Skip to the content
12345678

ESP-01

Ai-ThinkerExtended

-20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHS

Part id
ai-thinker/ESP-01
Category
WiFi Modules
Package
插件
Pins
8
In stock
68 at JLCPCB (C503581)
Used on
56 open-source boards

Overview

The ESP-01 is a wiFi Module made by Ai-Thinker in a 插件 package with 8 pins. -20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHS.

PCBKit's library has its KiCad symbol (RF_Module:ESP-01, from KiCad's library) and its footprint (RF_Module:ESP-01, from KiCad's library), ready for a KiCad board. 68 are in stock at JLCPCB (part C503581). 56 open-source boards in 45 repositories on GitHub use it.

Symbol

1GND2IO23IO04RXD/IO35TXD/IO16EN7RST8VCC
RF_Module:ESP-01From KiCad's library

Footprint

12345678
RF_Module:ESP-01From KiCad's library

From the datasheet

4
Supply, least
3 V · supply, recommended operating, min · p. 2
Supply, most
3.6 V · supply, recommended operating, max · p. 2
Works from
-20 °C · operating ambient, min · p. 2
Works up to
85 °C · operating ambient, max · p. 2

Pinout

8
The pins of the ESP-01
PinNameType
1GNDPower in
2IO2Input/output
3IO0Input/output
4RXD/IO3Input/output
5TXD/IO1Input/output
6ENInput
7RSTInput
8VCCPower in

Open-source boards using it

56See all 56
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    273 parts43MIT
  • 2 layers50 × 100 mmDMX CTRL, the printed circuit board in 3D

    DMX CTRL

    michar71/DMX_CTRL

    DMX512 Controller for light installations based on Bluepill STM32F103 Board

    46 parts12
  • 2 layers68.6 × 95.3 mmMultitool, the printed circuit board in 3D

    Multitool

    cnlohr/stm32f042_fun

    My fun repo for the STM32f042

    90 parts8
  • 2 layers30 × 17 mmMK312WIFI, the printed circuit board in 3D

    MK312WIFI

    Rangarig/MK312WIFI

    A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport

    7 parts7GPL-3.0
  • 4 layers100 × 50 mmChronolog, the printed circuit board in 3D

    Chronolog

    slemanz/chronolog

    STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.

    95 parts5
  • 2 layers102.9 × 52.1 mmUarm, the printed circuit board in 3D

    Uarm

    beckdac/uArm-MicroView-esp8266

    uArm control PCB with MicroView (Arduino w/ OLED) and esp8266 WiFi/UART bridge

    14 parts4GPL-3.0
  • 2 layers204.5 × 121.9 mmCt800-pcb, the printed circuit board in 3D

    Ct800-pcb

    d3rvita/ct800-pcb

    PCB for the CT800 chess computer

    91 parts4MIT
  • 2 layers98 × 91.1 mmSoil Sensor Hub, the printed circuit board in 3D

    Soil Sensor Hub

    ArtoLabs/Sensi-pot

    Collection of modules for indoor/outdoor gardening automation and environmental control

    78 parts3MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ESP-01?

Yes. The symbol is RF_Module:ESP-01 and the footprint RF_Module:ESP-01, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP-01?

插件, with 8 pins. Its footprint is drawn on this page.

Where is the ESP-01 datasheet?

Ai-Thinker publishes it: the Datasheet link on this page opens it.

Where can I order the ESP-01?

JLCPCB lists it as part C503581, with 68 in stock; the sellers' links on this page open their listings.

What can replace the ESP-01?

Parts like it in the library: the ESP-01S by Ai-Thinker, the ESP32-WROOM-32E-N4 by Espressif Systems, the ESP-12F(ESP8266MOD) by Ai-Thinker and the ESP32-WROOM-32 by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESP-01?

56 boards in 45 repositories on GitHub; the most starred are listed on this page, with their KiCad files.