2 layers142.6 × 85.1 mm
LineFollower Speedy-
Club-robotica-UDLSB/LineFollower-Speedy-
Documentación del desarrollo del Seguidor de línea (El speedy)
89 partsGPL-3.0
2 layers36 × 17 mm
TasmotaLED
Ennar1991/TasmotaLEDSimple 12V LED strip driver based on ESP-01S board running Tasmota
- Size
- 36 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 9
- Pads
- 45
- Tracks, vias
- 87, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2022
- Updated
- 25 Oct 2022
Overview
TasmotaLED is an open-source printed circuit board by Ennar1991, from the Ennar1991/TasmotaLED repository on GitHub. It is a 2-layer board of 36 × 17 mm with 15 parts on 9 nets, routed with 87 tracks and 0 vias.
It is built around the ESP-01S, AMS1117-3.3 and KIA30N06B. Its parts include 5 resistors, 4 capacitors, 3 connectors, 1 IC and 1 transistor. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
Main components
3
ESP-01S
WIFIM-TH-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n、TCP、IP ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHSAi-ThinkerWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
KIA30N06B
TO-251(IPAK)1 N-channel 2.5V 25A 30mΩ@10V 34.7W 60V TO-251(IPAK) MOSFETs ROHSKIA Semicon TechMOSFETs
README
README.mdTasmotaLED
Simple 12 V LED driver using an ESP-01S or compatible board for driving simple 12 V LED strips
Use any standard Tasmota build. I recommend using Fade and Speed commands to make the lights more pleasant.
Tasmota Template: {"NAME":"TasmotaLED","GPIO":[32,0,416,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R5 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ESP-01S | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | KIA30N06B | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | LED_OUT | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J3 |
| 1 | PWR_IN | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1 |
Similar boards
- 2 layers
DFC77 ESP01
kev-m/DFC77
A personal project to generate a local DCF77-compatible signal for nearby radio-controlled clocks.
19 parts - 2 layers41.9 × 38.1 mm
- 2 layers200 × 90 mm
- 2 layers63.1 × 35.3 mm
- 2 layers80 × 80 mm
- 2 layers80 × 40 mm
Diesel heater black pill
peakhunt/chinese-diesel-heater-black-pill
stm32f4 based chinese diesel heater
32 partsMIT - 2 layers290.1 × 130 mm
Questions
How big is the TasmotaLED PCB?
It measures 36 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TasmotaLED use?
15 parts, built around the ESP-01S, AMS1117-3.3 and KIA30N06B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TasmotaLED KiCad files?
From the Ennar1991/TasmotaLED repository on GitHub, at the commit this page was made from: the board is PCB/TasmotaLED.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TasmotaLED design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ennar1991 before reusing the design.