duronxp/ESP32_DTH22_termoMini project for a remote-controlled heater with temp and humidity sensors
ESP32+DH11 is an open-source printed circuit board by duronxp, from the duronxp/ESP32_DTH22_termo repository on GitHub. It is a 2-layer board with 27 parts on 21 nets.
It is built around the ESP-01, BTA16-600B and DHT11, with the AMS1117-3.3, MOC3063M and IRF3205 among its other parts. Its parts include 8 resistors, 7 connectors, 5 capacitors, 4 ICs and 2 transistors. It belongs with the ESP32 and ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.01 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | Coller | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J6, J7 |
| 1 | +12 IN | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J3 |
| 1 | 0.01 | Capacitor_THT:C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 | C1 |
| 1 | 100R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 10u | Capacitor_SMD:CP_Elec_6.3x7.7 | C4 |
| 1 | 330R | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R4 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 380R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 380R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 39R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 470u | Capacitor_SMD:CP_Elec_6.3x7.7 | C5 |
| 1 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | AC-12 | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J5 |
| 1 | AC_IN | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U3 |
| 1 | BTA16-600B | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | ESP-01 | RF_Module:ESP-01 | IC1 |
| 1 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | Load | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J4 |
| 1 | MOC3063M | Package_DIP:DIP-6_W7.62mm | U2 |
27 parts, built around the ESP-01, BTA16-600B, DHT11 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the duronxp/ESP32_DTH22_termo repository on GitHub, at the commit this page was made from: the board is ESP32+DH11.kicad_pcb and its schematic ESP32+DH11.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask duronxp before reusing the design.
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
ArtoLabs/Sensi-pot
Collection of modules for indoor/outdoor gardening automation and environmental control
Rangarig/MK312WIFI
A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport
GonzaStd/classrooms-temperatures
This project consists of collecting meteorological data from several classrooms using sensors and microcontrollers. This data will be graphicated and analyzed from the perspective of thermal comfort.
RoboticsBrno/semafor
:vertical_traffic_light: Traffic light gadget for outdoor games designed for Helceletka.cz.
