Skip to the content
PCBKitNew board
SS510 on a board, in 3D

SS510

MDD

-55℃~+150℃ 100V 1mA@100V 5A 850mV@5A Independent SMA(DO-214AC) Schottky Diodes ROHS

Extended
Category
Schottky Diodes
Package
SMA(DO-214AC)
Pins
2

Overview

The SS510 is a schottky Diode made by MDD in a SMA(DO-214AC) package with 2 pins. -55℃~+150℃ 100V 1mA@100V 5A 850mV@5A Independent SMA(DO-214AC) Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 358,051 are in stock at JLCPCB (part C65010). 18 open-source boards in 18 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

From the datasheet

5
Reverse voltage, most
100 V · Maximum repetitive peak reverse voltage · p. 1
Forward current, most
5 A · Maximum average forward rectified current · p. 1
Forward voltage
850 mV · Maximum instantaneous forward voltage at 5.0 A · p. 1
Junction, hottest
150 °C · Maximum operating junction temperature · p. 1
Junction to air (DO-214AC/SMA)
60 K/W · Typical, PCB mounted with 2.0”x2.0” copper pad areas · p. 1

What it is and has

3
Package
JEDEC DO-214AC/SMA molded plastic body · p. 1
Flammability classification
94V-0 · p. 1
Junction
Metal silicon junction, majority carrier conduction · p. 1

Specifications

12
ParameterConditionsAs printedPage
Maximum repetitive peak reverse voltage VRRMMDD SS510; 25 C ambient unless otherwise specifiedmax 100 V1
Maximum RMS voltage VRMSMDD SS510; 25 C ambient unless otherwise specifiedmax 70 V1
Maximum DC blocking voltage VDCMDD SS510; 25 C ambient unless otherwise specifiedmax 100 V1
Maximum average forward rectified current I(AV)MDD SS510; single phase half-wave 60Hz, resistive or inductive load; for capacitive load current derate by 20%max 5 A1
Peak forward surge current IFSMMDD SS510; 8.3ms single half sine-wave superimposed onrated load (JEDEC Method)max 120 A1
Maximum instantaneous forward voltage at 5.0A VFMDD SS510; 5.0Amax 0.85 V1
Maximum DC reverse current at rated DCblocking voltage IRMDD SS510; TA=25℃max 1 mA1
Maximum DC reverse current at rated DCblocking voltage IRMDD SS510; TA=100℃max 50 mA1
Typical junction capacitance (NOTE 1) CJMDD SS510; measured at 1MHz and applied reverse voltage of 4.0V D.C.typ 300 pF1
Typical thermal resistance (NOTE 2) RJAMDD SS510; DO-214AC/SMA; P.C.B. mounted with 2.0”x2.0”(5.0x5.0cm) copper pad areastyp 60 ℃/W1
Operating junction temperature range TJMDD SS510min -55 · max 150 ℃1
Storage temperature range TSTGMDD SS510min -55 · max 150 ℃1

Parameters

9
Current - Rectified
5A
Diode Configuration
Standalone
Junction Temperature(Max)
150℃
Operating Junction Temperature Range
-55℃~+150℃
Reverse Leakage Current (Ir)
1mA@100V
Thermal Resistance(Junction to Ambient)
60℃/W
Voltage - DC Reverse(Vr)
100V
Voltage - Forward(Vf)
850mV
Voltage - Forward(Vf@If)
850mV@5A

Order codes

1

Pinout

2
The pins of the SS510
PinNameType
1KPassive
2APassive

Open-source boards using it

All 18
  • 2 layers200 × 100 mmAmp600w, the printed circuit board in 3D

    Amp600w

    mx-yah/amp600w

    A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology

    133 parts6
  • 2 layers108 × 110 mmBms active hw, the printed circuit board in 3D

    Bms active hw

    NGOQUOC98/ESP32_PCB

    136 parts1
  • 2 layers71.9 × 99.1 mmInverter, the printed circuit board in 3D

    Inverter

    Abi613/ESC

    3 phase motor bldc driver

    82 parts
  • 2 layers79.3 × 59.8 mmController, the printed circuit board in 3D

    Controller

    Anderman/Renovent

    Display is een liteon De 8 segementen worden in volgorde aan gestuurd met een freq van 500uS Welke segmenten verlicht worden gaat met digit 1 - 4

    74 parts
  • 4 layers100 × 100 mmSmc power, the printed circuit board in 3D

    Smc power

    efebasol/StepperMotorController

    Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).

    104 parts
  • 4 layers100 × 80 mmCharge board, the printed circuit board in 3D

    Charge board

    Franzelfx/vertical-wind-turbine

    Design study: a 3D-printed vertical-axis wind turbine on a timber post, charging a 3S Li-ion pack. Parts, circuit and figures generated by scripts with FreeCAD, KiCad and Blender. Nothing built yet.

    85 parts
  • 4 layers62 × 60 mmTIAGO gripper, the printed circuit board in 3D

    TIAGO gripper

    hardware-designs-iai/tiago_robotiq_adapter

    PCB designs to connect a Robotiq gripper to the TIAGo.

    62 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/mdd/SS510" title="SS510 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/mdd/SS510.jpg" alt="SS510" width="1200" height="900">
A picture that opens the part, for a README
[![SS510](https://pcbkit.io/embed/parts/mdd/SS510.jpg?size=s)](https://pcbkit.io/parts/mdd/SS510)

Questions

Is there a KiCad symbol and footprint for the SS510?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SS510?

SMA(DO-214AC), with 2 pins. Its footprint is drawn on this page.

Where is the SS510 datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the SS510?

JLCPCB lists it as part C65010, with 358,051 in stock; the sellers' links on this page open their listings.

What can replace the SS510?

Parts like it in the library: the SS510 by hongjiacheng, the SS510 by GOODWORK, the SS510 by XUMAO and the SS510 SMA by BORN. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SS510?

18 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8