface
ESP8266 interface for Kamstrup (Radius provided) electricity meter
46 parts42 - 2 layers22.9 × 50.8 mm
Penguino STM32WL LoRa E5
azerimaker/Penguino-STM32WL-LoRa-E5
This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
58 parts42 - 2 layers74.9 × 77.5 mm
- 2 layers14 × 110 mm
- 4 layers20.5 × 50.8 mm
- 2 layers219.1 × 76.2 mm
- 2 layers24.9 × 24.9 mm
