Boards using the ESP-01

56 boards

Boards in 45 GitHub repositories, designed in KiCad, that use the ESP-01 by Ai-Thinker (-20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHS). See how each wires it, with its parts, size, README and files; the ESP-01’s symbol, footprint and pinout are on its own page.

2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT
2 layers50 × 100 mm
DMX CTRL
michar71/DMX_CTRL
DMX512 Controller for light installations based on Bluepill STM32F103 Board
46 parts12
2 layers68.6 × 95.3 mm
Multitool
cnlohr/stm32f042_fun
My fun repo for the STM32f042
90 parts8
2 layers30 × 17 mm
MK312WIFI
Rangarig/MK312WIFI
A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport
7 parts7GPL-3.0
4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5
2 layers102.9 × 52.1 mm
Uarm
beckdac/uArm-MicroView-esp8266
uArm control PCB with MicroView (Arduino w/ OLED) and esp8266 WiFi/UART bridge
14 parts4GPL-3.0
2 layers204.5 × 121.9 mm
Ct800-pcb
d3rvita/ct800-pcb
PCB for the CT800 chess computer
91 parts4MIT
2 layers98 × 91.1 mm
Soil Sensor Hub
ArtoLabs/Sensi-pot
Collection of modules for indoor/outdoor gardening automation and environmental control
78 parts3MIT
2 layers48.9 × 33 mm
Esp01-motion sensor
daemondazz/esp01-motion-sensor
ESP8266-01 Based Motion Sensor
10 parts3
2 layers64.5 × 17.8 mm
ESP PogoPin Programmer
barn53/ESP-PogoPin-Programmer
ESP Programmer with PogoPins to program ESP-1, ESP-12E/F, ... modules.
36 parts2MIT
2 layers74.7 × 86.1 mm
Doorkeeper
AssociazionePrometeo/doorkeeper
Elettroserratura per IoT
30 parts1GPL-2.0
2 layers50 × 100 mm
Bluepill
attilabody/gate433
Shared parking space gate controller with 433 MHz radio
82 parts1
2 layers73.5 × 86 mm
Diy arduino esp01
averagejmc/HomeSecurity
A small local home security system that:
26 parts1
2 layers184.4 × 238 mm
MyKicadLibraries
besi/kicad-libraries
git submodule add https://github.com/besi/kicad-esp8266 lib/esp8266 git submodule add https://github.com/besi/kicad-tp4056 lib/tp4056 git submodule add https://github.com/besi/kicad-lilygo-sim lib/lilygo-sim git…
55 parts1
2 layers106 × 108 mm
RobotControl
Capstone4-33Enjoyers/RobotControl
The robot can have three control configurations
42 parts1
2 layers77.7 × 53.3 mm
Pcb dang
drovoh4k/dang
Debido a esta problemática surge DANG, un sistema de control de aforo en las clases de mi universidad. Este sistema permite saber cuánta gente hay dentro de una clase concreta y mantener una trazabilidad de las aulas en…
16 parts1
2 layers102.4 × 77.4 mm
Scheda PSE
Eduzyolo/PSE_project
This is the official repo for the PSE project
176 parts1
2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1
2 layers100.1 × 100.1 mm
Esp panel
MakersAsylumIndia/ESP8266_01_Breakout
breakout board for ESP8266-01 module.
133 parts1
2 layers38 × 16 mm
Weatherstation pcb
mrsteakhouse/weatherstation-pcb
These are the PCB schematics for the weatherstation project. It is designed to work with an ESP-01 tuned for deep sleep. The circuit is powered by any 9V power source (6xAA works best).
17 parts1BSD-3-Clause
2 layers50 × 24.5 mm
DimLED
tqlabs-in/dimled-mini
⚡ ESP-01 based smart LED dimmer powered by ESPHome
16 parts1MIT
2 layers100 × 97.1 mm
V8 (Carte 1)
CamilleRojas/Carte_Wifi

57 parts
2 layers55.5 × 57.5 mm
Tilt
dialgorithm/tilt
galvanic vestibular stimulation device
23 parts
2 layers
ESP32+DH11
duronxp/ESP32_DTH22_termo
Mini project for a remote-controlled heater with temp and humidity sensors
27 parts