Skip to the content
12345678

ESP-01S

Ai-ThinkerExtended

-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n、TCP、IP ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHS

Part id
ai-thinker/ESP-01S
Category
WiFi Modules
Package
WIFIM-TH
Pins
8
In stock
603 at JLCPCB (C503582)
Used on
9 open-source boards

Overview

The ESP-01S is a wiFi Module made by Ai-Thinker in a WIFIM-TH package with 8 pins. -20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n、TCP、IP ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHS.

PCBKit's library has its KiCad symbol (RF_Module:ESP-01, from KiCad's library) and its footprint (RF_Module:ESP-01, from KiCad's library), ready for a KiCad board. 603 are in stock at JLCPCB (part C503582). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1GND2IO23IO04RXD/IO35TXD/IO16EN7RST8VCC
RF_Module:ESP-01From KiCad's library

Footprint

12345678
RF_Module:ESP-01From KiCad's library

Pinout

8
The pins of the ESP-01S
PinNameType
1GNDPower in
2IO2Input/output
3IO0Input/output
4RXD/IO3Input/output
5TXD/IO1Input/output
6ENInput
7RSTInput
8VCCPower in

Open-source boards using it

9See all 9
  • 2 layers142.6 × 85.1 mmLineFollower Speedy-, the printed circuit board in 3D

    LineFollower Speedy-

    Club-robotica-UDLSB/LineFollower-Speedy-

    Documentación del desarrollo del Seguidor de línea (El speedy)

    89 partsGPL-3.0
  • 2 layers63.1 × 35.3 mmPcb stm32, the printed circuit board in 3D

    Pcb stm32

    ctron/drogue-device-thermometer

    12 parts
  • 2 layers36 × 17 mmTasmotaLED, the printed circuit board in 3D

    TasmotaLED

    Ennar1991/TasmotaLED

    Simple 12V LED strip driver based on ESP-01S board running Tasmota

    15 parts
  • 2 layers80 × 80 mmBlinkenlights, the printed circuit board in 3D

    Blinkenlights

    eurovibes/blinkenlights

    A ESP based LED backlight

    61 parts
  • 2 layersDFC77 ESP01, the printed circuit board in 3D

    DFC77 ESP01

    kev-m/DFC77

    A personal project to generate a local DCF77-compatible signal for nearby radio-controlled clocks.

    19 parts
  • 2 layers80 × 40 mmDiesel heater black pill, the printed circuit board in 3D

    Diesel heater black pill

    peakhunt/chinese-diesel-heater-black-pill

    stm32f4 based chinese diesel heater

    32 partsMIT
  • 2 layers74.9 × 58.4 mmBed occupancy, the printed circuit board in 3D

    Bed occupancy

    thorio/esphome-projects

    collection of open home automation projects

    16 parts29GPL-3.0
  • 2 layers41.9 × 38.1 mmDoorbell sensor, the printed circuit board in 3D

    Doorbell sensor

    thorio/esphome-projects

    collection of open home automation projects

    17 parts29GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ESP-01S?

Yes. The symbol is RF_Module:ESP-01 and the footprint RF_Module:ESP-01, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP-01S?

WIFIM-TH, with 8 pins. Its footprint is drawn on this page.

Where is the ESP-01S datasheet?

Ai-Thinker publishes it: the Datasheet link on this page opens it.

Where can I order the ESP-01S?

JLCPCB lists it as part C503582, with 603 in stock; the sellers' links on this page open their listings.

What can replace the ESP-01S?

Parts like it in the library: the ESP-01 by Ai-Thinker, the ESP32-WROOM-32E-N4 by Espressif Systems, the ESP-12F(ESP8266MOD) by Ai-Thinker and the ESP32-WROOM-32 by Espressif Systems. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ESP-01S?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.