2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT
2 layers102.9 × 52.1 mm
uArm control PCB with MicroView (Arduino w/ OLED) and esp8266 WiFi/UART bridge
- Size
- 102.9 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 29
- Pads
- 65
- Tracks, vias
- 99, 5
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Dec 2014
- Updated
- 17 Dec 2014
Overview
Uarm is an open-source printed circuit board by beckdac, from the beckdac/uArm-MicroView-esp8266 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 102.9 × 52.1 mm with 14 parts on 29 nets, routed with 99 tracks and 5 vias.
It is built around the ESP-01. Its parts include 4 ICs, 1 capacitor, 1 resistor and 1 connector. It belongs with the radio and wireless and interfaces and adapters boards and the ESP8266 boards of this library.
Main components
1README
README.mduArm-MicroView-esp8266
uArm control PCB with MicroView (Arduino w/ OLED) and esp8266 WiFi/UART bridge
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SERVO | Pin_Headers:Pin_Header_Straight_1x03 | CONN3, CONN4, CONN5, CONN6, CONN7 |
| 2 | FTDI_Cable | Pin_Headers:Pin_Header_Angled_1x06 | CONN1, CONN2 |
| 2 | LM2596_Buck_Board | uArm:LM2596_BUCK_BOARD | U1, U4 |
| 1 | 100nF | Discret:C1 | C1 |
| 1 | 10k | Discret:R1 | R1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | MicroView | uArm:MICROVIEW | U2 |
| 1 | esp-01 | uArm:ESP_01 | U3 |
Similar boards
- 2 layers50 × 100 mm
DMX CTRL
michar71/DMX_CTRL
DMX512 Controller for light installations based on Bluepill STM32F103 Board
46 parts12 - 2 layers68.6 × 95.3 mm
- 2 layers30 × 17 mm
MK312WIFI
Rangarig/MK312WIFI
A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport
7 parts7GPL-3.0 - 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers204.5 × 121.9 mm
- 2 layers98 × 91.1 mm
Soil Sensor Hub
ArtoLabs/Sensi-pot
Collection of modules for indoor/outdoor gardening automation and environmental control
78 parts3MIT - 2 layers48.9 × 33 mm
Questions
How big is the Uarm PCB?
It measures 102.9 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uarm use?
14 parts, built around the ESP-01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uarm KiCad files?
From the beckdac/uArm-MicroView-esp8266 repository on GitHub, at the commit this page was made from: the board is uarm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uarm design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).