
Wafel eval board
LVladymyr/WAFEL-Evaluation-Board
Evaluation board for TI BQ76952 multi-chemistry BMS IC

Bms active hw is an open-source printed circuit board by NGOQUOC98, from the NGOQUOC98/ESP32_PCB repository on GitHub. It is a 2-layer board of 108 × 110 mm with 136 parts on 101 nets, routed with 1,063 tracks and 3,200 vias.
It is built around the ESP32-WROOM-32, INA282AID and LM358, with the LM5010AMH, AMS1117-3.3 and BQ76200PW among its other parts. Its parts include 50 resistors, 39 capacitors, 11 diodes, 10 transistors and 9 ICs. It belongs with the power boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10R | Resistor_SMD:R_0805_2012Metric | R2, R7, R39, R40, R41, R42, R45, R46, R47, R48 |
| 9 | 100R | Resistor_SMD:R_0805_2012Metric | R15, R26, R27, R28, R30, R34, R38, R49, R51 |
| 8 | IPT015N10N5 | Package_TO_SOT_SMD:Infineon_PG-HSOF-8-1 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 7 | 10nF/50V | Capacitor_SMD:C_0805_2012Metric | C17, C27, C32, C33, C36, C37, C38 |
| 7 | 1K | Resistor_SMD:R_0805_2012Metric | R17, R19, R23, R24, R31, R32, R33 |
| 6 | 10uF/50V | Capacitor_SMD:C_1210_3225Metric | C8, C9, C18, C19, C31, C39 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C6, C16, C25, C28, C35 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C11, C13, C20, C26 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R3, R9, R13 |
| 4 | 20K | Resistor_SMD:R_0805_2012Metric | R16, R18, R20, R21 |
| 3 | 1.5KExxA | Diode_THT:D_DO-201AE_P15.24mm_Horizontal | D6, D8, D11 |
| 3 | 100nF/50V | Capacitor_SMD:C_0805_2012Metric | C10, C12, C15 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R5, R8, R44 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5, C29, C34 |
| 3 | BZT52B16 | Diode_SMD:D_SOD-123 | D3, D9, D10 |
| 2 | 10M | Resistor_SMD:R_0805_2012Metric | R37, R50 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D4, D7 |
| 2 | 1nF/50V | Capacitor_SMD:C_0805_2012Metric | C21, C22 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 1uF/50V | Capacitor_SMD:C_0805_2012Metric | C7, C14 |
| 2 | 200K | Resistor_SMD:R_0805_2012Metric | R6, R10 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SS510 | Diode_SMD:D_SMA | D1, D5 |
| 1 | 0.001R | foot:R0.001ohm | R_shunt1 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 10R-1206 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric | C3 |
| 1 | 10uF/25V | Capacitor_SMD:C_1206_3216Metric | C24 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R43 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 1R-1206 | Resistor_SMD:R_1206_3216Metric | R22 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric | R36 |
| 1 | 2.2uF/50V | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 32768 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 47uH/3A-6030SMD | Inductor_SMD:L_Bourns_SRR1210A | L1 |
| 1 | 600Ohm | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | BAT+ | foot:PACK | J4 |
| 1 | BAT- | foot:PACK | J3 |
| 1 | BQ76200PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U8 |
| 1 | BZT52B75 | Diode_SMD:D_SOD-123 | D2 |
| 1 | CAN BUS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | CR1220 | footrint_BMS:BAT_CR1220_Holder | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | DS1307N+ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM | footrint_BMS:ESP32-WROVER-WROOM32 | U1 |
| 1 | EXT CELL | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | FLASH | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | INA282 | foot:INA282AID | U7 |
| 1 | ISO1044 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | LM358 | foot:LM358M | U4 |
| 1 | LM5010A | Package_SO:HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3.1mm | U3 |
| 1 | MORNSUN-B0505XT-1WR2 | foot:Converter_DCDC_B0505 | PS1 |
| 1 | PACK+ | foot:PACK | J8 |
| 1 | PACK- | foot:PACK | J9 |
| 1 | SW_DIP_x02 | foot:SW_PUSH_6mm_H5mm | SW1 |
| 1 | TFT_LCD | foot:TFT_DISLAY | J1 |
| 1 | TLP127 | Package_SO:MFSOP6-4_4.4x3.6mm_P1.27mm | U5 |
| 1 | logo | footrint_BMS:logo-flametech-v1 | H1 |
It measures 108 × 110 mm and has 2 copper layers, 1.6 mm thick.
136 parts, built around the ESP32-WROOM-32, INA282AID, LM358 and LM5010AMH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NGOQUOC98/ESP32_PCB repository on GitHub, at the commit this page was made from: the board is bms-active-hw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NGOQUOC98 before reusing the design.

LVladymyr/WAFEL-Evaluation-Board
Evaluation board for TI BQ76952 multi-chemistry BMS IC


fl4p/dcdc-parasitics
KiCad → FastHenry extractor for half-bridge power-stage parasitics (commutation-loop L, common-source inductance, gate-loop L/R) → SPICE subckt + SVG schematic




paulmartinezcuenta/UltiCore-V1-PLC
Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.
