2 layers100 × 100 mm
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT
4 layers153.9 × 128.7 mm
ModuCard Backplane Sixth Sense
ArthorH/ModuCard-Backplane-Sixth-Sense1Sixth sense for debugging 6 modules
- Size
- 153.9 × 128.7 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 133
- Nets
- 257
- Pads
- 1,099
- Tracks, vias
- 1,664, 1,616
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Jun 2026
- Updated
- 6 Sep 2026
Overview
ModuCard Backplane Sixth Sense is an open-source printed circuit board by ArthorH, from the ArthorH/ModuCard-Backplane-Sixth-Sense repository on GitHub. It is a 4-layer board of 153.9 × 128.7 mm with 133 parts on 257 nets, routed with 1,664 tracks and 1,616 vias.
It is built around the LM5007MM, FSUSB42UMX and AMS1117, with the FE2.1-CQFP48AT, SS510 and BC847C among its other parts. Its parts include 41 resistors, 29 capacitors, 25 diodes, 10 connectors and 5 ICs.
Main components
7
LM5007MM
MSOP-8-40℃~+125℃@(TJ) 1 2.5V~73V 380kHz 500mA 9V~75V Adjustable Buck Buck Built-in Yes MSOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
FSUSB42UMX
UFQFN-10(1.4x1.8)-40℃~+85℃ 13ns 15ns 2 2.4V~4.4V 250ps 2:1 3.7pF 3.9Ω 720MHz UFQFN-10(1.4x1.8) Analog Switches, Multiplexers ROHSonsemiAnalog Switches, Multiplexers
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
FE2.1-CQFP48AT
LQFP-48(7x7)-40℃~+85℃ 155mA 4.5V~5.5V 480Mbps 600uA 7 Hub Port power switch control、Internal regulator、Power-on reset、Overcurrent Protection、Low-power mode、ESD protection USB 2.0 LQFP-48(7x7) USB HUB Controllers ROHSTerminus TechUSB HUB Controllers
SS510
SMA(DO-214AC)-55℃~+150℃ 100V 1mA@100V 5A 850mV@5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
BC847C
SOT-23-55℃~+150℃ 1 NPN 100MHz 100mA 100nA 200mW 420 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
X322512MSB4SI
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
README
README.mdBackplane 6-th sense
Parts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13, H14, H15, H16 |
| 14 | 100nF | PCM_JLCPCB:C_0402 | C25, C26, C27, C29, C30, C31, C32, C33, C34, C36, C37, C38, C312, C313 |
| 9 | 330Ω | PCM_JLCPCB:R_0402 | R31, R32, R33, R34, R35, R36, R37, R38, R39 |
| 8 | 60R | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
| 7 | Green | PCM_JLCPCB:D_0805 | D20, D22, D24, D26, D28, D30, D32 |
| 7 | Yellow | PCM_JLCPCB:D_0805 | D21, D23, D25, D27, D29, D31, D33 |
| 6 | 09031967921 | Connector_DIN:DIN41612_R_3x32_Male_Vertical_THT | J16, J17, J18, J19, J20, J21 |
| 6 | 10kΩ | PCM_JLCPCB:R_0402 | R2, R20, R802, R804, R805, R807 |
| 5 | 10uF | PCM_JLCPCB:C_0805 | C7, C8, C9, C10, C11 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C21, C22, C23, C24 |
| 4 | LED | LED_THT:LED_D3.0mm | D9, D10, D12, D13 |
| 3 | 100kΩ | PCM_JLCPCB:R_0805 | R12, R15, R16 |
| 2 | 100kΩ | PCM_JLCPCB:R_0402 | R27, R29 |
| 2 | 100Ω | PCM_JLCPCB:R_0603 | R22, R24 |
| 2 | 10uF | PCM_JLCPCB:C_0603 | C35, C41 |
| 2 | 12pF | PCM_JLCPCB:C_0402 | C39, C40 |
| 2 | 22kΩ | PCM_JLCPCB:R_0402 | R803, R806 |
| 2 | 3kΩ | PCM_JLCPCB:R_0603 | R13, R14 |
| 2 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J6, J7 |
| 2 | FSUSB42UMX | Package_DFN_QFN:UQFN-10_1.4x1.8mm_P0.4mm | U801, U802 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | RED | Diode_SMD:D_0402_1005Metric | D1, D8 |
| 2 | Red | PCM_JLCPCB:D_0603 | D2, D34 |
| 2 | SS510 | PCM_JLCPCB:D_SMA | D5, D6 |
| 2 | SW_DIP_x03 | Button_Switch_THT:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W7.62mm_P2.54mm_LowProfile | SW5, SW6 |
| 1 | 09031967921 | Connector_DIN:DIN41612_R_3x32_Male_Horizontal_THT | J2 |
| 1 | 09031967921 | Din:09031967921 | J1 |
| 1 | 100nF | PCM_JLCPCB:C_0805 | C2 |
| 1 | 10nF | PCM_JLCPCB:C_0805 | C1 |
| 1 | 1K2 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 1kΩ | PCM_JLCPCB:R_0402 | R26 |
| 1 | 1Ω | PCM_JLCPCB:R_0603 | R17 |
| 1 | 2.7kΩ | PCM_JLCPCB:R_0603 | R30 |
| 1 | 200kΩ | PCM_JLCPCB:R_0805 | R3 |
| 1 | 2K2 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 47kΩ | PCM_JLCPCB:R_0402 | R28 |
| 1 | AMS1117 | PCM_JLCPCB:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U3 |
| 1 | BC847C | PCM_JLCPCB:Q_SOT-23 | Q1 |
| 1 | FE2.1 | PCM_JLCPCB:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | FNR6045S101MT 100uH | Inductor_SMD:L_Chilisin_BWVS00606020 | L1 |
| 1 | LED | LED_THT:LED_D3.0mm_Clear | D3 |
| 1 | LM5007MM | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | X322512MSB4SI | PCM_JLCPCB:CRYSTAL-SMD_4P-L3.2-W2.5-BL | X2 |
Similar boards
- 2 layers45 × 33.5 mm
Buck Boost
Gopinath-T-Z/Buck-Converter-LN5007MM
Regulated DC Buck Converter (12V–75V → 10V, 400mA) using LN5007MM PWM controller. Designed in KiCad EDA
14 parts - 4 layers49 × 46 mm
- 4 layers100 × 100 mm
- 4 layers90.2 × 95.9 mm
- 4 layers40 × 50 mm
- 2 layers80 × 60 mm
Mecanum robot board
adammat02/mecanum_robot_board
A compact STM32-based controller board for a four-wheel mecanum robot. It drives four DC gear motors with quadrature-encoder feedback, reads two time-of-flight distance sensors, and breaks out the common serial buses -…
88 parts - 2 layers103.2 × 74.1 mm
Questions
How big is the ModuCard Backplane Sixth Sense PCB?
It measures 153.9 × 128.7 mm and has 4 copper layers, 1.61 mm thick.
What parts does the ModuCard Backplane Sixth Sense use?
133 parts, built around the LM5007MM, FSUSB42UMX, AMS1117 and FE2.1-CQFP48AT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ModuCard Backplane Sixth Sense KiCad files?
From the ArthorH/ModuCard-Backplane-Sixth-Sense repository on GitHub, at the commit this page was made from: the board is ModuCard-Backplane-Sixth-Sense/ModuCard-Backplane-Sixth-Sense.kicad_pcb and its schematic ModuCard-Backplane-Sixth-Sense/CH334R.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ModuCard Backplane Sixth Sense design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArthorH before reusing the design.