

Multitool
My fun repo for the STM32f042
- Size
- 68.6 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 69
- Pads
- 339
- Tracks, vias
- 1,092, 51
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2020
- Updated
- 3 Mar 2021
Overview
Multitool is an open-source printed circuit board by cnlohr, from the cnlohr/stm32f042_fun repository on GitHub. It is a 2-layer board of 68.6 × 95.3 mm with 90 parts on 69 nets, routed with 1,092 tracks and 51 vias.
It is built around the ESP-01, MT2492 and 74LVC02APW, with the NUP4202W1 and WS2813C among its other parts. Its parts include 27 resistors, 16 capacitors, 16 connectors, 10 ICs and 9 diodes. It belongs with the ESP8266 and STM32 boards of this library.
Main components
5ESP-01
插件-20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHSAi-ThinkerWiFi ModulesMT2492
SOT-23-6-40℃~+85℃@(TA) 1 2A 4.5V~16V 600kHz Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters74LVC02APW
TSSOP-14-40℃~+125℃ 1.08V~2V 1.2V~3.6V 120mV~800mV 2 24mA 24mA 4 4.4ns@3.3V,50pF 40uA 74LVC Series NOR Gate TSSOP-14 Logic Gates ROHSNexperiaLogic GatesNUP4202W1
SC-88-40℃~+125℃ 1.5pF、3pF 14.5V 28A@8/20us 500W 5V 5uA 6V ESD IEC 61000-4-2 SC-88 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)WS2813C
SMD5050-6P0.6mA 1.65mm 2kHz 5mm 800Kbit/s B:65mcd、R:280mcd、G:500mcd R:620nm~630nm、G:510nm~525nm、B:460nm~475nm 集成智能反向连接保护功能 SMD5050-6P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
README.mdstm32f042_fun
My fun repo for the STM32f042. Feel free to rifle through. All the projects are incomplete, but mostly work.
Check out my IO list: https://docs.google.com/spreadsheets/d/1DyMCKiVg4tmwGgn1U_OD7lgiobow0eRoh-zJ0Q15YpQ/edit?usp=sharing
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8, R11, R13, R14, R15, R21, R23, R25 |
| 8 | 22nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C7, C8, C10, C11, C12 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R9, R10, R12 |
| 5 | 10uH | Inductor_SMD:L_2816_7142Metric | L1, L3, L4, L5, L6 |
| 5 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3, R20, R26, R27 |
| 4 | 10u25v | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4, C9, C25 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R16, R18, R22, R24 |
| 4 | 3402 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | MNT | MountingHole:MountingHole_5.3mm_M5_Pad_Via | J17, J18, J19, J20 |
| 3 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C19, C23, C24 |
| 3 | 5.1V | Diode_SMD:D_SOD-123 | D4, D7, D8 |
| 2 | 12V Zener | Diode_SMD:D_SOD-123 | D5, D23 |
| 2 | 27k | Resistor_SMD:R_0603_1608Metric | R1, R19 |
| 2 | 3v6 | Package_TO_SOT_SMD:SOT-23 | U4, U10 |
| 2 | LOADSW | Package_TO_SOT_SMD:SOT-23-6 | U8, U9 |
| 2 | VDDS | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | J7, J16 |
| 1 | .051 Ohm 1% | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | 74LVC02APW | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | AVR | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J9 |
| 1 | BLU | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | BOOT0 | kicad:TACTILE10B | SW1 |
| 1 | ESP-01 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical_SMD | J15 |
| 1 | GRN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | INA181A3 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | MT2492 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | NUP4202 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
| 1 | PADAUK | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD | J8 |
| 1 | PNP | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SAO | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical_SMD | J6 |
| 1 | SELF_PGM | kicad:RIBBON6SMT_POGO_OR_IDC | J2 |
| 1 | SP485 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | STM32F042 | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SUBCFG | kicad:TACTILE10B | SW2 |
| 1 | UNIVERSAL | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical_SMD | J3 |
| 1 | USB | kicad:USBMicroB-U253-051T-4BH89-F1B | J1 |
| 1 | VPPS | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | J5 |
| 1 | WS2813 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J14 |
| 1 | WS2813 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D3 |
| 1 | WSOUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J4 |
More from cnlohr/stm32f042_fun
2- 2 layers75 × 75 mm

- 2 layers69.6 × 62 mm

Similar boards
- 2 layers99 × 99.8 mm

- 4 layers102.6 × 107.3 mm

- 2 layers41.3 × 110.5 mm

A500 Simple SPI V1.3
Mathesar/a500-simple-spi-hardware
Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller
26 parts13 - 2 layers39.4 × 68.6 mm

- 4 layers58.4 × 101.9 mm

Up5k osc
emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.
137 parts36MIT - 2 layers139.7 × 88.9 mm

- 2 layers466 × 8 mm

Hc245t bypass esd panel
cyber-murmel/chubby-hat
a PCB that turns the Colorlight 5A-75B into an easy to use development FPGA platform for cheap
405 parts22MIT - 2 layers84 × 26 mm

Questions
How big is the Multitool PCB?
It measures 68.6 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multitool use?
90 parts, built around the ESP-01, MT2492, 74LVC02APW and NUP4202W1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multitool KiCad files?
From the cnlohr/stm32f042_fun repository on GitHub, at the commit this page was made from: the board is multitool-attempt-at-can/multitool.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multitool design in my own project?
Its repository states no licence, so its author keeps all rights: ask cnlohr before reusing the design.