Skip to the content
2 layers100 × 100 mmMist1010, the printed circuit board in 3D

10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
273
Nets
279
Pads
1,087
Tracks, vias
3,399, 843
Pours
7
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
20 Aug 2021
Updated
20 May 2025

Overview

Mist1010 is an open-source printed circuit board by UzixLS, from the UzixLS/mist1010-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 273 parts on 279 nets, routed with 3,399 tracks and 843 vias.

It is built around the AT91SAM7S256-AU-001, ATTINY45-20SU and EP3C25E144I7, with the 74AHCT1G125DBV, ESP-12E and ESP-01 among its other parts. Its parts include 101 resistors, 97 capacitors, 20 connectors, 14 ICs and 6 diodes. It belongs with the fPGA and programmable logic boards and the ESP8266, AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.

Main components

12

README

README.md

MIST.1010

10x10cm PCB variant of MIST FPGA project

photo

photo

[More photos]

Tech specs:

  • EP3C25E144 FPGA
  • 32/64Mb SDRAM
  • VGA/RGB video output
  • Composite video + audio output via 3.5 jack connector (raspberry-pi compatible pinout)
  • 4xUSB ports for keyboard, mouse and joysticks
  • 2xDB-9 ports for Amiga mouse and joysticks
  • SD/microSD card slot
  • RTC (clock) with battery
  • Tape input / output
  • ESP8266 WiFi module
  • MIDI input and output (starting from rev.C)
  • Type C (starting from rev.D) or MicroUSB power supply
  • Board optimized for G738 and G706 cases

Some random photos: link

Changelog

  • Rev.A - first revision. Please note the errata.
  • Rev.A1:
    • fixed all rev.A issues
    • LM3940IS-3.3 replaced to NCP1117-3.3
    • sound output circuit has been replaced with the original one from the MIST 1.3 circuit
    • C39, C40, C80 tantalum capacitors has been replaced by aluminum electrolytic capacitors
    • added ARM's "erase" testpoint
    • removed useless internal speaker
  • Rev.A2:
    • C41, C68, C69 10uf ceramic capacitors has been replaced with 22uf tantalum
    • added C74 ceramic capacitor near ESP-01 module
  • Rev.B:
    • added ESP-12E/F footprint (ESP-01 is still an option)
    • added MIDI input and output
    • removed U11 - AD724 encoder
    • added resistors-based CVBS (Y+C) video circuit
    • added JP4 solder jumper to disconnect CVBS circuit from 3.5mm jack
    • added U16 buffer with dedicated power source U17 for audio 1-bit DAC
    • added USB 2.54mm header
    • tuned SDRAM traces length for better match with MIST v1.3 PCB
    • changed U6 (attiny) footprint from DIP to SOIC
    • changed Y1 and Y2 footprints from THT to SMD
    • changed 1117-3.3 footprint from TO-252-2 to SOT-223-3
    • added U12 dedicated +3.3V power source for SD card and WiFi
    • 3mm front leds replaced by 5mm
    • R38 (VGA's +5V 0Ω resistor) has been replaced by solder jumper
    • changed tape header pinout
    • pcb corners are rounded now
    • experimental reset circuit based on MAX809
    • various changes in board layout
  • Rev.C:
    • used USB Type C instead of Micro USB
    • PJ-320 3.5mm jack replaced by PJ-322
    • added solder jumper to select 3.5mm jack CVBS pinout
    • improved power distribution for FPGA chip
    • removed U16 buffer for DAC as it didn't bring any benefits
    • marked C27 and C28 as DNP
    • reverted to old reset circuit
    • various minor changes in board layout
  • Rev.C1:
    • changed R47 from 220Ω to 1kΩ to reduce power led brightness
    • slightly moved C87 and C89

Useful links

  • MIST wiki: link
  • MIST cores and firmwares: link

Parts

273
QtyValueFootprintReferences
49100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3, C4, C22, C23, C24, C30, C31, C32, C35, C36, C37, C38, C42, C43, C44, C45 +33
1710kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3, R4, R44, R52, R55, R59, R66, R67, R73, R74, R75, R100, R109, R110, R111 +1
1410uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C18, C19, C25, C26, C29, C33, C34, C74, C84, C85, C86, C88, C90
144.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR48, R50, R51, R53, R60, R61, R62, R63, R64, R68, R69, R70, R71, R72
1122Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6, R12, R13, R14, R27, R29, R30, R54, R56, R57
101.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR16, R17, R23, R25, R34, R35, R77, R78, R84, R85
7100uCapacitor_SMD:CP_Elec_5x5.9C11, C12, C39, C40, C80, C87, C89
61kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR15, R22, R33, R76, R83, R101
6220Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR45, R46, R47, R106, R107, R108
518kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR21, R32, R41, R82, R90
52.2kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR18, R26, R37, R79, R86
54.3kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR19, R28, R39, R80, R87
59.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR20, R31, R40, R81, R88
5Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1, J3, J13, J14, J21
41.5kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R8, R24, R49
41uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC51, C52, C63, C92
422uCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolderC41, C68, C69, C91
44.7nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC13, C14, C82, C83
4560Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR10, R11, R99, R104
4BC817Package_TO_SOT_SMD:SOT-23Q1, Q3, Q4, Q6
4Screw M3 dk=5mm L=4mmmy:MountingHole_3.2mm_M3_dk5.2mm_MaskH1, H2, H3, H4
4USB_AConnector_USB:USB_A_Wuerth_614004134726_HorizontalJ5, J6, J7, J8
310pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6, C15, C16
31N4148WDiode_SMD:D_SOD-123D4, D5, D6
31uInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1, L2, L3
3PJ-392Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ11, J19, J20
3Push angle button, 6x6x7mm or 6x6x8mmButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW3, SW4, SW5
2100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR42, R43
2100pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC20, C21
215pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7, C8
21nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C9
2300pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC77, C78
25.1kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR38, R89
26.8pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC27, C28
26.8uInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL5, L6
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12, J15
2JumperConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1, JP2
2LD1117AS33TRPackage_TO_SOT_SMD:SOT-223-3_TabPin2U8, U12
2TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2
10.2AFuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolderF2
11.1AFuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolderF1
110nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC10
112 MHzmy:Oscillator_SMD_7050_7.0x5.0mmX2
1120Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7
11775485-1 or S8401-46my:CR2032VBT1
118.432 MHzCrystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSolderingY1
12.2uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
12.7k 1%Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR36
127 MHzmy:Oscillator_SMD_7050_7.0x5.0mmX1
132768 Hz 12.5pFCrystal:Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSolderingY2
1470Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR65
1470kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR58
1680Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR102
174AHCT1G125DBPackage_TO_SOT_SMD:SOT-23-5_HandSolderingU13
1AT91SAM7S256-AUPackage_QFP:TQFP-64_10x10mm_P0.5mmU2
1ATtiny45-20SUPackage_SO:SOIC-8W_5.3x5.3mm_P1.27mmU6
1B2B-XH-AConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ17
1DB15_Female_HighDensity_MountingHolesConnector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mmJ9
1DS1307Z+Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU7
1EP3C25E144my:ALTERA-QFP-145U3
1ESP-01Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ18
1ESP-12ERF_Module:ESP-12EU14
1FE2.1-CQFP48APackage_QFP:LQFP-48_7x7mm_P0.5mmU5
1G738 or G706my:g738-g706N1
1H11L1SMPackage_DIP:SMDIP-6_W9.53mmU11
1IRLML6402Package_TO_SOT_SMD:SOT-23Q2
1LD1117AS12TRPackage_TO_SOT_SMD:SOT-223-3_TabPin2U9
1LD1117AS25TRPackage_TO_SOT_SMD:SOT-223-3_TabPin2U10
1LED_GreenLED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD3
1LED_RedLED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD1
1LED_YellowLED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mmD2
1LOGOmygraphic:jack35_4pinG***
1MAX3421EPackage_QFP:LQFP-32_5x5mm_P0.5mmU4
1MEM2055-00-190-01-Amy:GCT-MEM2055-00-190-01-AJ16
1MT48LC16M16A2PCM_Package_SO_AKL:TSOP-II-54_22.2x10.16mm_P0.8mmU1
1PJ-322my:PJ-322J4
1SW_DIP_x02Button_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfileSW2
1Solder Jumpermy:SolderJumper-4_P1.3mm_OpenJP4
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
1TE 041021-4my:SD_TE_2041021-modJ10

The 271 most common of 273 parts.

More from UzixLS/mist1010-board

3
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    271 parts43MIT
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    250 parts43MIT
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    242 parts43MIT

Similar boards

  • 2 layers40 × 40 mmHeikouBoxCore, the printed circuit board in 3D

    HeikouBoxCore

    kasamikona/HeikouBox

    A project towards running "Parallelogram" demo by lft (Linus Åkesson).

    28 parts2
  • 2 layers170 × 64 mmZx multisound, the printed circuit board in 3D

    Zx multisound

    UzixLS/zx-multisound

    ZX Spectrum soundcard for NEMOBUS/ZXBUS

    200 parts40MIT
  • 4 layers92.2 × 44 mmKarabas megabuzz, the printed circuit board in 3D

    Karabas megabuzz

    andykarpov/karabas-megabuzz

    A minimalistic FPGA soundcard for ZX Spectrum

    177 parts9MIT
  • 2 layers135.3 × 78.4 mmMseq, the printed circuit board in 3D

    Mseq

    MF-Room/mseq_pcb

    KiCad 10 hardware design for MSeq embedded, the microcontroller implementation of the MSeq MIDI sequencer.

    93 parts1CERN-OHL-S-2.0
  • 2 layers46 × 39 mmMidiboard, the printed circuit board in 3D

    Midiboard

    mlainez/midiboard

    A small MIDI interface board: opto-isolated MIDI IN, buffered MIDI OUT, optional hard THRU, a 3V3/5V slide switch, and on-board footprints for two right-angle DIN-5 jacks.

    20 partsCC-BY-SA-4.0
  • 4 layers20 × 37.7 mmFm1-midi dongle., the printed circuit board in 3D

    Fm1-midi dongle.

    wero1414/fm1-midi-dongle.

    A small stick that plugs into the M-VAVE FM-1's USB-C port and gives it a TRS MIDI OUT and an isolated TRS MIDI IN.

    31 parts
  • 2 layers35.6 × 27.3 mmBeambreak, the printed circuit board in 3D

    Beambreak

    frc971/electrical

    This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.

    12 parts3Apache-2.0

Questions

How big is the Mist1010 PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mist1010 use?

273 parts, built around the AT91SAM7S256-AU-001, ATTINY45-20SU, EP3C25E144I7 and 74AHCT1G125DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mist1010 KiCad files?

From the UzixLS/mist1010-board repository on GitHub, at the commit this page was made from: the board is pcb/rev.C/mist1010.kicad_pcb and its schematic pcb/rev.A/mist1010.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mist1010 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).